Spelling suggestions: "subject:"dissertations -- astrochemistry"" "subject:"dissertations -- semiochemistry""
1 |
Ruthenium(III) aqua-chloro complex chemistry : the interconversion of the hexachlororuthenate(III) and aquapentachlororuthenate(III) speciesViljoen, Karen 12 1900 (has links)
Thesis (MSc)--University of Stellenbosch, 2003. / ENGLISH ABSTRACT: Ruthenium, as one of the platinum group metals, was investigated to
determine the aquation rate constant of [RuCl6]3- and the anation rate
constant of [RuCl5(H2O)]2-. This two reactions represent the
equilibrium reaction [RuCl6]3- + H2O ⇄ [RuCl5(H2O)]2- + Cl-. The
reactions were followed, using stopped-flow injection and UV/Visible
spectroscopy, at different temperatures. The aquation and anation
rate constants were determined with good precision and
thermodynamic values for the reactions were calculated.
The pseudo first order aquation rate constant, k65, was determined by
calculation from the regression line as k65 = 52.1 (±3.7) x10-3 s-1 at
25°C. The activation energy, Ea, is 90.1 (±1.2) kJ.mol-1 and the
enthalpy and entropy of activation is 87.7 (±1.2) kJ.mol-1 and 24.7
(±4.3) J.K-1.mol-1, respectively. The aquation rate constant was
found to be dependent on the hydrochloric acid concentration,
decreasing with increasing hydrochloric acid concentration.
From the regression line at 25°C the second order anation rate
constant, k56, was calculated as 1.62 (±0.11) x10-3 M-1s-1. The
activation energy is 88.0 (±1.4) kJ.mol-1, with the enthalpy and entropy
of activation 85.6 (±1.4) kJ.mol-1 and –11.2 (±4.7) J.K-1.mol-1,
respectively. The influence of the hydrochloric acid concentration of
the solution on the anation rate constant was not investigated.
The equilibrium constant for the reaction studied was calculated from
the rate constants for the aquation and anation reactions. The
equilibrium constant, K6, was calculated as 0.0311 M-1 at 25°C. The
equilibrium constant, when compared to literature, was found to be
dependent on the hydrochloric acid concentration. It was then used, in
conjunction with data from the literature, to construct two distribution
diagrams. Distribution diagrams for the Ru(III) aquachloro species show between 79.9% to 72.3% [RuCl6]3- present in 12M HCl. The two
distribution diagrams were very similar and it is not possible to resolve
the issue of a final distribution diagram for the aqua-chloro Ru(III)
system without further investigation into the all the other rate constants
of the Ru(III) aqua-chloro species.
The rate constants and thermodynamic values for the Ru(III) reaction
were compared to corresponding data (from literature) for Rh(III) and
Ir(III) because several comparisons between these platinum group
metals have been noted. It was found that for both the aquation and
anation rate constants, the following trend was observed: Ru(III) >
Rh(III) > Ir(III). These differences are in certain cases exploited in the
refining of these platinum group metals.
Crystals of diethylenetriamine hexachlororuthenate(III) was prepared
and characterised by x-ray crystallography and CHN analysis. The
average Cl-Ru bond length for the crystal was 2.371 Å. The crystal
structure was compared to hexaaquaaluminium
hexachlororuthenate(III) tetrahydrate and diethylenetriamine
hexachlororhodate(III). The metal-chloride bond lengths of all the
crystals were found to be similar (2.350 Å – 2.375 Å). The
diethylenetriamine crystal structures compared well. The conclusion
was that the crystals prepared were diethylenetriamine
hexachlororuthenate(III). / AFRIKAANSE OPSOMMING: Ruthenium(III), een van die platinum groep metaal-ione, is in hierdie
studie ondersoek om die akwasie tempo konstante van [RuCl6]3- en die
anasie tempo konstante van [RuCl5(H2O)]2- te bepaal. Dié twee
reaksies verteenwoordig die ewewigsreaksie [RuCl6]3- + H2O ⇄
[RuCl5(H2O)]2- + Cl-. Die verloop van die reaksies is met behulp van
UV/Sigbare spektroskopie by verskillende temperature gevolg. Die
akwasie en anasie tempo konstantes is bepaal met goeie presisie en
die termodinamiese konstantes van die reaksies is bereken.
Die pseudo-eerste orde akwasie tempo konstante, k65, is bepaal deur
middel van regressie, as 52.1 (±3.7) x10-3 s-1 by 25°C. Die aktiverings
energie, Ea, is bereken as 90.1 (±1.2) kJ.mol-1 en die entalpie en
entropie van aktivering is onderskeidelik 87.7 (±1.2) kJ.mol-1 en 24.7
(±4.3) J.K-1.mol-1. Daar is gevind dat die akwasie reaksie konstante
afhanklik was van die soutsuur konsentrasie: dit neem af soos die
soutsuur konsentrasie toeneem.
Met behulp van die regressie lyn is die anasie tempo konstante bepaal
by 25°C as 1.62 (±0.11) x10-3 M-1s-1. Die aktiveringsenergie is bepaal
as 88.0 (±1.4) kJ.mol-1 en die entalpie en entropie van aktivering,
onderskeidelik as 85.6 (±1.4) kJ.mol-1 en –11.2 (±4.7) J.K-1.mol-1. Die
invloed van die soutsuur konsentrasie op die anasie tempo konstante is
nie bepaal nie.
Die ewewigskonstante vir die reaksie wat ondersoek is, is bereken met
die tempo konstantes vir die akwasie en anasie reaksies. Die
ewewigskonstante, K6, is bereken as 0.0311 M-1 by 25°C. Toe die
ewewigskonstante vergelyk is met die literatuur waardes, is gevind dat
die ewewigskonstante afhanklik is van die soutsuur konsentrasie.
Saam met die waardes wat in die literatuur gevind is, is die
ewewigskonstante gebruik om twee distribusie diagramme te bereken. Die distribusie diagramme vir die Ru(III) spesies toon onderskeidelik
79.9% en 72.3% [RuCl6]3- in 12M HCl. Die twee distribusie diagramme
is baie eenders en dit is nie moontlik om ‘n finale distribusie diagram op
te trek totdat die uitstaande tempo konstantes tussen die akwachloro
Ru(III) spesies bepaal word nie.
