Increasing modernization of the world has brought about a human component to natural disasters, which are exacerbated by the growing threat of climate change. The Western United States and Australia have witnessed some of the deadliest, costliest, and destructive wildfires in the recent past with downed electric power lines being a significant factor amongst the causes. The relationship between wildfires and powerlines is not a newly discovered phenomenon, however, utilities across the globe are struggling to find an optimal solution to this problem. While existing regulations allow utilities to schedule power shutdowns, they are often accompanied by massive financial losses and discomfort to consumers. Utilities also need to factor in the climatic conditions in the region of their service and the flammability of the vegetation surrounding their lines while making decisions pertaining to system planning, load shedding, and protection. This multi-faceted problem can be dealt with in multiple ways – one such technique involves detection of a falling line into sensitive vegetation before it encounters the earth. This approach essentially boils down the problem into detecting a single line open circuit fault. The open circuit is momentary and hence, speed is of the essence in such a protection scheme. In this thesis, detection of an open circuit is carried out in two different ways, viz., with and without communication support between the various elements of the system, with the latter technique being a novel proposal with the aim of achieving a secure protection scheme with minimal additional infrastructural requirements. / Master of Science / The contact of a live wire with the earth is a fault. While most faults can be cleared using traditional protection techniques, there is a higher risk associated with power lines that come in contact with dry surfaces, flammable plants, and bushes, which cannot be detected that easily. These surfaces offer very high resistance to the flow of current and are hence termed high impedance faults. These high impedance faults have the potential to spark and cause a fire, which can snowball into a wildfire depending on the geography and climatic conditions of the area. For years, this has been a major problem in places like Australia and California leading to loss of lives, power, and money, but the optimal solution is evasive. While several techniques to combat this problem exist, the focus of this thesis is essentially what is known as the Open Circuit Fault. The technique revolves around the detection of the fault while the falling conductor is midair. Given the short time frame, high-speed detection is of the essence. This thesis will focus on achieving open circuit detection without the need for any communication support and is a novel contribution to this field.

abstract: The safety issue in an electrical power distribution system is of critical importance. In some circumstances, even the continuity of service has to be compromised for a situation that can cause a hazard to the public. A downed conductor that creates an electrical path between a current carrying conductor and ground pose a potential lethal hazard to anyone in the near proximity. Electric utilities have yet to find a fully accepted and reliable method for detecting downed conductors even with decades of research. With the entry of more automation and a smarter grid in the different layers of distribution power system supply, new doors are being opened and new feasible solutions are waiting to be explored. The 'big data' and the infrastructures that are readily accessible through the smart metering system is the base of the work and analysis performed in this thesis. In effect, the new technologies and new solutions are an artifact of the Smart Grid effort which has now reached worldwide dimensions. A solution to problems of overhead distribution conductor failures / faults that use simple methods and that are easy to implement using existing and future distribution management systems is presented. A European type distribution system using three phase supply is utilized as the test bed for the concepts presented. Fault analysis is performed on the primary and the secondary distribution system using the free downloadable software OpenDSS. The outcome is a set of rules that can be implemented either locally or central using a voltage based method. Utilized in the distribution management systems the operators will be given a powerful tool to make the correct action when a situation occurs. The test bed itself is taken from an actual system in Norway. / Dissertation/Thesis / Masters Thesis Electrical Engineering 2014

This thesis describes an investigation into the influences of arcing and conductor deflection due to magnetic forces on the accuracy of fault locator algorithms in electrical distribution networks. The work also explores the possibilities of using the properties of an arc to identify two specific types of faults that may occur on an overhead distribution line. A new technique using the convolution operator is introduced for deriving differential equation algorithms. The first algorithm was derived by estimating the voltage as an array of impulse functions while the second algorithm was derived using a piecewise linear voltage signal. These algorithms were tested on a simulated single-phase circuit using a PI-model line. It was shown that the second algorithm gave identical results as the existing dynamic integration operator type algorithm. The first algorithm used a transformation to a three-phase circuit that did not require any matrix calculations as an equivalent sequence component circuit is utilised for a single-phase to ground fault. A simulated arc was used to test the influence of the non-linearity of an arc on the accuracy of this algorithm. The simulations showed that the variation in the resistance due to arcing causes large oscillations of the algorithm output and a 40th order mean filter was used to increase the accuracy and stability of the algorithm. The same tests were performed on a previously developed fault locator algorithm that includes a square-wave power frequency proximation of the fault arc. This algorithm gave more accurate and stable results even with large arc length variations. During phase-to-phase fault conditions, two opposing magnetic fields force the conductors outwards away from each other and this movement causes a change in the total inductance of the line. A three dimensional finite element line model based on standard wave equations but incorporating magnetic forces was used to evaluate this phenomenon. The results show that appreciable errors in the distance estimations can be expected especially on poorly tensioned di stribution lines.New techniques were also explored that are based on identification of the fault arc. Two methods were successfully tested on simulated networks to identify a breakingconductor. The methods are based on the rate of increase in arc length during the breaking of the conductor. The first method uses arc voltage increase as the basis of the detection while the second method make use of the increase in the non-linearity of the network resistance to identify a breaking conductor. An unsuccessful attempt was made to identifying conductor clashing caused by high winds: it was found that too many parameters influence the separation speed of the two conductors. No unique characteristic could be found to identify the conductor clashing using the speed of conductor separation. The existing algorithm was also used to estimate the voltage in a distribution network during a fault for power quality monitoring purposes.