Spelling suggestions: "subject:"raw solution"" "subject:"draw solution""
1 |
Forward osmosis using organic cationic draw solutions for water recoveryHamad, Mohammed J.A. January 2017 (has links)
Forward Osmosis (FO) is an emerging technology which has potential to operate with minimum energy input. High performance of FO systems depend on the availability of a suitable Draw Solution. Different types of Draw Solutions have been proposed, however; choosing a suitable one is still a developing area within the FO field. There is an urgent need to explore new materials in order to develop an efficient FO system. The current study aims at investigating the performance of three Draw Solutions namely, L-Alanine, DADMAC and PolyDADMAC as osmotic agents for FO. These organic cationic solutions can be used as extraction agents of water from poorer quality organic solutes such as fumaric acid solution produced in a continuous flow microbial fermentation process. The performance of the three Draw Solutions was evaluated by measuring the water flux and reverse solute diffusion at different concentrations. The viability of reconcentration of the diluted Draw Solutions was also investigated using Nanofiltration system. The performance and the efficiency of the Draw Solutions were studied via two separated bench scale systems of FO and Nanofiltration. Both Cellulose Triacetate (CTA) and Thin Film Composite (TFC) aquaporin protein FO membranes were employed under different orientations in FO set up operated for 24 hours or longer. In this study, NF90 membrane was used for reconcentration the Draw Solutions. A series of experiments were conducted to obtain the best water flux and reverse solute diffusion under various influencing operating conditions. The experiments were designed to achieve three objectives, i.e. (i) optimum operating conditions for FO system, (ii) optimum operating conditions for the reconcentration system, and (iii) implementation of the optimum operating conditions of the FO system for water recovery from a fumaric acid solution produced by a simulated industrial fermentation process. In the initial stage, L-Alanine Draw Solution demonstrated that it was the most viable agent for FO. It was established that L-Alanine Solution at 0.085 g/mL concentration achieved the highest initial water flux and the lowest reverse solute diffusion through both CTA and TFC aquaporin protein FO membranes. In the second stage, a Nanofiltration system was proven to be effective in the reconcentration of the diluted L-Alanine Draw Solution. The average rejection of L-Alanine ions achieved by NF90 membrane was 96.00%. Drawing on the previous results, the third stage was used to investigate the viability of the FO system in water recovery from fumaric acid solution produced by continuous microbial fermentation process using L-Alanine as a Draw Solution. The reduction of water content of the fumaric acid solution made it to concentrate by 26.00% and 19.80% in 32_ and 17_, respectively. Consequently, FO technology is an effective way to concentrate a fumaric acid solution produced by continuous microbial fermentation process. Based on the results, it is recommended that LAlanine should be proposed in the FO process according to its reliability and effectiveness as a viable draw agent. TFC aquaporin protein membrane is also recommended to be used in recover the water from fumaric acid solution produced by fermentation processes. Further studies should be done to investigate the viability of FO in water recovery from advanced application such as downstream bioprocessing. / Dissertation (MEng)--University of Pretoria, 2017. / Chemical Engineering / MEng / Unrestricted
|
2 |
A performance and energy evaluation of a dye drawn forward osmosis (FO) system for the textile industryRahman, Mohammed January 2020 (has links)
Thesis (MEng (Chemical Engineering))--Cape Peninsula University of Technology, 2020 / Continuous growth in the world population has raised significant fears with regards to the sustainability of energy and water resources. Globally, water is an indispensable resource as it is essential for the sustenance of human, animal and plant life. Water is essential for all forms of life and plays a pivotal role in economic growth. The textile industry is one of the greatest consumers of water, it is, therefore, necessary to effectively treat the large amounts of wastewater before discharge to the environment. It is estimated that annually, more than 700,000-tonnes of textile wastewater is produced by the dyeing industry. Textile wastewater is generally characterised by electrolytes, suspended solids, mineral oils and multiple textile dyes, and has therefore been classified as one of the most polluting wastewaters. These dyes are toxic and, in most cases, are not biodegradable. The presence of very small amounts (i.e. < 1 ppm) of dyes in water has aesthetic impacts and is thus undesirable. It is, therefore, necessary to treat textile wastewater before discharging.
