Spelling suggestions: "subject:"diffusers dynamics"" "subject:"diffuserait dynamics""
1 |
Using a single-well push-pull test to estimate mass transfer rate parametersKelley, Michael John 22 January 1999 (has links)
More efficient methods are needed for the in-situ evaluation of mass transfer
parameters which describe the movement of solutes through aquifer material. The
objective of this study was to develop a method for estimating diffusion rate and
capacity coefficients using a single-well, "push-pull" tracer test. The method consists
of the pulse-type injection of a test solution into the saturated zone of an aquifer
through the screen of an existing monitoring well. This is followed by a resting
(diffusion) period, after which the test solution is extracted from the same well.
During the extraction phase a concentration breakthrough curve is obtained. The
method uses numerical simulations of the extraction phase breakthrough curve to
estimate mass transfer parameters. The methodology was evaluated using a series of
laboratory-scale experiments which were performed in a Physical Aquifer Model
(PAM). The sediment pack contained in the PAM was modified to create an
immobile region governed by diffusive processes.
Results from four laboratory-scale experiments are inconclusive in determining the ability of the method to determine mass transfer parameters. Experimental difficulties contributed a significant source of error during the method evaluation. The resting period between the injection and extraction phase was to allow diffusion into the initially solute-free immobile region. Evidence suggests solute was introduced into the immobile region by advective processes during the injection phase of the experiments. Additional experimental work is required to evaluate the methodology. This may include either laboratory or field-scale evaluation of the test method. / Graduation date: 1999
|
2 |
Winter cover cropping effects on integrative biological indicators of soil qualityNdiaye, Evelyne L. 15 December 1998 (has links)
Responses of biological indicators of soil quality to winter cover cropping were
measured on soil samples collected from 6 commercial growers' fields and two
experiment research stations in the Willamette Valley of Oregon. The research stations
were the North Willamette Research and Extension Center (Aurora, OR), and the
Oregon State University Vegetable Farm (Corvallis, OR). The research stations and
five on-farm sites compared winter cover crops or winter fallow in rotation with a
summer vegetable crop. In one on-farm site, minimum tillage or conventional till
following winter cover crops was compared. The objectives of this study were to:
1) monitor changes in soil biological properties under field managed with cover crops;
2) test potential of buried cotton strip as indicator of soil biological activity and as a soil
quality index; and 3) assess the degree of correlation between tensile strength and
cotton strip weight loss. The major findings were: 1) microbial biomass carbon and
��-glucosidase activity were the most sensitive to cover crop management; 2) cotton strip
decomposition was correlated to soil biological properties but was not very sensitive to
management changes; and 3) that measuring weight loss was nearly as effective as
tensile strength in assessing cotton strip decomposition in soils. / Graduation date: 1999
|
3 |
Emission characteristics of a liquid spray sudden expansion combustor using computational fluid dynamicsUnknown Date (has links)
A sudden expansion combustor (SUE) is analyzed using computation fluid dynamics (CFD). CO emissions and NOx emissions are computed for various operating conditions of the SUE combustor using a can type and an annular type geometrical configurations. The goal of this thesis is to see if the SUE combustor is a viable alternative to conventional combustors which utilize swirlers. It is found that for the can type combustor the NOx emissions were quite low compared to other combustor types but the CO emissions were fairly high. The annular combustor shows better CO emissions compared to the can type, but the CO emissions are still high compared to other combustors. Emissions can be improved by providing better mixing in the primary combustion zone. The SUE combustor design needs to be further refined in order for it to be a viable alternative to conventional combustors with swirlers. / by Daniel Rodriguez. / Thesis (M.S.C.S.)--Florida Atlantic University, 2013. / Includes bibliography. / Mode of access: World Wide Web. / System requirements: Adobe Reader.
|
Page generated in 0.0546 seconds