Three novel wideband antennas suitable for DTV (Digital Television) signal reception in the 470 ~ 806 MHz band for Portable Media Playrer (PMP) applications are presented in this thesis. The antennas include a novel broadband planar monopole antenna in Chpater 2, a novel low-profile planar inverted-U monopole antenna in Chpater 3, and a novel internal planar inverted-F antenna in Chpater 4. These antennas all have wide impedance bandwidths, good radiation efficiencies, and good radiation patterns. In addition, we propose a one-layer simplified hand model for achieving efficient and reliable simulation study for PMP antennas. The studied antenna in Chapter 2 is selected to be the example to study the user¡¦s hand effect on the antenna for PMP application.

A six-band antenna design for the mobile phone is presented. The required bandwidth for DTV/GSM850/900/DCS/PCS/UMTS operation is achieved by using two antennas. For DTV/GSM850/900 operation, we propose a novel antenna by using the concept of the dipole antenna and an internal matching portion to excite the half- and one-wavelength resonant modes of the antenna. With the internal matching portion, the frequency ratio of the two resonant modes can be controlled, thereby making the two resonant modes formed into a very wide operating band. For DCS/PCS/UMTS operation, a novel monopole slot antenna is used. The lower-edge frequency of the slot antenna depends on its length and the required bandwidth can be achieved by adjusting its tuning section. Effects of casing and human body on the proposed mobile phone antenna are also discussed. It is found that the radiation efficiency of DTV/GSM bands is larger than that of DCS/PCS/UMTS bands in this design. However, overall the operating bands, the antenna performances are greatly affected when the human effects are taken into considerations.

The study in this thesis focuses on the DTV antennas for mobile applications. By using the novel techniques in the proposed antenna, the narrow-band problem and the radiation pattern of the conventional DTV antenna can be improved. In the first design, the antenna comprises two radiating arms. By adjusting the open gap between the ends of the two radiating arms, large impedance bandwidth can be obtained for DTV signal reception. In the second design, by integrating a coupling portion into the dipole antenna, the full-wavelength resonant mode can be excited successfully and combined with the half-wavelength mode to form a wide operating band. Finally, in the third design, a U-shaped feeding gap is embedded within the V-shaped antenna to excite the full-wavelength resonant mode. Additionally, the dipole antenna can radiate comparable E£X and E£c components, resulting in no nulls in the total-power radiation patterns in the horizontal and vertical planes.