Spelling suggestions: "subject:"diesel vehicles"" "subject:"giesel vehicles""
1 |
<b>Advanced Control Strategies For Heavy Duty Diesel Powertrains</b>Shubham Ashta (18857710) 21 June 2024 (has links)
<p dir="ltr">The automotive industry has incorporated controls since the 1970s, starting with the pioneering application of an air-to-fuel ratio feedback control carburetor. Over time, significant advancements have been made in control strategies to meet industry standards for reduced fuel consumption, exhaust emissions, and enhanced safety. This thesis focuses on the implementation of advanced control strategies in heavy-duty diesel powertrains and their advantages over traditional control methods commonly employed in the automotive industry.</p><p dir="ltr">The initial part of the thesis demonstrates the utilization of model predictive control (MPC) to generate an optimized velocity profile for class 8 trucks. These velocity profiles are designed to minimize fuel consumption along a given route with known grade conditions, while adhering to the time constraints comparable to those of standard commercial cruise controllers. This methodology is further expanded to include the platooning of two trucks, with the rear truck following a desired gap (variable or fixed), resulting in additional fuel savings throughout the designated route. Through collaborative efforts involving Cummins, Peloton Technology, and Purdue University, these control strategies were implemented and validated through simulation, hardware-in-the-loop testing, and ultimately, in demonstration vehicles.</p><p dir="ltr">MPC is highly effective for vehicle-level controls due to the accurate plant model used for optimization. However, when it comes to engine controls, the plant model becomes highly nonlinear and loses accuracy when linearized [20]. To address this issue, robust control techniques are introduced to account for the inherent inaccuracies in the plant model, which can be represented as uncertainties.</p><p dir="ltr">The second study showcases the application of robust controllers in diesel engine operations, focusing on a 4.5L John Deere diesel engine equipped with an electrified intake boosting system. The intake boosting system is selectively activated during transient operations to mitigate drops in the air-to-fuel ratio (AFR), which can result in smoke emissions. Initially, a two-degree-of-freedom robustsingle-input single-output (SISO) eBooster controller is synthesized to control the eBooster during load transients. Although the robust SISO controller yields improvements, the eBooster alone does not encompass all factors affecting the gas exchange process. Other actuators, such as the exhaust throttle and EGR valve, need to be considered to enhance the air handling system. To achieve this, a robust model-basedmultiple-input multiple-output (MIMO) controller is developed to regulate the desired AFR, engine speed, and diluent air ratio (DAR) using various air handling actuators and fueling strategies. The robust MIMO controller is synthesized based on a physics-based mean value engine model, which has been calibrated to accurately reflect high-fidelity engine simulation software. The robust SISO and MIMO controllers are implemented in simulation using the high-fidelity engine simulation software. Following the simulation, the controllers are validated through experimental testing conducted in an engine dynamometer at University of Wisconsin. Results from these controllers are compared against a non-eBoosted engine, which serves as the baseline. While both the SISO and MIMO controllers show improvements in AFR (Air-Fuel Ratio), DAR (Diluent Air Ratio), and engine speed recovery during the load transients, the robust MIMO controller outperforms them by demonstrating the best overall engine performance. This superiority is attributed to its comprehensive understanding of the coupling between each actuator input and the model output. When the MIMO controller operates alongside the electrified intake boosting system, the engine exhibits remarkable enhancements. Not only does it recover back to a steady state 70% faster than the baseline, but it also reduces engine speed droop by 45%. Consequently, the engine's ability to accept load torque increases significantly.</p><p dir="ltr">As a result, a single robust MIMO controller can efficiently perform the same task instead of employing multiple PIDs or look-up tables for each actuator.</p>
|
2 |
Roles of morphology and foreign metals of ceria-based catalysts in improving oxidations of Diesel vehicle pollutants / rôles de la morphologie et du dopage des catalyseurs à base de cérine dans l'oxydation des polluants émis par les véhicules dieselAndana, Tahrizi 04 April 2017 (has links)
Le travail au présent surligne la cérine nanostructurée et bien-définie ; une morphologie qui promeut une haute activité catalytique de la cérine dans l’oxydation des suies. Le travail présente également l’introduction des métaux pour le dopage, tels que praséodyme et zirconium, à la surface de la cérine pour améliorer la réductibilité, la stabilité thermique, et la capacité du stockage d’oxygène. L’oxydation à température programmée a été utilisée pour analyser l’activité catalytique. Au premier étage de la recherche, on a découvert que l’oxyde en mélange équimolaire de la cérine et de l’oxyde de praséodyme en nanostructure (indiqué comme Ce50Pr50-NP) possède la quantité d’espèces oxygénées à la surface la plus haute, la réductibilité la plus haute et l’activité catalytique la plus haute dans l’oxydation normale des suies. Il a été conclu que la nanostructure soulève la fonctionnalité du praséodyme dans la cérine. Le travail introduit également des nanoparticules (NPs) de Pt stabilisée par n-octylsilane. Pendant la calcination, les ligands silyliques se transforment aux « patches » de la silice qui leur évitent le frittage. Des NPs de Cu ont été préparées avec la même façon ; néanmoins elles ont souffert de sintering. Les NPs de Pt sont très actives dans l’oxydation de tous les polluants modèles des véhicules Diesel, spécifiquement l’oxydation des suies en présence de NOx, et elles fonctionnent mieux avec la cérine nanostructurée. Comme attendu, Ce50Pr50-NP donne l’activité catalytique plus haute que les catalyseurs à base du platine. La haute conversion du NO et l’adsorption du NO2 sur la surface sont la raison majeure de l’activité marquante / The present work highlights well-defined nanostructured ceria; a morphology that bestows exceptional catalytic activity on ceria towards soot oxidation. The work includes also introduction of promoting foreign metals, such as praseodymium and zirconium, to well-defined nanostructured ceria as a means of improving reducibility, thermal stability and oxygen storage capacity of the catalyst. Temperature-programmed oxidation (TPO) has been used for analyzing catalytic activity. At the first stage of the research, nanostructured equimolar ceria-praseodymia (denoted as Ce50Pr50-NP) was found to have the highest amount of surface oxygen, the highest reducibility and the highest catalytic activity towards soot oxidation. The nanostructured morphology has been proven to raise the functionality of praseodymia as the foreign metal in ceria. The work also introduces small, silane-stabilized Pt nanoparticles. Upon calcination, silyl ligands are transformed into siliceous patches that prevent the particle from migrating/coalescing. Cu nanoparticles have been prepared the same way as Pt nanoparticles; however, they sinter even under milder thermal treatment. The small Pt-NPs are proven active towards all pollutant oxidations, including NOx-assisted soot oxidation, and they function better with nanostructured ceria as the support. Unexpectedly, Ce50Pr50-NP gives higher activity towards NOx-assisted soot oxidation than Pt catalysts. Intense NO conversion and NO2 adsorption on the surface of Ce50Pr50-NP are the reason behind its high activity
|
Page generated in 0.0586 seconds