Die tempo konstantes en termodinamiese waardes wat bepaal is vir die
Ru(III) reaksie is vergelyk met gelyksoortige waardes in die literatuur
van Rh(III) en Ir(III) omdat daar ooreenkomste tussen die platinum
groep metale opgemerk is. Daar is bevind dat die akwasie én anasie
reaksies die volgende patroon volg: Ru(III) > Rh(III) > Ir(III). Die
verskille word in sekere gevalle benut in die raffinering van hierdie
metale.
Kristalle van dietileentriamien heksachlororuthenaat(III) is berei en
gekarakteriseer met behulp van CHN analise en x-straal kristallografie.
Die gemiddelde Cl-Ru bindingsafstand vir die kristal was 2.371 Å. Die
kristalstruktuur is vergelyk met dié van heksaäkwaäluminium
hexachlororuthenaat(III) tetrahidraat en diëtileentriamien
heksachlororhodaat(III). Die chloried-metaal bindingsafstand vir die
kristalle was soortgelyk (2.350 Å – 2.375 Å). Die diëtileentriamien
kristalstrukture stem goed ooreen. Die gevolgtrekking was dat die
kristalle wat voorberei is wel diëtileentriamien heksachlororuthenaat(III)
was.
|
2 |
The production of 139Pr and 139Ce in proton-induced reactionsVermeulen, Christiaan 12 1900 (has links)
Thesis (MSc (Chemistry and Polymer Science))--University of Stellenbosch, 2007. / Excitation functions and production rates are presented for various Ce and Pr radionuclides
formed in the bombardment of 141Pr, natLa and natCe with protons. Extensive measure-
ments were performed for 141Pr + p up to 100 MeV and for natLa + p up to 20 MeV. The
possibility is investigated to utilize tandem targetry for the production of no-carrier-added
139Ce of high radionuclidic purity, having a Pr target in the higher energy slot followed
by a La target in a lower energy slot. 141Pr(p,3n)139mNd!139Pr is investigated as an al-
ternative to the direct production route 140Ce(p,2n)139Pr for producing no-carrier-added
139Pr of high radionuclidic purity. The advantages and disadvantages of both production
routes are discussed. The simultaneous production of 139Pr and 140Nd using Pr as target
is also investigated. Experimental thick-target production rates are presented for Pr ra-
dionuclides formed in the bombardment of natCe with protons at incident energies of 20, 26
and 32 MeV. All the experimental excitation functions obtained in this work are compared
with theoretical predictions by means of the geometry-dependent hybrid (GDH) model as
implemented in the code ALICE-IPPE. The results of this work are also compared with
previous literature experimental data, if available.
|
3 |
Preparation of new rhodium and cobalt complexes as catalysts for hydroformylation studiesNeveling, Arno 12 1900 (has links)
Thesis (PhD)--Stellenbosch University, 2003. / ENGLISH ABSTRACT: Please refer to full text for abstract / AFRIKAANSE OPSOMMING: Sien asb volteks vir opsomming
|
4 |
Synthesis and radiochemical stability evaluation of radiopharmaceutical compounds containing radioiodinated prosthetic groupsRossouw, Daniel Du Toit 12 1900 (has links)
Thesis (PhD)--Stellenbosch University, 2004. / ENGLISH ABSTRACT: A study was undertaken to investigate the radiochemical stability of the βiodoethoxyl moiety,
a relatively novel prosthetic group employed in radiopharmaceutical chemistry, in which an
oxygen atom in a β-position relative to the radioiodine atom has a stabilising effect on the
aliphatic carbon-iodine bond. The investigation was started as a pilot study by synthesising
various model compounds containing a β-radioiodoethoxyl moiety, as well as two reference
compounds lacking such a moiety. The purpose was to determine the influence of various
groups in the vicinity of the β-oxygen atom on the stability of the abovementioned moiety.
Radiochemical stability tests were carried out in vitro at 37°C in human blood serum. The
results confirmed the superior stability of such a moiety compared to that of the reference
compounds and also showed that the branching of such an aliphatic unit resulted in a
considerable improvement in its stability, especially over a longer period.
The investigation was extended to the synthesis of other compounds containing a few selected
β-iodoethoxyl moieties that showed improved stability in the pilot study work. Reference
compounds containing the classical iodovinyl unit, as well as those lacking a stabilising β-
oxygen atom, were also prepared. The carrier molecules used in this part of the work was a
benzamide containing a phenolic oxygen atom which acted as the β-oxygen atom, as well as
two heterocyclic amines, benzotriazole and 2-methyl-5-nitroimidazole, in which the β-
iodoethoxyl moiety was linked to a secondary nitrogen atom. Various suitable alkylating agents
were prepared, chemically linked to the carrier molecules, the resulting intermediate
compounds converted into tosylate or triflate iodination precursors and labelled with
radioiodine by means of iodide-for-tosylate/triflate exchange. In vitro stability tests of these
compounds showed similar trends to those obtained with the model compounds. Moreover, the
stability of the stabilised β-iodoethoxyl moiety compared favourably with that of the iodovinyl
unit, especially when incorporated into a heterocyclic amine. The results of this study have shown that some of the radioiodinated compounds synthesized in this work, especially the
nitroimidazole derivatives, have the potential to be considered as novel radiopharmaceuticals. / AFRIKAANSE OPSOMMING: 'n Studie is onderneem om die radiochemiese stabiliteit van die β-jodium-etoksi-eenheid te
ondersoek. Dié eenheid is 'n relatief nuwe prostetiese groep wat in radiofarmaseutiese chemie
gebruik word. Die suurstofatoom wat in 'n β-posisie relatief tot die radiojodiumatoom
voorkom, oefen 'n stabiliserende invloed op die alifatiese koolstof-jodiumbinding uit. Die
ondersoek het met 'n loodsstudie begin deur verskillende modelverbindings te sintetiseer wat 'n
β-radiojodium-etoksi-eenheid bevat, asook twee verwysingsverbindings waarin so 'n eenheid
ontbreek. Die doel hiermee was om die invloed van verskillende groepe, wat in die omgewing
van die β-suurstofatoom voorkom, op die stabiliteit van die eenheid te bepaal. Radiochemiese
stabiliteitstoetse is uitgevoer deur middel van inkubering in menslike bloedserum by 37°C. Die
resultate het die groter stabiliteit van so 'n eenheid in vergelyking met dié van die
verwysingsverbindings aangetoon, en het ook uitgewys dat vertakking van so 'n alifatiese
eenheid 'n aansienlike verbetering in die stabiliteit tot gevolg gehad het, veraloor 'n langer
periode.
