Spelling suggestions: "subject:"delftia acidovorax"" "subject:"delftia oleovorans""
1 |
Avaliação da diversidade microbiana presente em sistema gerador de água purificada dedicado à produção de penicilínicos em Farmanguinhos - Fiocruz / Evaluation of microbial diversity present in purified water generator system dedicated to the production of penicillin in Farmanguinhos - FiocruzCosta, Luciana Veloso da January 2014 (has links)
Made available in DSpace on 2016-03-04T13:55:12Z (GMT). No. of bitstreams: 2
7.pdf: 2671790 bytes, checksum: 3ea789720d5aa831716c6bfe2ca4f9b6 (MD5)
license.txt: 1748 bytes, checksum: 8a4605be74aa9ea9d79846c1fba20a33 (MD5)
Previous issue date: 2014 / Fundação Oswaldo Cruz. Instituto de Tecnologia em Fármacos/Farmanguinhos. Rio de Janeiro, RJ, Brasil. / O Instituto de Tecnologia em Fármacos (Farmanguinhos), unidade técnico-científica da Fundação Oswaldo Cruz, representa o maior laboratório farmacêutico oficial vinculado ao Ministério da Saúde brasileiro responsável pela produção de mais de um bilhão de medicamentos por ano. As legislações sanitárias vigentes definem que devem ser utilizadas instalações segregadas e dedicadas para a produção de medicamentos, como penicilinas, minimizando os riscos de contaminação cruzada, que consequentemente possam gerar danos à saúde. Por isso, Farmanguinhos possui, atualmente, uma área dedicada à produção de amoxicilina, assim como o sistema gerador de água purificada, que atende à referida fabricação, também é dedicado à mesma. A água é a matéria-prima de mais elevado volume empregada na produção farmacêutica, exercendo profundo impacto na qualidade do produto e na segurança do paciente. O controle microbiológico da qualidade da água utilizada em processos farmacêuticos torna-se fundamental, já que micro-organismos podem sobreviver e proliferar em sistemas de água, tornando-se fontes de contaminação microbiana e pirogênica. A identificação destes micro-organismos e as informações obtidas sobre os mesmos podem ser extremamente úteis na identificação da fonte de contaminação microbiana de um produto ou processo, alem de direcionar ações corretivas, se necessário. O objetivo deste trabalho foi avaliar a diversidade microbiana presente em sistema gerador de água purificada, dedicado à produção de penicilínicos, de Farmanguinhos. Para isto, as amostras de água coletadas a partir do ponto de entrada, ponto de água potável, e do ponto de saída do sistema, ponto de água purificada, foram analisadas microbiologicamente quanto à contagem de micro-organismos mesófilos e quanto à presença de patógenos: Escherichia coli; coliformes totais e Pseudomonas aeruginosa. As amostras foram analisadas entre janeiro e maio de 2013. Todas as colônias obtidas foram isoladas e submetidas à identificação, através de equipamento MALDI-TOF. Não foram observados resultados acima da especificação para ambos os pontos, no período analisado. Do ponto de água potável foram isoladas apenas três espécies bacterianas: Bacillus cereus, Delftia acidovorans e Acinetobacter sp. Uma diversidade microbiana maior foi isolada a partir do ponto de água purificada, como: Burkholderia sp, Delftia acidovorans, Stenotrophomonas maltophilia, Bacillus cereus, Pseudomonas oryzihabitans e Pseudomonas putida. A espécie Delftia acidovorans, associada a fenômenos de biocorrosão foi o micro-organismo mais encontrado, sendo identificado em cerca de 1/3 do total de isolados. O sistema de água de Farmanguinhos é sanitizado mensalmente com sanitizante à base de glutaraldeído. Pode-se concluir que a sanitização está sendo eficiente para manter a contagem total de micro-organismos mesófilos dentro dos limites especificados. No entanto, algumas ações podem ser tomadas para evitar a presença de biofilmes, o que aprimorará ainda mais a qualidade da água purificada gerada. / The Instituto de Tecnologia em Fármacos (Farmaguinhos), technical- scientific unit of
Fundação Oswaldo Cruz, is the largest official pharmaceutical laboratory under the Brazilian
Ministry of Health responsible for producing more than one billion drugs per year. The
current sanitary laws define that segregated facilities must be dedicated and used for the
production of drugs such as penicillin, thus the risk of serious damage to health, due to crosscontamination,
can be minimized. Because of this, Farmanguinhos has a dedicated production
of amoxicillin, as well as a purified water generator system that caters to such manufacturing is also dedicated to this area. Water is the raw material of the highest volume used in
pharmaceutical production so that it has a profound impact on the product quality and patient
safety. Therefore, the microbiological quality control of water used in pharmaceutical
processes becomes crucial, since microorganisms can survive and proliferate in water
systems, becoming sources of microbial and pyrogenic contamination. The identification of
these microorganisms and the information obtained about them can be extremely useful in
identifying the source of microbial contamination of a product or process, in addition to direct
corrective actions, if necessary. The objective of this study was to evaluate the microbial
diversity present in the purified water generator system, dedicated to the area of
manufacturing penicillin-based drugs of Farmanguinhos. To aim this objective, water samples
collected from the entry point of the system, point of drinking water, and the point of
departure, point of purified water, were analyzed microbiologically for the count of
mesophilic and for the presence of pathogens: Escherichia coli; coliforms and Pseudomonas
aeruginosa, respectively. The samples were analyzed between January and May of 2013. All
colonies obtained were isolated and subjected to identification by MALDI - TOF equipment.
