Spelling suggestions: "subject:"dimming operation"" "subject:"aimming operation""
1 |
Life-End Detection and Protection of High-Frequency Electronic Ballast Driven Fluorescent LampsLee, Cheng-Chung 19 August 2004 (has links)
The fault phenomena of fluorescent lamps are investigated by observing the operations in the last period of the life cycle. Accordingly, fault detecting and protection circuits are designed.
Before coming to the life-end, the lamps can be started up, but are operated abnormally. A ruddy glow may occur at one end of the cathode filaments and an unstable arc may happen to the lamp. Obviously, the light efficiency becomes relatively low. The arc instability eventually results in a totally damaged fluorescent lamp. It is found that both waveforms of the lamp voltage and the lamp current are asymmetrical and have unequal positive and negative peak values. The asymmetry is more significant for the lamp voltage. In addition, a dc component is present in the lamp voltage. Based on these investigated results, the detection and protection circuits are designed for high-frequency electronic ballasts under dimming operations as well at the rated power. The experiments show that the detection and protection circuits can work effectively.
|
2 |
A Single-Stage High-Power-Factor Dimmable Electronic Ballast with Asymmetrical Pulse-Width-Modulation for Fluorescent LampsYang, Dong-Yi 21 June 2000 (has links)
A single-stage high-power-factor electronic ballast is designed for fluorescent lamps with dimming capability. The circuit configuration is originated from the integration of the half-bridge resonant inverter and the buck-boost converter. The buck-boost converter is designed to operate in discontinuous conduction mode (DCM) to provide nearly unit power factor at a fixed switching frequency. With asymmetrical pulse-width-modulation (APWM), the lamp power can be effectively regulated. The power switches of the inverter exhibit either zero-voltage-switching (ZVS) or zero-current-switching (ZCS) over the whole dimming range. Design equations are derived and computer analyses are performed based on a power-dependent lamp model and fundamental approximation. Design guidelines for determining circuit parameters are provided. A prototype circuit for a T8-36W fluorescent lamp is built and tested to verify the analytical predictions.
|
Page generated in 0.1267 seconds