Spelling suggestions: "subject:"demandside"" "subject:"hexandraside""
1 |
Determinants and Impacts of Demand-side Management Program Investment of Electric UtilitiesDegens, Philipp 01 January 1996 (has links)
From the late seventies through the early 1990's electric utilities were facing many different forces that caused them to invest into demand-side management programs (DSM). Roots of the growth of DSM can be found in the high inflation and energy price shocks of the late seventies and early eighties, spiraling building costs of generation, safety and environmental concerns, increased costs of new capacity with possible exhaustion of scale economies, unexpected high elasticity in the demand for electricity, and public utility commissions that sought alternatives to the resulting high rate increases. This study develops and estimates four equations that look at the more aggregate utility level impacts of DSM. The goal of two equations is to determine what factors influence utility investments in DSM and if stock market investment in utilities is affected by DSM. Two additional equations are developed to determine system level impacts of DSM on cost of and quantity demanded of electricity. To estimate these models four years of annual data were collected for 81 utilities spanning 1990-1993. These utilities have sold over 60% of all the electricity in the US and were responsible for over 80% the national spending in DSM. The DSM investment model indicated that of the major variance in DSM investment is due to the utility's regulatory environment. Both an above average regulatory climate and least-cost planning requirements had major impacts on the level of DSM investment. The cost of equity capital equation revealed that DSM expenditures had a positive impact on the valuation of utility's stock. Cost and quantity equations were estimated both individually and simultaneously. DSM expenditures seemed to have a negative impact on both average cost and quantity demanded. Although these relationships were statistically significant, the impacts were quite small. To summarize; the regulatory environment seems to have the strongest impact on the level of DSM investment; DSM spending was associated with an increased stock valuation; as expected DSM investments were found to have a negative relationship with quantity demanded; and finally DSM investment appeared to reduce the average cost.
|
2 |
The modelling of energy efficient drying for DSMGilmour, James Ewan January 1999 (has links)
This thesis investigates the modelling of drying processes for the promotion of market-led Demand Side Management (DSM) as applied to the UK Public Electricity Suppliers. A review of DSM in the electricity supply industry is provided, together with a discussion of the relevant drivers supporting market-led DSM and energy services (ES). The potential opportunities for ES in a fully deregulated energy market are outlined. It is suggested that targeted industrial sector energy efficiency schemes offer significant opportunity for long term customer and supplier benefit. On a process level, industrial drying is highlighted as offering significant scope for the application of energy services. Drying is an energy-intensive process used widely throughout industry. The results of an energy survey suggest that 17.7 per cent of total UK industrial energy use derives from drying processes. Comparison with published work indicates that energy use for drying shows an increasing trend against a background of reducing overall industrial energy use. Airless drying is highlighted as offering potential energy saving and production benefits to industry. To this end, a comprehensive review of the novel airless drying technology and its background theory is made. Advantages and disadvantages of airless operation are defined and the limited market penetration of airless drying is identified, as are the key opportunities for energy saving. Limited literature has been found which details the modelling of energy use for airless drying. A review of drying theory and previous modelling work is made in an attempt to model energy consumption for drying processes. The history of drying models is presented as well as a discussion of the different approaches taken and their relative merits. The viability of deriving energy use from empirical drying data is examined. Adaptive neuro fuzzy inference systems (ANFIS) are successfully applied to the modelling of drying rates for 3 drying technologies, namely convective air, heat pump and airless drying. The ANFIS systems are then integrated into a novel energy services model for the prediction of relative drying times, energy cost and atmospheric carbon dioxide emission levels. The author believes that this work constitutes the first to use fuzzy systems for the modelling of drying performance as an energy services approach to DSM. To gain an insight into the 'real world' use of energy for drying, this thesis presents a unique first-order energy audit of every ceramic sanitaryware manufacturing site in the UK. Previously unknown patterns of energy use are highlighted. Supplementary comments on the timing and use of drying systems are also made. The limitations of such large scope energy surveys are discussed.