Die ondersoek is vervolgens uitgebrei deur verdere verbindings te sintetiseer wat beskik oor
bepaalde uitgesoekte β-jodium-etoksi-eenhede, wat verbeterde stabiliteit in die loodsstudie
getoon het. Verwysingsverbindings wat die klassieke jodiumvinieleenheid bevat het, sowel as
dié waarin 'n stabiliserende β-suurstofatoom ontbreek het, is ook berei. Die draermolekules
wat in hierdie deel van die studie gebruik is, was 'n bensamied met 'n fenoliese suurstofatoom
wat as die β-suurstofatoom gedien het, sowel as twee heterosikliese amiene, bensotriasool en 2-
metiel-5-nitroimidasool, waarin die β-jodium-etoksi-eenheid aan 'n sekondêre stikstofatoom
geheg is. Verskillende geskikte alkileermiddels is berei, aan die draermolekules geheg, die
tussenprodukte omskep in tosilate of triflate en met radiojodium gemerk deur middel van
jodium-vir-tosilaatltriflaat-uitruiling. Stabiliteitstoetse van hierdie verbindings in bloedserum
het soortgelyke tendense as dié van die aanvanklike modelverbindings getoon. Daarbenewens
het die stabiliteit van die gestabiliseerde β-jodium-etoksi-eenheid gunstig vergelyk met dié van die jodiumviniel-eenheid, veral wanneer dit deel gevorm het van 'n heterosikliese amien. Die
resultate van die studie het getoon dat sommige van die radiogejodeerde verbindings wat berei
is, veral die nitroimidasoolderivate, die potensiaal het om as nuwe radiofarmaseutiese
verbindings gebruik te kan word.
|
5 |
Ontwikkeling van instrumentasie vir omvattende tweedimensionele gaschromatografieSnyman, Tertia 12 1900 (has links)
Thesis (PhD)--Stellenbosch University, 2001. / ENGLISH ABSTRACT: Even capillary gas chromatography does not always give complete separation of the
components of complex mixtures. During the last few decades several two-dimensional
gas chromatographic techniques were developed to circumvent this problem and towards
the end of the previous century, a technique that became known as comprehensive twodimensional
gas chromatography, was introduced with which the peak capacity of
capillary gas chromatography could be increased by at least two orders of magnitude.
This technique is based on utilizing different separation mechanisms of two coupled
chromatographic columns to get a better separation of complex mixtures than would be
possible with the individual columns. To be classified as comprehensive twodimensional
gas chromatography, the analytes eluted from the first or primary column
must al be transferred to the second column as sharp sample pulses by, for example,
focusing of analytes. Focusing of the analytes can be achieved by trapping or
immobilizing the analytes in a short capillary tube that serves as a connection between
the two columns, after which the trapped material is released as a sharp pulse into the
secondary column by rapidly, i.e. within a fraction of a second, heating this capillary
which therefore serves to modulate the effluent from the primary column. This ensures
optimum separation on the secondary column and the independence of retention times of
the analytes on the two columns.
A modulator consisting of a capillary (modulator capillary) coated with a thick film of an
apolar stationary phase was used in the present project to immobilize or trap the analytes.
This capillary was housed in a stainless-steel tube (heater) which was subdivided into a
number of segments of equal lengths (maximum of 10). These segments were heated
sequentially to desorb the analytes from the inlet end of the modulator to its outlet end at
such a rate as to generate and transfer a sharply focused analyte pulse into the secondary
column. In a typical analysis each of the 10 segments of a lO-segment heater would, for
example, be heated to a temperature 50°C higher than that of the gas chromatograph's
oven (50°C temperature increment) within 200 milliseconds, after which each segment
would be allowed to immediately cool down to the temperature of the oven. After the last segment had been heated, a pause of, for example, two seconds followed to allow
analytes to be trapped in the modulator capillary after which the cycle was repeated until
the analysis had been completed.
For several reasons, heating the segments resistively by using a current of between 1 and
20 Ampere was preferred to the application of high voltages. A computer controlled
power supply was developed with which any combination of duration of the energizing
pulses of the segments from 10 to 2500 milliseconds, pause times from 100 milliseconds
to 100 seconds and temperature increments of 100°C or higher could be used with
acceptable precision and high reproducibility in comprehensive two-dimensional gas
chromatographic analyses.
The effectivity of the focusing that can be achieved with heaters having different
numbers of segments, modulator capillaries with different inside diameters, different
heating increments, as well as different rates at which the modulators are heated, were
investigated. The best results were obtained with heaters having 8 and 10 segments, a
modulator capillary with an inside diameter of 0.2 mm, a heating increment between
50°C and 10Goe, and a heating cycle composed of a total heating time of two seconds
followed by a pause time of two to three seconds before the next cycle is started.
A light petroleum oil fraction was used in a preliminary evaluation of the comprehensive
two-dimensional system that was developed. At this stage of the project the influence of
various parameters such as the average carrier gas velocity, the temperature program and
the length of the secondary column was investigated. It was found that changing one
parameter required the re-optimization of the other parameters. The concentrations of the
sample also had a marked influence on the parameters that had to be used to achieve
optimum results. A low sample concentration appeared to require a higher carrier gas
velocity, a higher temperature-programming rate or considerably longer pause times to
achieve satisfactory focusing of analytes, whereas too high a concentration resulted in
breakthrough of the analytes from the modulator capillary. The two-dimensional gas chromatographic device was also interfaced to a quadrupole
mass spectrometer. A GC-MS analysis of a petroleum oil sample gave mass spectra of
surprisingly good quality in spite of the high scanning speed that was required by the
sharp constituent peaks produced by the gas chromatographic component of the system.
