abstract: Polymer fibers have broad applications in wearable electronics, bulletproof vests, batteries, fuel cells, filters, electrodes, conductive wires, and biomedical materials. Polymer fibers display light density and flexibility but are mostly weak and compliant. The ceramic, metallic, and carbon nanoparticles have been frequently included in polymers for fabricating continuous, durable, and functional composite fibers. Nanoparticles display large specific areas, low defect density and can transfer their superior properties to polymer matrices. The main focus of this thesis is to design, fabricate and characterize the polymer/nanocarbon composite fibers with unique microstructures and improved mechanical/thermal performance. The dispersions and morphologies of graphene nanoplatelets (GNPs), the interactions with polyvinyl alcohol (PVA) molecules and their influences on fiber properties are studied. The fibers were fabricated using a dry-jet wet spinning method with engineered spinneret design. Three different structured fibers were fabricated, namely, one-phase polymer fiber (1-phase), two-phase core-shell composite fiber (2-phase), and three-phase co-axial composite fiber (3-phase). These polymer or composite fibers were processed at three stages with drawing temperatures of 100˚C, 150˚C, and 200˚C. Different techniques including the mechanical tester, wide-angle X-Ray diffraction (WAXD), scanning electron microscope (SEM), thermogravimetric analysis (TGA), and differential scanning calorimeter (DSC) have been used to characterize the fiber microstructures and properties. / Dissertation/Thesis / Masters Thesis Mechanical Engineering 2018

Carbon fiber is a lightweight, versatile material with many current and potential applications. To be able to expand the market for carbon fiber composites in other areas than special applications the production costs must be reduced. One way of accomplishing this could be to use a less expensive raw material where lignin is a good example as it can be provided at lower cost, is renewable and abundantly available compared to commercially used raw materials today. So far, the mechanical properties of lignin-based carbon fibers are inferior relative to commercial carbon fibers. For lignin-based carbon fibers to enter the commercial market more research is necessary to gain knowledge of the conversion of lignin to carbon fiber. The LightFibre project investigates the possibilities to produce carbon fibers based on a mixture of softwood kraft lignin and cellulose. The kraft lignin is isolated from black liquor in the kraft/sulfate process with the LignoBoost process. This master thesis project was conducted within in the LightFibre project and evaluated whether metal ions generally present in kraft lignin had an influence on the final carbon fiber quality in terms of mechanical properties and morphology. The mechanical properties were determined with tensile testing, the morphology by scanning electron microscopy (SEM) and the relative abundance of studied elements with electron dispersive spectroscopy (EDS). The influence of the chosen metal ions was tested by impregnation of dry-jet wet spun prefibers based on 70 wt.% softwood kraft lignin and 30 wt.% dissolving pulp cellulose. The fibers were impregnated in room temperature with solutions containing Na2SO4, K2SO4, MgSO4, FeSO4 and Al2(SO4)3 salts where the cations were the focus in these trials. The concentrations used for impregnation were 0.2 and 1M of the cations. The obtained mechanical properties of the carbon fibers of the samples impregnated with different metal ions did not deviate significantly from the reference which had a tensile strength of 870 MPa and tensile modulus of 68 GPa. The analysis of morphology with SEM showed no defects or damage of any of the fibers. Therefore, it was concluded that the impregnated metal ions: K+, Na+, Al3+, Mg2+ and Fe2+ at the obtained levels in the fibers cause no effects on the fibers during the stabilization and carbonization that affects the mechanical performance of final carbon fiber.  The amount of potassium in one of the samples was estimated to 0.1 wt.%. From the results of this study it may be suggested that the general recommendation of <0.1 wt.% ash in lignin can be exceeded, for dry-jet wet-spun kraft lignin/cellulose-based carbon fibers.

abstract: Precursors of carbon fibers include rayon, pitch, and polyacrylonitrile fibers that can be heat-treated for high-strength or high-modulus carbon fibers. Among them, polyacrylonitrile has been used most frequently due to its low viscosity for easy processing and excellent performance for high-end applications. To further explore polyacrylonitrile-based fibers for better precursors, in this study, carbon nanofillers were introduced in the polymer matrix to examine their reinforcement effects and influences on carbon fiber performance. Two-dimensional graphene nanoplatelets were mainly used for the polymer reinforcement and one-dimensional carbon nanotubes were also incorporated in polyacrylonitrile as a comparison. Dry-jet wet spinning was used to fabricate the composite fibers. Hot-stage drawing and heat-treatment were used to evolve the physical microstructures and molecular morphologies of precursor and carbon fibers. As compared to traditionally used random dispersions, selective placement of nanofillers was effective in improving composite fiber properties and enhancing mechanical and functional behaviors of carbon fibers. The particular position of reinforcement fillers with polymer layers was enabled by the in-house developed spinneret used for fiber spinning. The preferential alignment of graphitic planes contributed to the enhanced mechanical and functional behaviors than those of dispersed nanoparticles in polyacrylonitrile composites. The high in-plane modulus of graphene and the induction to polyacrylonitrile molecular carbonization/graphitization were the motivation for selectively placing graphene nanoplatelets between polyacrylonitrile layers. Mechanical tests, scanning electron microscopy, thermal, and electrical properties were characterized. Applications such as volatile organic compound sensing and pressure sensing were demonstrated. / Dissertation/Thesis / Masters Thesis Materials Science and Engineering 2020