|
3 |
A performance-centered maintenance strategy for industrial DSM projects / Hendrik Johannes GroenewaldGroenewald, Hendrik Johannes January 2015 (has links)
South Africa’s electricity supply is under pressure because of inadequate capacity expansion in the early 2000s. One of the initiatives funded by Eskom to alleviate the pressure on the national electricity grid was an aggressive demand-side management (DSM) programme that commenced in 2004. A positive outcome of the DSM programme was that the industrial sector in South Africa benefited from the implementation of a relatively large number of DSM projects. These DSM projects reduced the electricity costs of industrial clients and reduced the demand on the national electricity grid.
Unfortunately, the performance of industrial DSM projects deteriorates without proper maintenance. This results in wasted savings opportunities that are costly to industrial clients and Eskom. The purpose of this study was therefore to develop a maintenance strategy that could be applied, firstly, to reverse the deterioration of DSM project performance and, secondly, to sustain and to improve DSM project performance. The focus of the maintenance strategy was to obtain maximum project performance that translated to maximum electricity cost savings for the client.
A new performance-centered maintenance (PCM) strategy was developed and proven through practical experience in maintaining industrial DSM projects over a period of more than 60 months. The first part of the PCM strategy consisted of developing a new strategy for the outsourcing of DSM project maintenance to energy services companies (ESCOs) on the company group level of the client. The strategy served as a guideline for both ESCOs and industrial clients to implement and manage a group-level DSM maintenance agreement successfully.
The second part of the PCM strategy consisted of a simplified method that was developed to identify DSM projects where applying a PCM strategy would increase or sustain electricity cost savings. The third part of the PCM strategy consisted of practical maintenance guidelines that were developed to ensure maximum project performance. It was based on the plan-do-check-act cycle for continuous improvement with an emphasis on the monitoring of DSM project performance. The last part of the PCM strategy consisted of various alternative key performance indicators that should be monitored to ensure maximum sustainable DSM project performance.
The PCM strategy was evaluated by implementing it on ten different DSM projects. The results showed that applying a PCM strategy resulted in an average increase of 64.4% in the electricity cost savings generated by these projects. The average implementation cost of the PCM strategy was 6% of the total benefit generated through it. This indicated that implementing the PCM strategy was a cost-effective manner to ensure that maximum performance of DSM projects was maintained sustainably. / PhD (Computer and Electronic Engineering), North-West University, Potchefstroom Campus, 2015
|
4 |
Analysing electricity cost saving opportunities on South African gold processing plants / Waldt HamerHamer, Waldt January 2014 (has links)
Costs saving measures are important for South African gold producers due to increasing energy costs and decreasing production volumes. Demand Side Management (DSM) is an effective strategy to reduce electricity consumption and costs. DSM projects have been implemented widely on South African mining systems such as pumping, refrigeration, rock transport and compressed air. Implementations have, however, been limited on gold processing plants despite the significant amounts of energy that this section consumes.
The main objective of gold processing plants is production orientated and energy management is not a primary focus. This rationale is re-evaluated owing to high electricity price inflation and availability of DSM incentives. This study investigated the cost saving potential of DSM interventions on gold plants. Electrical load management was identified as a key opportunity that can deliver substantial cost savings. These savings were shown to be feasible in respect of the required capital expenditure, effort of implementation and maintenance of operational targets.
Investigation procedures were compiled to identify feasible load management opportunities. The most potential for electricity cost savings was identified on comminution equipment. Consequently, a methodology was developed to implement electrical load management on the identified sections. The methodology proposed simulation techniques that enabled load management and subsequent electricity cost optimisation through production planning.
Two electrical load management case studies were successfully implemented on comminution equipment at two gold processing plants. Peak period load shift of 3.6 MW and 0.6 MW, respectively, was achieved on average for a period of three months. The annual cost savings of these applications
could amount to R1.4-million and R 660 000. This results in specific electricity cost reductions of 3% and 7% for the two respective case studies.