No results above specification for both points were observed in the analyzed period. From the
point of drinking water only three bacterial species were isolated: Bacillus cereus,
Acinetobacter sp and Delftia acidorovans. A higher microbial diversity was observed from
the purified water source, such as Burkholderia sp, Delftia acidovorans, Stenotrophomonas
maltophilia, Bacillus cereus, Pseudomonas putida and Pseudomonas oryzihabitans. The
species Delftia acidovorans associated with biocorrosion phenomena was the microorganism
most frequently found and was identified in about 1/3 of the total isolates. The water system of Farmaguinhos water is sanitized monthly with sanitizing agent comprising glutaraldehyde. It can be concluded that sanitization is being effective to maintain the total count of mesophilic within the specified limits. However, some actions can be taken to avoid the presence of biofilms, which will improve even more the quality of purified water generated.
|
2 |
Biotechnologická produkce poly(3-hydroxybutyratu-co-4-hydroxybutyratu) [P(3HB-co-4HB)] / Microbial synthesis of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)]Dugová, Hana January 2020 (has links)
This diploma thesis studied the ability of Cupriavidus malaysiensis, Delftia acidovorans and Azohydromonas lata to produce poly(3-hydroxybutyrate-co-4-hydroxybutyrate), [P(3HB-co-4HB)], by using -butyrolactone and 1,4-butanediol as carbon substrates. The objective of this work was the production and characterisation of isolated polyhydroxyalkanoates (PHA). The theoretical part deals with the basic description and classification of polyhydroxyalkanoates. Next, the biosyntheses of the most investigated PHAs were described. The practical section of the work discusses and presents the output of the cultivation of five bacterial strains selected for the production of [P(3HB-co-4HB)], namely, Cupriavidus malaysiensis (DSM 19379), Delftia acidovorans (DSM 39), Delftia acidovorans (CCM 2410), Delftia acidovorans (CCM 283) and Azohydromonas lata (CCM 4448). The effect of the modified cultivation conditions for each of the used bacteria on the PHA production yields was discussed. The produced biomass after the cultivation was characterised spectrophotometrically, gravimetrically and by gas chromatography. Polymers were isolated from the biomass by the extraction in chloroform. The isolated polymers were characterised from the viewpoint of chemical composition, molecular weight and thermal properties by using Attenuated total reflection infrared spectroscopy, Size exclusion chromatography, Differential scanning calorimetry and Thermogravimetric analysis.
|
3 |
Studium biodegradace polyhydroxyalkanoátů. / Study of biodegradation of poly(hydroxy alkanoates).Wurstová, Agáta January 2014 (has links)
The master‘s thesis is focused on the study of biodegradation of polyhydroxyalkanoates, namely polymer polyhydroxybutyrate. The first part of the thesis is focused on the study of biodegradation of polyhydroxybutyrate in the form of crystalline granules of PHB and PHB films using selected species of microorganisms from bacteria, yeasts and fungi. As a representative of bacteria was chosen microorganism Delftia acidorovans, as yeast was selected Aureobasidium pullulans and Aspergillus fumigatus as fungi. PHB depolymerase activity was measured employing turbidemtiric method with suspension of PHB granules as substrate. The results showed that D. acidorovans can partially degrade PHB. On the contrary A. pullulans cannot effectively degrade PHB. The most significant degradation ability revealed A. fumigatus, which was able to degrade PHB completely. Extracellular enzymes excreted by these microorganisms when cultivated on PHB materials as sole carbon sources were analyzed by SDS-PAGE. The second part of the thesis deals with the biodegradation of PHB in the form of PHB film, PHB hardened foil and PHB Nanoul fabric using standard composting test. Semi-solid cultivation showed positive results. In the interval from 14 days to two months were all forms of the PHB completely biodegraded. With semi-solid cultivation was also studied biodegradation rate of the polyurethane elastomeric films which were modified by partial replacement of polyester polyol by PHB. The test samples were prepared using PHB from Sigma and the PHB samples prepared at the Faculty of chemistry VUT. Samples with different concentrations of the dispersed PHB (1 %, 5 % and 10 %) in the polyurethane were also object of the study. At the end of the cultivation (after 2 months) were measured mechanical properties in tension of the material, then efficiency of biodegradation by gravimetric analysis and modification of the material surface by microscopic analysis.
|
Page generated in 0.0496 seconds