The two-dimensional system that was developed therefore appears to offer a costeffective
alternative to other systems that have been developed elsewhere in which other
modulation mechanisms are used.
One remaining problem that still has to be solved is the unsatisfactory synchronization of
the timing device of the power supply with that of the computer on which data are
accumulated. Although the difference in timing may seem negligible, the result is that
certain software packages cannot be used for the two-dimensional visualization of the
data Of several possible solutions to the problem, redesigning the control circuitry of the
power supply will be the first option to be explored.
An important consideration in the development of the system was to avoid having
moving parts so that the modulator could be installed in any gas chromatograph without
requiring structural alterations to the instrument. No provision was therefore made to
install the two columns and the modulator in separate temperature-programmable
compartments in the oven of the gas chromatograph. During the evaluation of the present
system it was, however, found that the parameters which gave acceptable results were
confined to rather narrow limits. Not being able to cool the modulator to temperatures
below that of the oven was found to be the most important limiting factor. A simple
solution to this problem is to cool the modulator to a selected suitable temperature below
the oven temperature with compressed air, the flow of which is regulated by a computer
controlled mass flow regulator to maintain the same increment below the oven
temperature right through an analysis. As this development was considered to be outside
the scope of the present project, this idea was not implemented and evaluated. However,
successful exploratory experiments were done in which the flow was mechanically
regulated. A prototype of the component in which the modulator can be cooled was built
and the mass flow regulator, control unit and software will be commissioned shortly. / AFRIKAANSE OPSOMMING: Volledige skeiding van die verbindings in 'n komplekse mengsel is selfs met kapillêre
gaschromatografie nie altyd moontlik nie. Oor die afgelope paar dekades is verskillende
tweedimensionele gaschromatografiese tegnieke ontwikkel om hierdie probleem te bowe
te kom en redelik onlangs is 'n tegniek bekend gestel wat as omvattende
tweedimensionele gaschromatografie bekend staan en wat die piekkapasiteit van 'n
kapillêre gaschromatografiese skeiding teoreties met sowat twee ordegroottes kan
verhoog. Hierdie tegniek berus op die aanwending van die verskillende
skeidingsmeganismes van twee chromatografiese kolomme wat aan mekaar gekoppel
word en waardeur verbeterde skeiding van komplekse mengsels verkry kan word.
Hierdie tegniek kan egter slegs as omvattende tweedimensionele gaschromatografie
beskou word as die analiete wat van die primêre kolom elueer volledig na die sekondêre
kolom oorgedra word in die vorm van skerp gedefinieerde monsterpulse, byvoorbeeld
deur fokussering van analiete. Fokussering van die analiete kan verkry word deur die
eluaat van die primêre kolom te immobiliseer in 'n kort kapillêr tussen die twee kolomme
waarna dit as 'n skerp puls op die sekondêre kolom ingelaat kan word deur die kapillêr,
wat dus as modulator dien, vinnig, dit wil sê binne breuke van 'n sekonde, te verhit.
Hierdeur word optimum skeiding in die sekondêre kolom verseker asook die
onafhanklikheid van die retensietye van verbindings op die twee kolomme.
In hierdie projek is gebruik gemaak van 'n modulator wat bestaan uit 'n kapillêr
(modulatorkapillêr) belaag met 'n dik laag van 'n apolêre stasionêre fase om die analiete
te immobiliseer. Die kapillêr is in 'n vlekvrye staalbuis (verhitter) geplaas wat in 'n aantal
gelyke segmente verdeel is (maksimum van 10) en die segmente is vinnig opeenvolgend
verhit om die analiete vanaf die inlaat- na die uitlaatkant van die modulator uit die
stasionêre fase in die kapillêr te desorbeer en as 'n skerp gefokusseerde puls na die
sekondêre kolom oor te dra In 'n tipiese analise sou elkeen van die segmente van 'n 10-
segment verhitter, byvoorbeeld, binne 200 millisekondes tot 'n temperatuur 500e hoër as
die temperatuur van die gaschromatograafoond (500e verhittingsinkrement) verhit word,
waarna die betrokke segment toegelaat word om oombliklik tot die oondtemperatuur af te koel. Na verhitting van die laaste segment volg 'n wagtyd van, byvoorbeeld, twee
sekondes om analiete wat uit die primêre kolom elueer toe te laat om in die
modulatorkapillêr gesorbeer te word waarna die siklus herhaal word tot die einde van die
analise.
Om verskeie redes is besluit om die segmente elektries te verhit deur verkieslik hoë
stroomsterktes van tussen 1 en 20 Ampere te gebruik in plaas daarvan om van hoë
spannings gebruik te maak. 'n Gerekenariseerde kragbron is ontwikkel wat dit moontlik
gemaak het om enige kombinasie van verhittingstyd per segment tussen 10 en 2500
millisekondes, wagtye van 100 millisekondes tot 100 sekondes tussen verhittings en
temperatuurinkremente van 100°C en selfs hoër met bevredigende presisie en hoë
reproduseerbaarheid vir omvattende tweedimensionele gaschromatografiese skeidings te
gebruik.
Ondersoek is ingestel na die effektiwiteit van fokussering wat verkry word deur verhitters
met verskillende getalle segmente, modulatorkapillêre met verskillende binnedeursnitte,
verskillende verhittingsinkremente, asook verskillende tempo's waarteen die
modulatorkapillêr verhit word, te gebruik. Die beste resultate is verkry met 8- en 10-
segment verhitters, 'n modulatorkapillêr met 0.2 mm binnedeursnit, 'n verhittingsinkrement
tussen 50°C en 100°C en 'n verhittingsiklus bestaande uit 'n twee sekonde
totale verhittingstyd gevolg deur twee tot drie sekondes wagtyd voor die volgende siklus
begin.