Results from the two case studies are an indication of potential for electrical load management on South African gold processing plants. If an average electricity cost saving of 5% is extrapolated across the South African gold processing industry, the potential cost savings amount to R 25-million per annum. Although the costs saving opportunities are feasible, it is influenced by the reliability of the equipment and the dynamics of ore supply. This insight plays a decisive role in determining the feasibility of DSM on gold processing plants. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015
|
5 |
Challenges faced during implementation of a compressed air energy savings project on a gold mine / Gerhardus Petrus HeynsHeyns, Gerhardus Petrus January 2014 (has links)
MIng (Electrical and Electronic Engineering), North-West University, Potchefstroom Campus, 2015 / Demand side management (DSM) initiatives have been introduced by Eskom to reduce the
deficit between the electricity generation capacity and the electricity usage within the country.
DSM projects enable Eskom to reduce electricity demand instead of increasing generation
capacity. DSM projects are more economical and can be implemented much faster than
constructing a new power station.
One particular industry where DSM projects can be implemented is on mines. Mines consume
about 14.5% of South Africa’s electricity. Producing compressed air, in particular, is one of the
largest electricity users on mines. It consumes 17% of the electricity used on mines. The
opportunity, therefore, arises to implement DSM projects on the compressed air system of mines.
Not only do these projects reduce Eskom’s high electricity demand, but they also induce
financial and energy savings for the mine itself.
However, during the implementation of a compressed air energy savings project, various
challenges arise. These include, among others, operational changes, control limitations, industrial
actions and installation delays. All of these can lead to a project not being delivered on time,
within budget or with quality results.
The purpose of this study is to investigate and address various problems that occur during the
implementation of such a compressed air energy savings project. The study shows that although
these problems have an impact on the results achievable with the project, significant savings are
still possible.
Project savings are achieved by reducing the amount of compressed air that is supplied, thereby
delivering sufficient compressed air while minimising the amount of compressed air being
wasted. During this study, a gold mine’s compressed air network was optimised. The
optimisation resulted in an evening peak-clip saving of 2.61 MW. This saving was achieved
daily between 18:00 and 20:00 when Eskom’s electricity demand was at its highest. It is
equivalent to an annual cost saving of R1.46 million based on Eskom’s 2014/2015 tariffs. When
savings from all periods throughout the day are taken into account, the project will produce an
annual cost saving of R1.91 million.
|
6 |
Analysing the effect of DSM projects at South African cement factories / Johannes Paulus SpangenbergSpangenberg, Johannes Paulus January 2015 (has links)
In any developing country an increasingly higher demand for electricity supply exists. South Africa experienced load shedding during late 2007 and early 2008 and again in 2014 due to a supply shortfall. New power stations are being built to increase the capacity of the national power grid. However this is a lengthy process.
Demand Side Management (DSM) was adopted by Eskom’s Integrated Demand Management (IDM) division. DSM is a short-term solution to stabilise the national grid in South Africa by managing the electricity demand on the consumer’s or client’s side. DSM aims to reduce the electricity consumption with immediate results in the short-term.
DSM projects were successfully implemented at nine South African cement factories since 2012. Cement factories are ideal for the implementation of DSM projects for the following reasons: cement factories are energy intensive; have adequate reserve production capacity; sufficient storage capacity and interruptible production schedules.
The aim of this study is to analyse the effect of DSM projects at South African cement factories. A detailed understanding of the cement production process is a prerequisite. Therefore a critical review of energy utilisation in the cement industry was conducted. Previous work done in the cement production field is evaluated to identify the possible literature shortfall on DSM projects.
A set of five distinctive parameters was derived from the literature survey to quantify the possible effects of DSM projects at cement factories. The parameters are demand reduction and electricity cost; production targets; infrastructure; product quality and sustainability. One cement factory, Factory #1, was selected as a primary case study for the analysis model. Factory #1 was used to determine and quantify the effects of DSM projects at cement factories. A simulation was developed to verify the analysis model outcome. DSM projects were implemented at various factories in South Africa and the results from nine sites were used to validate the aim of this study.
