Spelling suggestions: "subject:"data set"" "subject:"mata set""
1 |
Sampling designs for exploratory multivariate analysisHopkins, Julie Anne January 2000 (has links)
This thesis is concerned with problems of variable selection, influence of sample size and related issues in the applications of various techniques of exploratory multivariate analysis (in particular, correspondence analysis, biplots and canonical correspondence analysis) to archaeology and ecology. Data sets (both published and new) are used to illustrate these methods and to highlight the problems that arise - these practical examples are returned to throughout as the various issues are discussed. Much of the motivation for the development of the methodology has been driven by the needs of the archaeologists providing the data, who were consulted extensively during the study. The first (introductory) chapter includes a detailed description of the data sets examined and the archaeological background to their collection. Chapters Two, Three and Four explain in detail the mathematical theory behind the three techniques. Their uses are illustrated on the various examples of interest, raising data-driven questions which become the focus of the later chapters. The main objectives are to investigate the influence of various design quantities on the inferences made from such multivariate techniques. Quantities such as the sample size (e.g. number of artefacts collected), the number of categories of classification (e.g. of sites, wares, contexts) and the number of variables measured compete for fixed resources in archaeological and ecological applications. Methods of variable selection and the assessment of the stability of the results are further issues of interest and are investigated using bootstrapping and procrustes analysis. Jack-knife methods are used to detect influential sites, wares, contexts, species and artefacts. Some existing methods of investigating issues such as those raised above are applied and extended to correspondence analysis in Chapters Five and Six. Adaptions of them are proposed for biplots in Chapters Seven and Eight and for canonical correspondence analysis in Chapter Nine. Chapter Ten concludes the thesis.
|
2 |
Inflation in South Africa: 1921 to 2006. History, measurement and credibilityRossouw, Johannes Jacobus January 2007 (has links)
Philosophiae Doctor - PhD / This study reports the development and use of an original methodology to measure inflation
credibility, as well as the first results of such measurement in terms of an inflation credibility
barometer. The barometer is an instrument measuring the degree of acceptance of the accuracy
of historic inflation figures. Despite the lack of knowledge about inflation and the low inflation
credibility recorded by this first calculation of an inflation credibility barometer for South Africa,
valuable information about inflation is unveiled to the authorities. The research results serve as a
benchmark, but cannot be compared to earlier research, as this study represents the first
systematic measurement of inflation credibility in South Africa.
The barometer yields better results than the limited current international measurement of
perceptions of the accuracy of historic inflation figures. The barometer (i) reports the credibility
of inflation figures as a figure between zero and 100; (ii) will highlight changes in credibility
over time with repeated use; (iii) can be explained easily to the general public; (iv) provides for
international comparison between countries; and (v) can be used by all countries. The use of
inflation credibility barometers and changes in barometer readings over time can also serve as an
early warning system for changes in inflation perceptions that might feed through to inflation
expectations.
|
3 |
A Tree-based Summarization Framework For Differences Between Two Data SetsWang, Dong 21 January 2009 (has links)
No description available.
|
4 |
DISCOVERY OF LINEAR TRAJECTORIES IN GEOGRAPHICALLY DISTRIBUTED DATASETSJHAVER, RISHI January 2003 (has links)
No description available.
|
5 |
Fuzzy voting in clusteringDimitriadou, Evgenia, Weingessel, Andreas, Hornik, Kurt January 1999 (has links) (PDF)
In this paper we present a fuzzy voting scheme for cluster algorithms. This fuzzy voting method allows us to combine several runs of cluster algorithms resulting in a common fuzzy partition. This helps us to overcome instabilities of the cluster algorithms and results in a better clustering. / Series: Report Series SFB "Adaptive Information Systems and Modelling in Economics and Management Science"
|
6 |
Finding delta difference in large data setsArvidsson, Johan January 2019 (has links)
To find out what differs between two versions of a file can be done with several different techniques and programs. These techniques and programs are often focusd on finding differences in text files, in documents, or in class files for programming. An example of a program is the popular git tool which focuses on displaying the difference between versions of files in a project. A common way to find these differences is to utilize an algorithm called Longest common subsequence, which focuses on finding the longest common subsequence in each file to find similarity between the files. By excluding all similarities in a file, all remaining text will be the differences between the files. The Longest Common Subsequence is often used to find the differences in an acceptable time. When two lines in a file is compared to see if they differ from each other hashing is used. The hash values for each correspondent line in both files will be compared. Hashing a line will give the content on that line a unique value. If as little as one character on a line is different between the version, the hash values for those lines will be different as well. These techniques are very useful when comparing two versions of a file with text content. With data from a database some, but not all, of these techniques can be useful. A big difference between data in a database and text in a file will be that content is not just added and delete but also updated. This thesis studies the problem on how to make use of these techniques when finding differences between large datasets, and doing this in a reasonable time, instead of finding differences in documents and files. Three different methods are going to be studied in theory. These results will be provided in both time and space complexities. Finally, a selected one of these methods is further studied with implementation and testing. The reason only one of these three is implemented is because of time constraint. The one that got chosen had easy maintainability, an easy implementation, and maintains a good execution time.