'n Ligte aardolie-fraksie is gekies as die eerste monster vir die evaluering van die
omvattende tweedimensionele sisteem wat ontwikkel is. In hierdie stadium van die
projek is die invloed van verskillende parameters soos die gemiddelde vloeisnelheid van
die draergas, die temperatuurprogram, asook die lengte van die sekondêre kolom
ondersoek. Daar is gevind dat verandering van een parameter, byvoorbeeld die lengte
van die sekondêre kolom, die heroptimering van die ander parameters vereis. Die
konsentrasie van die monster het ook 'n bepalende invloed op die parameters wat 'n
optimum skeiding van verbindings lewer. 'n Lae konsentrasie mag 'n hoër vloei, vinniger temperatuurprogram of heelwat langer wagtyd vereis om bevredigende fokussering van
die analiete te verkry, terwyl 'n te hoë konsentrasie tot deurbraak van die analiete in die
modulatorkapillêr kan lei.
Die tweedimensionele gaschromatografiese sisteem IS ook aan 'n kwadrupoolmassaspektrometer
gekoppel en analise van 'n aardolie-monster het massaspektra van
verbasende goeie kwaliteit gelewer ten spyte van die hoë skandeerspoed wat deur die
baie smal gaschromatografiese pieke wat deur die sisteem geproduseer word, vereis
word. Die tweedimensionele sisteem wat ontwikkel is, stel klaarblyklik 'n kosteeffektiewe
alternatief daar vir die enkele ander sisteme wat deur ander navorsingsgroepe
ontwikkel is en waarin van ander modulatortipes gebruik gemaak word.
Een oorblywende probleem is egter die onbevredigende sinchronisasie van die tydhousisteme
van die kragbron en die rekenaar waarmee die data versamel word. Hoewel
uiters gering, bring die verskil in tydsmeting van die twee komponente mee dat sekere
sagtewarepakette nie vir die tweedimensionele voorstelling van die data gebruik kan
word nie. Vanverskillende moontlike oplossings vir hierdie probleem, sal die
herontwerp van die beheerstelsel van die kragbron eerste ondersoek word.
'n Belangrike oorweging ill die ontwikkeling van die huidige sisteem was om 'n
modulator sonder bewegende dele te ontwikkel wat sonder moeite in enige
gaschromatograaf geïnstalleer sou kon word. Daar is dus nie voorsiening gemaak vir die
installering van die twee kapillêre kolomme en die modulator in afsonderlik
temperatuurprogrammeerbare kompartemente in die gaschromatograafoond rue.
Gedurende die ondersoek het dit egter geblyk dat die parameters wat bevredigende
resultate lewer, as gevolg van hierdie ontwerpskriterium, tussen redelike nou grense lê.
Die mees beperkende faktor is die feit dat die modulator nie benede die oondtemperatuur
afgekoel kan word nie. 'n Eenvoudige oplossing vir hierdie probleem is afkoeling van dié
modulator tot 'n geskikte selekteerbare temperatuur benede dié van die
gaschromatograafoond met druklug waarvan die vloei met behulp van 'n
rekenaarbeheerde klep geprogrammeer kan word. Aangesien hierdie ontwikkeling buite die bestek van die huidige ondersoek geval het, is die idee nie geïmplementeer en
volledig geëvalueer nie. Voorlopige eksperimente waarin die lugvloei meganies beheer
is, is wel suksesvol uitgevoer. 'n Prototipe van 'n geskikte onderdeel waarin die
modulator afgekoel word, is vervaardig en die massavloeiregulerende klep, beheereenheid
en sagteware sal eersdaags in gebruik geneem word.
|
6 |
Selective separation of elements and radioisotopes by ion exchange chromatographyNaidoo, Clive 12 1900 (has links)
Thesis (PhD)--Stellenbosch University, 2002. / ENGLISH ABSTRACT: The equilibrium distribution coefficients of 32 metal ions [Al(llI), As(V), CdïIl),
Ce(III), Ce(IV), Co(n), Cr(III), Cu(II), Fe(III), Ga(III), Ge(IV), !n(III), La(III), Mn(II),
Mo(VI), Nb(V), Ni(II), Pr(III), Sb(V), Sc(III), Se(IV), Sn(IV), Ta(V), Tb(III), Te(IV),
Ti(IV), Vev), W(VI), Y(III), Yb(III), Zn(lI) and Zr(IV)] on a cation exchanger (Bio-
Rad® AG50W-X8) and an anion exchanger (Bio-Rad® AG1-X8) in varying oxalic
acid - sulphuric acid mixtures were successfully determined. The equilibrium
distribution coefficients of these selected metal ions were determined in both 0.05 M
and 0.25 M oxalic acid at various concentrations of sulphuric acid (0.005 M, 0.05 M,
0.10 M, 0.25 M, 0.50 M, 1.00 M, 1.50 M and 2.00 M). Attempts to explain the
sorption behaviour of the selected metal ions were made by using MINEQL+, a
speciation modelling program, and the speciation systems for AI(III), Cd(II), Co(II)
and Zn(lI) in varying oxalic acid - sulphuric acid mixtures were determined. Two
component [Zr(IV)-La(III); AI(III)-La(III); Ga(IlI)-Zn(II); As(V)-Zn(II); Cu(II)-
Ce(IV); Ga(III)-Ce(IV); Ge(IV)-Ce(III); Mo(VI)- Y(III); Nb(V)- Y(III); Ga(III)-Co(II);
As(V)-Co(lI) and Fe(III)-Mn(II)] and three component [Fe(III)-Ga(III)-Zn(lI) and
Zr(IV)-Ta(V)-Yb(III)] mixtures on a 10 ml or 13 ml cation exchange resin in a variety
of oxalic acid - sulphuric acid mixtures were successfully separated. Two component
[As(V)-Zr(IV); Co(II)-Fe(III); Ni(II)-Co(lI) and Ni(II)-Fe(III)] and three component
[Ni(II)-As(V)-Se(IV); AI(III)-Zn(II)-Ge(IV) and As(V)-Cu(II)-Ge(IV)] mixtures on a
10 ml or 13 ml anion exchange resin in a variety of oxalic acid - sulphuric acid
mixtures were also successfully separated and studied. It was also shown how some
of the elution curves developed above could easily be adapted for radiochemical
separations.