The study concluded that most DSM projects at South African cement factories were sustainable. Both the electricity supplier and the factories benefitted from the projects. The funding received from Eskom to implement DSM projects is a short-term initiative. However, sustainability of DSM projects is made possible in the long-term by the substantial electricity cost savings on the client’s or factory’s side. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015
|
7 |
The cost-effectiveness of comprehensive system control on a mine compressed air network / Stephanus Nicolaas van der LindeVan der Linde, Stephanus Nicolaas January 2014 (has links)
Compressed air leakage accounts for up to 42% of electrical energy loss on a typical
mine compressed air system. By using underground control valves it is possible to
reduce the amount of air leakage. Underground valve control was successfully
implemented in a South African mine. The project implementation and achieved
results are documented in this study.
The implementation of underground control valves initially requires a large capital
investment. In this study the electrical and financial savings realised by underground
valve control and surface valve control were calculated. The payback periods for
each control strategy were determined and compared.
It was determined that underground valve control can realise up to 40% higher
electrical savings than surface control. Depending on the size of the mine and due to
the large initial investment, the payback period for an underground valve control
system can be up to six times longer than that of a surface control system. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2014
|
8 |
A performance-centered maintenance strategy for industrial DSM projects / Hendrik Johannes GroenewaldGroenewald, Hendrik Johannes January 2015 (has links)
South Africa’s electricity supply is under pressure because of inadequate capacity expansion in the early 2000s. One of the initiatives funded by Eskom to alleviate the pressure on the national electricity grid was an aggressive demand-side management (DSM) programme that commenced in 2004. A positive outcome of the DSM programme was that the industrial sector in South Africa benefited from the implementation of a relatively large number of DSM projects. These DSM projects reduced the electricity costs of industrial clients and reduced the demand on the national electricity grid.
Unfortunately, the performance of industrial DSM projects deteriorates without proper maintenance. This results in wasted savings opportunities that are costly to industrial clients and Eskom. The purpose of this study was therefore to develop a maintenance strategy that could be applied, firstly, to reverse the deterioration of DSM project performance and, secondly, to sustain and to improve DSM project performance. The focus of the maintenance strategy was to obtain maximum project performance that translated to maximum electricity cost savings for the client.
A new performance-centered maintenance (PCM) strategy was developed and proven through practical experience in maintaining industrial DSM projects over a period of more than 60 months. The first part of the PCM strategy consisted of developing a new strategy for the outsourcing of DSM project maintenance to energy services companies (ESCOs) on the company group level of the client. The strategy served as a guideline for both ESCOs and industrial clients to implement and manage a group-level DSM maintenance agreement successfully.
The second part of the PCM strategy consisted of a simplified method that was developed to identify DSM projects where applying a PCM strategy would increase or sustain electricity cost savings. The third part of the PCM strategy consisted of practical maintenance guidelines that were developed to ensure maximum project performance. It was based on the plan-do-check-act cycle for continuous improvement with an emphasis on the monitoring of DSM project performance. The last part of the PCM strategy consisted of various alternative key performance indicators that should be monitored to ensure maximum sustainable DSM project performance.
The PCM strategy was evaluated by implementing it on ten different DSM projects. The results showed that applying a PCM strategy resulted in an average increase of 64.4% in the electricity cost savings generated by these projects. The average implementation cost of the PCM strategy was 6% of the total benefit generated through it. This indicated that implementing the PCM strategy was a cost-effective manner to ensure that maximum performance of DSM projects was maintained sustainably. / PhD (Computer and Electronic Engineering), North-West University, Potchefstroom Campus, 2015
|
9 |
Analysing electricity cost saving opportunities on South African gold processing plants / Waldt HamerHamer, Waldt January 2014 (has links)
Costs saving measures are important for South African gold producers due to increasing energy costs and decreasing production volumes. Demand Side Management (DSM) is an effective strategy to reduce electricity consumption and costs. DSM projects have been implemented widely on South African mining systems such as pumping, refrigeration, rock transport and compressed air. Implementations have, however, been limited on gold processing plants despite the significant amounts of energy that this section consumes.