|
7 |
An examination of indexes for determining the number of clusters in binary data setsWeingessel, Andreas, Dimitriadou, Evgenia, Dolnicar, Sara January 1999 (has links) (PDF)
An examination of 14 indexes for determining the number of clusters is conducted on artificial binary data sets being generated according to various design factors. To provide a variety of clustering solutions the data sets are analyzed by different non hierarchical clustering methods. The purpose of the paper is to present the performance and the ability of an index to detect the proper number of clusters in a binary data set under various conditions and different difficulty levels. (author's abstract) / Series: Working Papers SFB "Adaptive Information Systems and Modelling in Economics and Management Science"
|
8 |
Advances in imbalanced data learningLu, Yang 29 August 2019 (has links)
With the increasing availability of large amount of data in a wide range of applications, no matter for industry or academia, it becomes crucial to understand the nature of complex raw data, in order to gain more values from data engineering. Although many problems have been successfully solved by some mature machine learning techniques, the problem of learning from imbalanced data continues to be one of the challenges in the field of data engineering and machine learning, which attracted growing attention in recent years due to its complexity. In this thesis, we focus on four aspects of imbalanced data learning and propose solutions to the key problems. The first aspect is about ensemble methods for imbalanced data classification. Ensemble methods, e.g. bagging and boosting, have the advantages to cure imbalanced data by integrated with sampling methods. However, there are still problems in the integration. One problem is that undersampling and oversampling are complementary each other and the sampling ratio is crucial to the classification performance. This thesis introduces a new method HSBagging which is based on bagging with hybrid sampling. Experiments show that HSBagging outperforms other state-of-the-art bagging method on imbalanced data. Another problem is about the integration of boosting and sampling for imbalanced data classification. The classifier weights of existing AdaBoost-based methods are inconsistent with the objective of class imbalance classification. In this thesis, we propose a novel boosting optimization framework GOBoost. This framework can be applied to any boosting-based method for class imbalance classification by simply replacing the calculation of classifier weights. Experiments show that the GOBoost-based methods significantly outperform the corresponding boosting-based methods. The second aspect is about online learning for imbalanced data stream with concept drift. In the online learning scenario, if the data stream is imbalanced, it will be difficult to detect concept drifts and adapt the online learner to them. The ensemble classifier weights are hard to adjust to achieve the balance between the stability and adaptability. Besides, the classier built on samples in size-fixed chunk, which may be highly imbalanced, is unstable in the ensemble. In this thesis, we propose Adaptive Chunk-based Dynamic Weighted Majority (ACDWM) to dynamically weigh the individual classifiers according to their performance on the current data chunk. Meanwhile, the chunk size is adaptively selected by statistical hypothesis tests. Experiments on both synthetic and real datasets with concept drift show that ACDWM outperforms both of the state-of-the-art chunk-based and online methods. In addition to imbalanced data classification, the third aspect is about clustering on imbalanced data. This thesis studies the key problem of imbalanced data clustering called uniform effect within the k-means-type framework, where the clustering results tend to be balanced. Thus, this thesis introduces a new method called Self-adaptive Multi-prototype-based Competitive Learning (SMCL) for imbalanced clusters. It uses multiple subclusters to represent each cluster with an automatic adjustment of the number of subclusters. Then, the subclusters are merged into the final clusters based on a novel separation measure. Experimental results show the efficacy of SMCL for imbalanced clusters and the superiorities against its competitors. Rather than a specific algorithm for imbalanced data learning, the final aspect is about a measure of class imbalanced dataset for classification. Recent studies have shown that imbalance ratio is not the only cause of the performance loss of a classifier in imbalanced data classification. To the best of our knowledge, there is no any measurement about the extent of influence of class imbalance on the classification performance of imbalanced data. Accordingly, this thesis proposes a data measure called Bayes Imbalance Impact Index (B1³) to reflect the extent of influence purely by the factor of imbalance for the whole dataset. As a result we can therefore use B1³ to judge whether it is worth using imbalance recovery methods like sampling or cost-sensitive methods to recover the performance loss of a classifier. The experiments show that B1³ is highly consistent with improvement of F1score made by the imbalance recovery methods on both synthetic and real benchmark datasets. Two ensemble frameworks for imbalanced data classification are proposed for sampling rate selection and boosting weight optimization, respectively. 2. •A chunk-based online learning algorithm is proposed to dynamically adjust the ensemble classifiers and select the chunk size for imbalanced data stream with concept drift. 3. •A multi-prototype competitive learning algorithm is proposed for clustering on imbalanced data. 4. •A measure of imbalanced data is proposed to evaluate how the classification performance of a dataset is influenced by the factor of imbalance.