Usin~ the relevant data from the above study, a separation for 68Gefrom a Ga20 target
was developed according to a method based on acid dissolution of the target and
chromatography on an anion exchange resin (Bio-Rad® AG1-X8). The separated
68Geshowed high radionuclidic purity and an acceptable chemical purity. / AFRIKAANSE OPSOMMING: Die ewewigsverdelingskoëffisiënte van 32 metaalione [Al(III), As(V), Cd(II), Ce(III),
Ce(IV), Co(II), Cr(III), Cu(II), Fe(III), Ga(III), Ge(IV), In(III), La(III), Mn(ll), Mo(VI),
Nb(V), Ni(ll), Pr(Ill), Sb(V), Sc(III), Se(IV), Sn(IV), Ta(V), Th(Ill), Te(IV), Ti(IV),
vrv; W(VI), Y(III), Yb(III), Zn(lI) en Zr(IV)] op 'n katioonruiler (Bio-Rad®
AG50W-X8) en 'n anioonruiler (Bio-Rad® AG1-X8) in veranderende oksaalsuurswaelsuurmengsels
is met welslae bepaal. Die ewewigsverdelingskoëffisiënte van
hierdie geselekteerde elemente is in beide 0.05 Men 0.25 M oksaalsuur by verskeie
konsentrasies swaelsuur (0.005 M, 0.05 M, 0.10 M, 0.25 M, 0.50 M, 1.00 M, 1.50 M
en 2.00 M) bepaal. Daar is gepoog om die sorpsiegedrag van die geselekteerde
metaalione te verklaar deur die gebruik van MINEQL+, 'n spesiëringmodelleringsprogram,
en die spesiëringsisteme vir AI(III), Cd(II), Co(II) en Zn(lI) in
veranderende oksaalsuur-swaelsuurmengsels is bepaal. Tweekomponent [Zr(IV)-
La(III); AI(III)-La(II!); Ga(III)-Zn(Il); As(V)-Zn(II); Cu(II)-Ce(IV); Ga(III)-Ce(IV);
Ge(IV)-Ce(Il!); Mo(VI)- Y(III); Nb(V)- Y(ll!); Ga(Ill)-Co(Il); As(V)-Co(lI) en Fe(III)-
Mn(II)] en driekomponent [Fe(III)-Ga(III)-Zn(ll) en Zr(IV)- Ta(V)- Yb(III)] mengsels
op 'n 10 ml of 13 ml katioonruilhars in 'n verskeidenheid oksaalsuurswaelsuurmengsels
is met welslae geskei. Tweekomponent [As(V)-Zr(IV); Co(II)-
Fe(III); Ni(Il)-Co(lI) en Ni(II)-Fe(III)] en driekomponent [Ni(II)-As(V)-Se(IV);
AI(III)-Zn(Il)-Ge(IV) en As(V)-Cu(II)-Ge(IV)] mengsels op 'n 10 ml of 13 ml
anioonruilhars in 'n verskeidenheid oksaalsuur-swaelsuurmengsels is ook met welslae
geskei en bestudeer. Daar is ook aangetoon hoe sommige van die elueringskrommes
wat hierbo ontwikkel is, maklik vir radiochemiese skeidings aangepas sou kon word.
Deur gebruik te maak van die relevante data uit die studie hierbo, is 'n skeiding vir
68Geuit 'n Ga20-teiken ontwikkel volgens 'n metode gebaseer op suurdissolusie van
die teiken en chromatografie op 'n anioonruilhars (Bio-Rad® AG1-X8). Die geskeide
68Gehet hoë radionukliedsuiwerheid en 'n aanvaarbare chemiese suiwerheid getoon.
|
7 |
Structure elucidation of and synthetic approaches to monatin, a metabolite from Schlerochiton ilicifoliusAckerman, Louis Gabriel Jozua 12 1900 (has links)
Thesis (PhD)--Stellenbosch University , 1990. / ENGLISH ABSTRACT: Monatin, or 4-hydroxy-4-(3-indolylmethyl) glutamic acid is a high-intensity sweet tasting
amino acid found in the root bark of the indigenous plant Schlerochiton ilicifolius. In the
thesis the isolation, structure elucidation and a number of synthetic approaches toward
the total synthesis of monatin are described.
Extensive fractionation of an aqueous extract of the root bark of S. ilicifolius using
AG50WX8 strong acid cation exchange resin followed by successive gel filtration
procedures using Biogel P2- and Sephadex G10 gels and guided by the intense sweet
taste resulted in the isolation of monatin as a mixture of salts in which the sodium salt
predominates. Potassium and calcium are the two other cations present.
The structure elucidation is based mainly on the analysis of data obtained for monatin
and the lactone ester of the N-2,4-dinitrophenyl derivative, prepared by reaction of
monatin with Sangers reagent and diazomethane, by 1H and 13C n.m.r. techniques. The
X-ray crystallographic study of both monatin and the derivative proved disappointing in
that the reflections measured were weak and as a consequence refinement of the data
was severely curtailed. However the resultant structures do show the skeletal atoms of
the two compounds and in each case the relative stereochemistry of the two chiral
centres could be deduced. A comparison of the specific rotation of monatin with those
of related 4-hydroxy-4-methylglutamic acids indicates that monatin could have the
(2S,4S) configuration.
Retrosynthetic analysis of the monatin molecule identified a number of routes which
could be utilized for the synthesis of monatin and analogues in which the indole moiety is
replaced by a phenyl or aryl group. Seven approaches toward the synthesis of monatin
were investigated using in most instances model compounds to establish optimum
reaction conditions. Only the last approach, based on a 1,3-dipolar cyclo-addition
reaction met with a measure of success: reaction of the 1,3-dipolar compound formed by
reaction of N-t-Boc-indole-3-aldehyde with methyl N-benzylglycinate, with the
dipolarophile methyl 2-acetoxyacrylate, generated a pyrrolidine with the requisite
substituents needed for the monatin structure. In the event the final step, the cleavage of
the C-2--N bond of the substituted pyrrolidine ring to give monatin, failed.