The main objective of gold processing plants is production orientated and energy management is not a primary focus. This rationale is re-evaluated owing to high electricity price inflation and availability of DSM incentives. This study investigated the cost saving potential of DSM interventions on gold plants. Electrical load management was identified as a key opportunity that can deliver substantial cost savings. These savings were shown to be feasible in respect of the required capital expenditure, effort of implementation and maintenance of operational targets.
Investigation procedures were compiled to identify feasible load management opportunities. The most potential for electricity cost savings was identified on comminution equipment. Consequently, a methodology was developed to implement electrical load management on the identified sections. The methodology proposed simulation techniques that enabled load management and subsequent electricity cost optimisation through production planning.
Two electrical load management case studies were successfully implemented on comminution equipment at two gold processing plants. Peak period load shift of 3.6 MW and 0.6 MW, respectively, was achieved on average for a period of three months. The annual cost savings of these applications
could amount to R1.4-million and R 660 000. This results in specific electricity cost reductions of 3% and 7% for the two respective case studies.
Results from the two case studies are an indication of potential for electrical load management on South African gold processing plants. If an average electricity cost saving of 5% is extrapolated across the South African gold processing industry, the potential cost savings amount to R 25-million per annum. Although the costs saving opportunities are feasible, it is influenced by the reliability of the equipment and the dynamics of ore supply. This insight plays a decisive role in determining the feasibility of DSM on gold processing plants. / MIng (Mechanical Engineering), North-West University, Potchefstroom Campus, 2015
|
10 |
Challenges faced during implementation of a compressed air energy savings project on a gold mine / Gerhardus Petrus HeynsHeyns, Gerhardus Petrus January 2014 (has links)
MIng (Electrical and Electronic Engineering), North-West University, Potchefstroom Campus, 2015 / Demand side management (DSM) initiatives have been introduced by Eskom to reduce the
deficit between the electricity generation capacity and the electricity usage within the country.
DSM projects enable Eskom to reduce electricity demand instead of increasing generation
capacity. DSM projects are more economical and can be implemented much faster than
constructing a new power station.
One particular industry where DSM projects can be implemented is on mines. Mines consume
about 14.5% of South Africa’s electricity. Producing compressed air, in particular, is one of the
largest electricity users on mines. It consumes 17% of the electricity used on mines. The
opportunity, therefore, arises to implement DSM projects on the compressed air system of mines.
Not only do these projects reduce Eskom’s high electricity demand, but they also induce
financial and energy savings for the mine itself.
However, during the implementation of a compressed air energy savings project, various
challenges arise. These include, among others, operational changes, control limitations, industrial
actions and installation delays. All of these can lead to a project not being delivered on time,
within budget or with quality results.
The purpose of this study is to investigate and address various problems that occur during the
implementation of such a compressed air energy savings project. The study shows that although
these problems have an impact on the results achievable with the project, significant savings are
still possible.
Project savings are achieved by reducing the amount of compressed air that is supplied, thereby
delivering sufficient compressed air while minimising the amount of compressed air being
wasted. During this study, a gold mine’s compressed air network was optimised. The
optimisation resulted in an evening peak-clip saving of 2.61 MW. This saving was achieved
daily between 18:00 and 20:00 when Eskom’s electricity demand was at its highest. It is
equivalent to an annual cost saving of R1.46 million based on Eskom’s 2014/2015 tariffs. When
savings from all periods throughout the day are taken into account, the project will produce an
annual cost saving of R1.91 million.
|
Page generated in 0.0543 seconds