Yes / An integrated Finite Element Method (FEM) model is proposed to investigate the dynamic seabed response for several specific pipeline layouts and to simulate the pipeline stability under waves loading. In the present model, the Reynolds-Averaged Navier-Stokes (RANS) equations are used to describe the wave motion in a fluid domain, while the seabed domain is described using the Biot’s poro-elastic theory. The interface between water and air is tracked by conservative Level Set method (LSM). The FEM and backward differentiation formula (BDF) are applied for spatial and temporal discretization respectively in the present model. One-way coupling is used to integrate flow and seabed models. The present model is firstly validated using several available laboratory experiments. It is then further extended to practical engineering applications, including the dynamic seabed response for the pipeline mounted on a flat seabed or inside a trench. The results show that the pipeline buried to a certain depth is better protected than that under partially buried in terms of transient liquefaction. / Energy Technology Partnership (ETP), Wood Group Kenny

Yes / Stability and safety of offshore wind turbines with mono-pile foundations, affected by nonlinear wave effect and dynamic seabed response, are the primary concerns in offshore foundation design. In order to address these problems, the nonlinear wave effect on dynamic seabed response in the vicinity of mono-pile foundation is investigated using an integrated model, developed using OpenFOAM, which incorporates both wave model (waves2Foam) and Biot’s poro-elastic model. The present model was validated against several laboratory experiments and promising agreements were obtained. Special attention was paid to the systematic analysis of pore water pressure as well as the momentary liquefaction in the proximity of mono-pile induced by nonlinear wave effects. Various embedment depths of mono-pile relevant for practical engineering design were studied in order to attain the insights into nonlinear wave effect around and underneath the mono-pile foundation. By comparing time-series of water surface elevation, inline force, and wave-induced pore water pressure at the front, lateral, and lee side of mono-pile, the distinct nonlinear wave effect on pore water pressure was shown. Simulated results confirmed that the presence of mono-pile foundation in a porous seabed had evident blocking effect on the vertical and horizontal development of pore water pressure. Increasing embedment depth enhances the blockage of vertical pore pressure development and hence results in somewhat reduced momentary liquefaction depth of the soil around the mono-pile foundation. / Energy Technology Partnership (ETP), Wood Group Kenny, and University of Aberdeen; the National Science Fund for Distinguished Young Scholars (51425901) and the 111 project (B12032).