During the investigation of the 1,3-dipolar cycloaddition reaction several substituted
pyrrolidines were prepared. In each case several racemic stereoisomers were formed. In
addition a number of substituted oxazolines and pyrrolizidines were obtained as minor
by-products during these reactions. The stereochemistry of these compounds was
deduced from the proton-proton nuclear Overhauser effect studies and X-ray
crystallographic data. / AFRIKAANSE OPSOMMING: Monatien, of 4-hidroksi-4-(3-indolielmetiel) glutamicnsuur is 'n aminosuur met 'n hoëintensiteit
soet smaak, wat in die wortelbas van die inheemse plant Schlerochiton ilicifolius voorkom. In die proefskrif word die isolasie, struktuuropklaring en 'n aantal sintetiese benaderings tot die totaalsintese daarvan beskryf.
Omvattende fraksionering van 'n waterige ekstrak van die wortelbas van S. ilicifolius met
behulp van AG50WX8 sterksuur-katioonuitruilhars gevolg deur opeenvolgende
gelfiltrasies op Biogel P2 en Sephadex G10 filtrasiegel met die intense soet smaak as
indikator, het gelei tot die isolasie van monatien as 'n mengsel van soute waarin die
natriumsout oorheers het. Kalium en kalsium is die ander twee katione wat ook
voorgekom het.
Die struktuuropklaring is hoofsaaklik gebaseer op 1H en 13C k.m.r.-data wat vir monatien
en die laktoonester van die N-2,4-dinitrofeniel derivaat verkry is. Laasgenoemde
verbinding is berei deur reaksie van monatien met Sanger se reagens en diasometaan.
Die X-straalkristallografiese studie van beide monatien en die derivaat het
teleurstellende resultate gelewer aangesien swak refleksie-intensiteite die
daaruitspruitende verfyning beperk het. Die verkreë strukture toon egter weI die
raamwerkatome van beide verbindings waaruit die relatiewe stereochemie van die twee
chirale sentra afgelei kon word. Vergelyking van die spesifieke rotasie van monatien
met die van die verwante 4-hidroksi-4-metielglutamiensure dui daarop dat monatien die (2S,4S) konfigurasie mag besit.
Retrosintetiese analises van monatien het 'n aantal sintetiese roetes aangedui wat gevolg
kon word vir die sintese van monatien en/of monatienanaloë waarin die indoolbrokstuk
denr 'n feniel of arielgroep vervang is. Sewe benaderings waarin modelverbindings
gebruik is om die gunstigste reaksietoestande te bepaal, is ondersoek. Slegs die laaste
benadering, gebaseer op 'n 1,3-dipolêre siklo-addisiereaksie was gedeeltelik suksesvol,
naamlik reaksie van die 1,3-dipolêre verbinding gevorm uit N-t-Boc-indool-3-aldehied en
metiel N-bensielglisinaat met 'n dipolarofiel, metiel-2-asetoksi-akrilaat, wat 'n
pirrolidien gelewer het met die vereiste substituente benodig vir die monatienstruktuur.
Die laaste stap, naamlik splyting van die C-2--N binding van die gesubstitueerde
pirrolidienring was onsuksesvol. Die ondersoek van die 1,3-dipolêre siklo-addisiereaksie het verskeie gesubstitueerde pirrolidiene as rasemiese sterioisomere gelewer. Hiermee saam het 'n aantal oksasoliene en pirrolisidiene as byprodukte gevorm en hulle strukture is met behulp van proton/proton kern-Overhauser-effekstudies en X-straalkristallografis afgelei.
|
8 |
Transport and extraction of Au(lll) using thiourea ligandsMebrahtu, Fanuel M. 12 1900 (has links)
Thesis (MSc)--Stellenbosch University, 2004. / ENGLISH ABSTRACT: A series of di- and mono-substituted acyl(aroyl) thioureas were examined for the
extraction and transportation of Au(III). Two-phase metal ion extraction experiments
were employed to investigate the extraction behaviour of these ligands. The effect of
varying ligand concentration on the extraction trend of these ligands was
investigated. The results show that the different substituent groups on the benzoyl
ring can affect the extraction pattern of the metal. Furthermore, the alkyl substituents
on the thiourea moiety and varying the ligand concentration have an influence on the
percentage of metal ion extracted. With the exception of the H2L2(N,N-di-propyl-N'-
benzoylthiourea ) ligand the di-alkyl substituted thioureas were more efficient for the
metal ion extraction than the mono-alkyl ligands. In almost all the experimental set
ups there was reduction of the Au(lIl) to Au(l) and Au(O) but it was more pronounced
with HL3 (N,N-di-(2-hydroxyethyl)-N'-benzoylthiourea).
Transport experiments were also conducted, the experimental set up for
transportation was a concentric type cell involving a 3-phase system - 2 aqueous
phases ( source and receiving phase) separated by a chloroform membrane
incorporating the ligand. The transport results however only gave a satisfactory result
of about 5% of gold transported by the HL1 (N,N-dibutyl-N'-benzoylthiourea). All other
ligands attempted resulted in metal ion being present in the organic phase, but no
metal ion present in the receiving phase. To help drive the transport of the metal ion
to the receiving phase CN-, S203 2- and perchloric acid were incorporated into the
receiving phase. The transport results were not enhanced with these substances
being present in the aqueous receiving phase. The aqueous source and receiving
phases were analyzed by flame atomic absorption spectroscopy (FAAS).