It is in the nature of the human species to find solutions of complex technical problems and always strive for improvements. The development of new materials is not an exception. One of the many man-made materials is carbon fibre (CF). Its excellent mechanical properties and low density have made it attractive as the reinforcing agent in lightweight composites. However, the high price of CF originating from expensive production is currently limiting CF from wider utilisation, e.g. in the automotive sector.   The dominating raw material used in CF production is petroleum-based polyacrylonitrile (PAN). The usage of fossil-based precursors and the high price of CF explain the strong driving force of finding cheaper and renewable alternatives. Lignin and cellulose are renewable macromolecules available in high quantities. The high carbon content of lignin is an excellent property, while its structural heterogeneity yields in CF with poor mechanical properties. In contrast, cellulose has a beneficial molecular orientation, while its low carbon content gives a low processing yield and thus elevates processing costs.   This work shows that several challenges associated with CF processing of each macromolecule can be mastered by co-processing. Dry-jet wet spun precursor fibres (PFs) made of blends of softwood kraft lignin and kraft pulps were converted into CF. The corresponding CFs demonstrated significant improvement in processing yield with negligible loss in mechanical properties relative to cellulose-derived CFs. Unfractionated softwood kraft lignin and paper grade kraft pulp performed as good as more expensive retentate lignins and dissolving grade kraft pulp, which is beneficial from an economic point of view.   The stabilisation stage is considered the most time-consuming step in CF manufacturing. Here it was shown that the PFs could be oxidatively stabilised in less than 2 h or instantly carbonised without any fibre fusion, suggesting a time-efficient processing route. It was demonstrated that PF impregnation with ammonium dihydrogen phosphate significantly improves the yield but at the expense of mechanical properties.   A reduction in fibre diameter was beneficial for the mechanical properties of the CFs made from unfractionated softwood kraft lignin and paper grade kraft pulp. Short oxidative stabilisation (&lt;2 h) of thin PFs ultimately provided CFs with tensile modulus and strength of 76 GPa and 1070 MPa, respectively. Considering the high yield (39 wt%), short stabilisation time and promising mechanical properties, the concept of preparing CF from lignin:cellulose blends is a very promising route. / Det ligger i människans natur att hitta lösningar på komplexa tekniska problem, samt att alltid sträva efter förbättringar. Utvecklingen av nya material är inget undantag. Ett av flera material utvecklade av människan är kolfiber. Dess utmärkta mekaniska egenskaper samt låga densitet har gjort det attraktivt som förstärkningsmaterial i lättviktskompositer. Det höga priset på kolfiber, vilket härstammar ur en kostsam framställningsprocess, har förhindrat en mer utbredd användning i exempelvis bilindustrin.   Det dominerande råmaterialet för kolfiberframställning är petroleumbaserad polyacrylonitril (PAN). Användandet av fossila råvaror och det höga priset på kolfiber förklarar den starka drivkraften att hitta billigare och förnyelsebara alternativ. Lignin och cellulosa är förnyelsebara makromolekyler som finns tillgängliga i stora kvantiteter. Det höga kolinnehållet i lignin gör det mycket attraktivt som råvara för kolfiberframställning, men dess heterogena struktur ger en kolfiber med otillräckliga mekaniska egenskaper. Däremot har cellulosa en molekylär orientering som är önskvärd vid framställning av kolfiber, men dess låga kolinehåll ger ett lågt processutbyte som i sin tur bidrar till höga produktionskostnader.             Det här arbetet visar att många av de problem som uppstår med kolfiber från respektive råvara kan kringgås genom att utgå från blandningar av desamma. Prekursorfibrer från blandningar av kraftlignin och kraftmassa från barrved tillverkade med luftgapsspinning konverterades till kolfiber. Utbytet för kolfibrerna som framställdes var mycket högre än vid framställning från endast cellulosa. Ofraktionerat barrvedslignin och kraftmassa av papperskvalitet presterade lika bra som de dyrare retentatligninen och dissolvingmassan, vilket är fördelaktigt ur ett ekonomiskt perspektiv.   Stabilisering är det mest tidskrävande processteget i kolfibertillverkning. I det här arbetet visades det att prekursorfibrerna kunde stabiliseras på kortare än två timmar, eller direktkarboniseras utan någon sammansmältning av fibrerna. Detta indikerar att en tidseffektiv produktion kan vara möjligt. Impregnering av prekursorfibrerna med ammoniumdivätefosfat ökade utbytet avsevärt, men med lägre mekaniska egenskaper som bieffekt.           Kolfibrernas mekaniska egenskaper ökade vid en diameterreduktion. En kort oxidativ stabilisering under två timmar i kombination med tunna prekursorfibrer gav kolfiber med en elasticitetsmodul på 76 GPa och dragstyrka på 1070 MPa. Att göra kolfiber från blandningar av lignin och cellulosa är ett lovande koncept om det höga utbytet (39%), den korta stabiliseringstiden samt de lovande mekaniska egenskaperna tas i beaktande. / <p>QC 20190226</p>