Currently, membrane technology is widely used for wastewater treatment, as well as water purification. Forward osmosis (FO) is a promising technology for both these applications. FO is characterised by the flow of water through a semipermeable membrane from a feed solution (FS) characterised by the low solute concentration or low osmotic pressure (OP) to a draw solution (DS) characterised by the high solute concentration or high OP, due to the OP gradient across the membrane. The FO process eliminates the need for high hydraulic pressure, as required in traditional membrane technologies, and also has low fouling tendencies. Furthermore, FO has the advantage of lower energy requirements and membrane replacement costs. However, there are still many disadvantages such as reverse solute flux (RSF), membrane fouling, and concentration polarisation (CP) amongst others that still need to be addressed. Therefore, more research needs to be done in light of these limitations to better understand and mitigate these limitations to increase the effectiveness and efficiency of the FO process.
This study aimed to evaluate a dye-driven FO system for the reclamation of water from textile wastewater and synthetic brackish water (BW5) by investigating the effects of membrane orientation, system flowrate, change in DS, and membrane fouling on the FO systems performance and energy consumption. The FS used was BW5 with sodium chloride (NaCl) content of 5 g/L whereas Reactive Black 5 (i.e. a reactive dye) and Maxilon Blue GRL (i.e. a basic dye) dyes were used as a DS, respectively. The membrane utilised was a cellulose triacetate (CTA) membrane and was tested in FO mode and pressure retarded osmosis (PRO) mode whilst the system flowrate was adjusted to 400, 500 and 600 mL/min, respectively. Experiments were performed using a bench-scale FO setup which comprised of an FO membrane cell, a double-head variable speed peristaltic pump, a digital scale, two reservoirs for the FS and DS, respectively, a digital multiparameter meter and a digital electrical multimeter to measure system energy consumption. Each experiment comprised of six steps: baseline 1 (membrane control), main experiment (dye-driven FO experiment), baseline 2 (membrane control repeat), membrane cleaning, membrane integrity (membrane damage dye identification) and membrane cleaning (preparation for next experiment). The baseline 1 and baseline 2 experiments operated for 3 h whilst each membrane cleaning procedure operated for 30 min. The main experiments operated for 5 h in the FO mode and 4 h in PRO mode whilst the membrane integrity experiments operated until a minimum of 10 mL water was recovered.
Results showed that the PRO mode achieved both higher forward flux (𝐽𝑤) (i.e. 8.87, 8.71 and 9.13 L/m2.h for flowrates of 400, 500 and 600 ml/min) and water recovery (𝑅𝑒) rates compared to FO mode (i.e. 6.60, 6.88 and 7.58 L/m2.h for flowrates of 400, 500 and 600 ml/min). The variation of flowrates had little to no influence on the 𝐽𝑤, 𝐽𝑠 and 𝑅𝑒 of the system. The system consumed less energy in PRO mode (i.e. 381 kWh/m3 average consumption for all three flowrates) than FO mode (i.e. 417 kWh/m3 average consumption for all three flowrates). It was also observed that at a higher DS 𝑂𝑃, the system consumed less energy. Therefore, selecting an optimum initial 𝑂𝑃 is essential for a FO process to minimise the pumping energy.
Furthermore, a change in DS from Reactive Black 5 dye to Maxilon Blue GRL dye had no significant impact on the system performance and energy consumption. In this study, no significant membrane fouling was observed, however, minute traces of fouling in the form of foreign functional groups could be observed in the attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) spectrums of the used membranes. Additionally, the observation of negligible changes in baseline 2 (membrane control) Re and Jw results suggested the possible occurrence of membrane fouling during the main experiment (dye-driven FO system).
|
Page generated in 0.0779 seconds