This study solves the problem of unsteady free convection from an inclined heated tube both numerically and analytically. The tube is taken to have an elliptic cross-section having a constant heat flux applied to its surface. The surrounding fluid is viscous and incompressible and infinite in extent. The Boussinesq approximation is used to describe the buoyancy force driving the flow. The underlying assumptions made in this work are that the flow remains laminar and two-dimensional for all time. This enables the Navier-Stokes and energy equations to be formulated in terms of the streamfunction, and vorticity. We assume that initially an impulsive heat flux is applied to the surface and that both the tube and surrounding fluid have the same initial temperature. The problem is solved subject to the no-slip and constant heat flux conditions on the surface together with quiescent far-field and initial conditions. An approximate analytical-numerical solution was derived for small times, t and large Grashof numbers, Gr. This was done by expanding the flow variables in a double series in terms of two small parameters and reduces to solving a set of differential equations. The first few terms were solved exactly while the higher-order terms were determined numerically. Flow characteristics presented include average surface temperature plots as well as surface vorticity and surface temperature distributions. The results demonstrate that the approximate analytical-numerical solution is in good agreement with the fully numerical solution for small t and large Gr.

This study solves the problem of unsteady free convection from an inclined heated tube both numerically and analytically. The tube is taken to have an elliptic cross-section having a constant heat flux applied to its surface. The surrounding fluid is viscous and incompressible and infinite in extent. The Boussinesq approximation is used to describe the buoyancy force driving the flow. The underlying assumptions made in this work are that the flow remains laminar and two-dimensional for all time. This enables the Navier-Stokes and energy equations to be formulated in terms of the streamfunction, and vorticity. We assume that initially an impulsive heat flux is applied to the surface and that both the tube and surrounding fluid have the same initial temperature. The problem is solved subject to the no-slip and constant heat flux conditions on the surface together with quiescent far-field and initial conditions. An approximate analytical-numerical solution was derived for small times, t and large Grashof numbers, Gr. This was done by expanding the flow variables in a double series in terms of two small parameters and reduces to solving a set of differential equations. The first few terms were solved exactly while the higher-order terms were determined numerically. Flow characteristics presented include average surface temperature plots as well as surface vorticity and surface temperature distributions. The results demonstrate that the approximate analytical-numerical solution is in good agreement with the fully numerical solution for small t and large Gr.

Dans ce mémoire, nous étudions le problème de l'estimation de la variance pour les estimateurs par double dilatation et de calage pour l'échantillonnage à deux phases. Nous proposons d'utiliser une décomposition de la variance différente de celle habituellement utilisée dans l'échantillonnage à deux phases, ce qui mène à un estimateur de la variance simplifié. Nous étudions les conditions sous lesquelles les estimateurs simplifiés de la variance sont valides. Pour ce faire, nous considérons les cas particuliers suivants : (1) plan de Poisson à la deuxième phase, (2) plan à deux degrés, (3) plan aléatoire simple sans remise aux deux phases, (4) plan aléatoire simple sans remise à la deuxième phase. Nous montrons qu'une condition cruciale pour la validité des estimateurs simplifiés sous les plans (1) et (2) consiste à ce que la fraction de sondage utilisée pour la première phase soit négligeable (ou petite). Nous montrons sous les plans (3) et (4) que, pour certains estimateurs de calage, l'estimateur simplifié de la variance est valide lorsque la fraction de sondage à la première phase est petite en autant que la taille échantillonnale soit suffisamment grande. De plus, nous montrons que les estimateurs simplifiés de la variance peuvent être obtenus de manière alternative en utilisant l'approche renversée (Fay, 1991 et Shao et Steel, 1999). Finalement, nous effectuons des études par simulation dans le but d'appuyer les résultats théoriques. / In this thesis we study the problem of variance estimation for the double expansion estimator and the calibration estimators in the case of two-phase designs. We suggest to use a variance decomposition different from the one usually used in two-phase sampling, which leads to a simplified variance estimator. We look for the necessary conditions for the simplified variance estimators to be appropriate. In order to do so, we consider the following particular cases : (1) Poisson design at the second phase, (2) two-stage design, (3) simple random sampling at each phase, (4) simple random sampling at the second phase. We show that a crucial condition for the simplified variance estimator to be valid in cases (1) and (2) is that the first phase sampling fraction must be negligible (or small). We also show in cases (3) and (4) that the simplified variance estimator can be used with some calibration estimators when the first phase sampling fraction is negligible and the population size is large enough. Furthermore, we show that the simplified estimators can be obtained in an alternative way using the reversed approach (Fay, 1991 and Shao and Steel, 1999). Finally, we conduct some simulation studies in order to validate the theoretical results.

Dans ce mémoire, nous étudions le problème de l'estimation de la variance pour les estimateurs par double dilatation et de calage pour l'échantillonnage à deux phases. Nous proposons d'utiliser une décomposition de la variance différente de celle habituellement utilisée dans l'échantillonnage à deux phases, ce qui mène à un estimateur de la variance simplifié. Nous étudions les conditions sous lesquelles les estimateurs simplifiés de la variance sont valides. Pour ce faire, nous considérons les cas particuliers suivants : (1) plan de Poisson à la deuxième phase, (2) plan à deux degrés, (3) plan aléatoire simple sans remise aux deux phases, (4) plan aléatoire simple sans remise à la deuxième phase. Nous montrons qu'une condition cruciale pour la validité des estimateurs simplifiés sous les plans (1) et (2) consiste à ce que la fraction de sondage utilisée pour la première phase soit négligeable (ou petite). Nous montrons sous les plans (3) et (4) que, pour certains estimateurs de calage, l'estimateur simplifié de la variance est valide lorsque la fraction de sondage à la première phase est petite en autant que la taille échantillonnale soit suffisamment grande. De plus, nous montrons que les estimateurs simplifiés de la variance peuvent être obtenus de manière alternative en utilisant l'approche renversée (Fay, 1991 et Shao et Steel, 1999). Finalement, nous effectuons des études par simulation dans le but d'appuyer les résultats théoriques. / In this thesis we study the problem of variance estimation for the double expansion estimator and the calibration estimators in the case of two-phase designs. We suggest to use a variance decomposition different from the one usually used in two-phase sampling, which leads to a simplified variance estimator. We look for the necessary conditions for the simplified variance estimators to be appropriate. In order to do so, we consider the following particular cases : (1) Poisson design at the second phase, (2) two-stage design, (3) simple random sampling at each phase, (4) simple random sampling at the second phase. We show that a crucial condition for the simplified variance estimator to be valid in cases (1) and (2) is that the first phase sampling fraction must be negligible (or small). We also show in cases (3) and (4) that the simplified variance estimator can be used with some calibration estimators when the first phase sampling fraction is negligible and the population size is large enough. Furthermore, we show that the simplified estimators can be obtained in an alternative way using the reversed approach (Fay, 1991 and Shao and Steel, 1999). Finally, we conduct some simulation studies in order to validate the theoretical results.