Finally the N,N-diethyl-N'-camphanoylthiourea (HL10) ligand and its complex with
Au(l) were synthesised. Single crystals of the complex were grown for X-ray
crystallography and the crystal and molecular structure of the complex was
determined. The complex crystallizes in the monoclinic space group P21. The cell
parameters are a = 10.7356(7)A b = 16.3443(11)A c = 10.9268(7)A f3 =
103.1450(10t , and final R-factor of 1.76%. The coordination sphere around Au(l)
shows a nearly linear arrangement of sulphur and chloride. / AFRIKAANSE OPSOMMING: In hierdie proefskrif is In aantal mono- en di-gesubstitueerde asiel(ariel) thioureums
ondersoek vir die transportasie en ekstraksie van Au(III). Twee-fase metaalioon
vloeistof-vloeistof ekstraksie eksperimente is gebruik om die ekstraksie patroon van
hierdie ligande te ondersoek. Die effek van verskillende ligand konsentrasies op die
ekstraksie neiging van hierdie ligande is ondersoek. Resultate toon dat die
verskillende substituente op die benziel ring die ekstraksie patroon van die
metaalioon beïnvloed. Verder, is gevind dat die alkiel substituente op die thioureum
saam met varierende ligand konsentrasies geensins die metaalioon ekstraksie
beïnvloed nie. Met die uitsondering van H2L2 (N,N-dipropiel-N'-benzielthioureum) is
die di-alkiel gesubstitueerde ligande meer effektief vir metaalioon ekstraksie in
vergelyking met die mono-alkiel ligande. In baie van die eksperimente is In reduksie
van Au(llI) na Au(l) en Au(O) gesien en dit is baie duidelik met ligand HL3 (N,N-di(2-
hidroksie-etiel)N'-benzielthioureum). Alle waterige fases is ge-analiseer met gebruik
van Atoomabsorpsie Spektroskopie (AAS).
Transportasie eksperimente is ook uitgevoer met gebruik van In drie-fase selsisteem.
Twee waterige fases (bron- en ontvang-fase) is geskei met die chloroform membraan
fase wat die ligande bevat. Hierdie eksperimente het net In 5% Au(lll) transportasie
getoon met HL1(N,N-dibutiel-N'-benzielthioureum). Daar was geen transportasie van
Au(lIl) met enige van die ander ligande. Analise van die twee waterige fases het
getoon dat die metaalioon eindelik goed ge-ekstraeer is en is teenwoordig in die
membraan fase. Om die transportasie van Au(lIl) aan te spoor, is CN-, s2ol- en
perchloorsuur in die ontvang-fase geinkorporeer. Die resultate was geensins
beïnvloed nie.
N,N-di-etiel-N'-kamfonielthioureum (HL10)ligande en die kompleks daarvan met Au(l)
is ook gesintetiseer. Enkel-kristalle van die kompleks is verkry en X-straal
kristallografiese analiese is onderneem. Hierdie kompleks kristalliseer in die
monokliniese ruimtegroep P21,met a =10.7356(7)Á, b=16.3443(11)Á, c=10.9268(7)Á
en ~=103.1450(10t. Die finale R-faktor is 1.76%. Die koordinasie om Au(l) toon In
liniêre geometrie met swael en chloor.
|
9 |
Electrochemistry and separation of transition metals with biodegradable ligandsKatata, L. M. 12 1900 (has links)
Thesis (MScEng) -- Stellenbosch University , 2001. / ENGLISH ABSTRACT: The electrochemical analysis of selected metal ions with the newly biodegradable
chelating agents, lminodisuccinic acid (IDS) and Polyaspartic acid (PASP) was
performed by cyclic voltammetry using a thin mercury film glassy carbon
microelectrode. IDS and PASP are of interest from an environmental perspective. They
were introduced as alternatives to chelants and dispersants.
The thermodynamic stability constants of these selected metal complexes were
determined by cyclic voltammetry (CV). A comparison with similar data obtained using
potentiometric methods shows a good correlation between the two methods. This
reaffirms that CV is a useful and facile means for evaluating metal-ligand complex
thermodynamic data. Furthermore, our results were used to validate the predicted models
obtained using an Equilibrium Speciation model JESS program.
Capillary Electrophoresis (CE) was used to separate metal-IDS and metal-PASP
complexes at different pH's. The separation of these chelates was achieved within 7
minutes. The obtained results were compared with speciation and a reasonable agreement
was observed, although the separation ofmetal-PASP showed poor broad peaks. / AFRIKAANSE OPSOMMING: Die elektrochemiese analise van geselekteerde metaal-ione met nuwe biodegredeerbare
chelate, Iminodisuksien suur (IDS) en Polyaspartiese suur was gedoen met sikliese
voltametrie deur gebruik te maak van 'n dun laag kwik glasagtige koolstof
mikroelektrode. Vanaf'n omgewingsstandpunt is IDS en PASP van belang. Hulle was
voorgestel as alternatiewe vir chelate en verspreidingsagente.
Die termodinamies stabiliteits konstantes van hierdie uitgesoekte metal komplekse was
bepaal deur middel van sikliese voltametrie (CV). 'n Vergelyking met soortgelyke data,
wat met potensiometriese metodes bepaal was, dui 'n goeie korrelasie aan tussen die twee
metodes bepaal was. Dit bevestig die feit dat CV 'n bruikbare en maklike manier is om
metal ligand komplekse se termodiniese data te evalueer. Die resultate was ook gebruik
om die voorspelde model, wat verkry was deur gebruik te maak van "Equilibrium
Speciation model JESS program, te bevestig.
Kapillere elektroforese (CE) was gebruik om metal-IDS en metal-PASP komplekse by
verskillende pH's te skei. Die skeiding van hierdie chelate was binne sewe minute verkry.
Hierdie resultate was vergelyk met die spesiasie data en 'n aanvaarbare ooreenstemming
was waargeneem, alhoewel die skeiding van die Metaal-PASP swak pieke toon.
|
10 |
Nuwe aspekte van a-olefien hidroformilering met groep 9 metaalkomplekseJulius, Gerrit Richard 12 1900 (has links)
Thesis (MSc )--Stellenbosch University, 2002. / ENGLISH ABSTRACT:
Please refer to fulltext for abstract / AFRIKAANSE OPSOMMING:
Sien volteks vir opsomming
|
Page generated in 0.4765 seconds