The thesis describes the relaxation properties of bituminous binders determined in dynamic shear rheometer (DSR). Paving bitumen, polymer modified bitumen (PMB) and crumb rubber modified bitumen (CRmB) were chosen for comparison. In order to describe the effects of ageing on asphalt binders relaxation properties, the laboratory simulation of ageing using RTFOT and 3xRTFOT method was performed. For each binder were simultaneously conducted tests of needle penetration, softening point and elastic recovery. Selected bitumens were used for the production of asphalt mixtures. The low-temperature properties tests (TSRST) were performed for these mixtures, when the results were compared to the relaxation properties of binders determined in the DSR.

The theoretical part of this thesis describes the rheology of bituminous binders, aging of asphalt binders and laboratory methods simulating short and long term aging. The following describes an empirical tests (needle penetration, softening point ring ball method) and functional tests (complex shear modulus and phase angle, dynamic viscosity), which are performed in the dynamic shear rheometer. At the end of this section, laboratory aging of bituminous binders using method RTFOT and method RTFOT + PAV is described in more detail. In the practical part of this thesis, the results of all tests performed on the binders aged using RTFOT + PAV are introduced and compared with results of properties of non-aged binders and binders aged by 3xRTFOT.

Dissertation thesis is focused on rheological properties of asphalt binders and on changes of their performance during the lifetime in road structures. Aging processes of asphalt binders and methods of laboratory aging are described in the theoretical part of the thesis. Furthermore, basic rheological models and related test methods for the evaluation of asphalt binders are described. In the practical part, properties of asphalt binders are investigated after aging process and their performance is evaluated by empirical and functional test methods. The various methods of aging are compared with each other and a relationship between real conditions and laboratory aging is researched. In the next section, vacuum flashed cracked residue (VFCR) is added to the selected asphalt binders and their influence on rheological properties during description of aging of asphalt binders is investigated. The results were used in publication of two certified methodology under the title „The methodology for the evaluation of paving bitumen in terms of susceptibility to thermal oxidative aging“ and „The methodology describes laboratory aging of asphalt mixtures“. The results of the thesis are listed in the conclusion.

Subject of this diploma thesis is to describe the effect of adding different amount of aged binder recovered from RAP on the change of properties of polymer modified bitumen. The RAP containing unmodified bitumen and the RAP where we can expect bitumen modification are used to recover binder. The binder obtained from RAP is dosed into the virgin binder in amount of 15 %, 30 % and 50 %. The methods of recycling of flexible pavements, extraction and regeneration of asphalt binders, rejuvenating of their properties and methods of empirical and functional laboratory tests are described in the theoretical part. The practical part deals with evaluating and comparison of the results mixed binders properties.