|
9 |
Odhad výkonnosti diskových polí s využitím prediktivní analytiky / Estimating performance of disk arrays using predictive analyticsVlha, Matej January 2017 (has links)
Thesis focuses on disk arrays, where the goal is to design test scenarios to measure performance of disk array and use predictive analytics tools to train a model that will predict the selected performance parameter on a measured set of data. The implemented web application demonstrates the functionality of the trained model and shows estimate of the disk array performance.
|
10 |
Data cleaning techniques for software engineering data setsLiebchen, Gernot Armin January 2010 (has links)
Data quality is an important issue which has been addressed and recognised in research communities such as data warehousing, data mining and information systems. It has been agreed that poor data quality will impact the quality of results of analyses and that it will therefore impact on decisions made on the basis of these results. Empirical software engineering has neglected the issue of data quality to some extent. This fact poses the question of how researchers in empirical software engineering can trust their results without addressing the quality of the analysed data. One widely accepted definition for data quality describes it as `fitness for purpose', and the issue of poor data quality can be addressed by either introducing preventative measures or by applying means to cope with data quality issues. The research presented in this thesis addresses the latter with the special focus on noise handling. Three noise handling techniques, which utilise decision trees, are proposed for application to software engineering data sets. Each technique represents a noise handling approach: robust filtering, where training and test sets are the same; predictive filtering, where training and test sets are different; and filtering and polish, where noisy instances are corrected. The techniques were first evaluated in two different investigations by applying them to a large real world software engineering data set. In the first investigation the techniques' ability to improve predictive accuracy in differing noise levels was tested. All three techniques improved predictive accuracy in comparison to the do-nothing approach. The filtering and polish was the most successful technique in improving predictive accuracy. The second investigation utilising the large real world software engineering data set tested the techniques' ability to identify instances with implausible values. These instances were flagged for the purpose of evaluation before applying the three techniques. Robust filtering and predictive filtering decreased the number of instances with implausible values, but substantially decreased the size of the data set too. The filtering and polish technique actually increased the number of implausible values, but it did not reduce the size of the data set. Since the data set contained historical software project data, it was not possible to know the real extent of noise detected. This led to the production of simulated software engineering data sets, which were modelled on the real data set used in the previous evaluations to ensure domain specific characteristics. These simulated versions of the data set were then injected with noise, such that the real extent of the noise was known. After the noise injection the three noise handling techniques were applied to allow evaluation. This procedure of simulating software engineering data sets combined the incorporation of domain specific characteristics of the real world with the control over the simulated data. This is seen as a special strength of this evaluation approach. The results of the evaluation of the simulation showed that none of the techniques performed well. Robust filtering and filtering and polish performed very poorly, and based on the results of this evaluation they would not be recommended for the task of noise reduction. The predictive filtering technique was the best performing technique in this evaluation, but it did not perform significantly well either. An exhaustive systematic literature review has been carried out investigating to what extent the empirical software engineering community has considered data quality. The findings showed that the issue of data quality has been largely neglected by the empirical software engineering community. The work in this thesis highlights an important gap in empirical software engineering. It provided clarification and distinctions of the terms noise and outliers. Noise and outliers are overlapping, but they are fundamentally different. Since noise and outliers are often treated the same in noise handling techniques, a clarification of the two terms was necessary. To investigate the capabilities of noise handling techniques a single investigation was deemed as insufficient. The reasons for this are that the distinction between noise and outliers is not trivial, and that the investigated noise cleaning techniques are derived from traditional noise handling techniques where noise and outliers are combined. Therefore three investigations were undertaken to assess the effectiveness of the three presented noise handling techniques. Each investigation should be seen as a part of a multi-pronged approach. This thesis also highlights possible shortcomings of current automated noise handling techniques. The poor performance of the three techniques led to the conclusion that noise handling should be integrated into a data cleaning process where the input of domain knowledge and the replicability of the data cleaning process are ensured.
|
Page generated in 0.061 seconds