No description available.

This semestral thesis deals with methods for continuous estimation of the quality of the ECG signal. The theoretical part includes the functional anatomy of the heart, the basics of electrocardiography, the types of noise that can be found in the ECG records, and a description of several methods for the continuous estimation of the ECG signal quality. Next here are some approaches to segmenting ECG signals based on their quality. The practical part deals with the implementation of two methods. The first method is the SNR estimation method based on the Wiener filter. The second method is the method of segmentation of ECG signals based on their quality. Both methods were tested on artificial and real signals.

This diploma thesis deals with the topic of the ECG quality evaluation. The theoretical part of the thesis contains an overview of the methods, which were studied and an explanation of the basic principles connected with the quality evaluation of the ECG signals. The practical part deals with the implementation of three selected methods, one of which is the continuous evaluation of signal quality by means of SNR (signal to noise ratio) calculation. The results of these methods are further discussed and compared.

This project investigates methods of construction the wavelet-based QRS-complex detector. QRS-complex detection is very important, because it helps automatically calculate heart rate and in some cases it is used for compression ECG signal. The design of QRS detector can be made with many methods, in this project were mentioned and consequently tested only a few variants. The principle of designed detector used a wavelet-based decomposition of the original ECG signal to several frequency-coded bands. These bands are consequently transformed to absolute values and with the help of the threshold value are marked positions of assumed QRS complexes. Then are these assumed positions from all bands compared between themselves. If the position is confirmed at least at one nearby band, then is this position marked as true QRS complex. To increase efficiency of designed detector, two modifications were additionally mentioned. The first one, using the envelope of the signal, had rather negative effect on detectors efficiency. The second modification, using combined signal from three pseudoorthogonal leads, had reversely very good effect on detectors efficiency. In the end, the designed detector and all its modifications were tested on signals from CSE library (exactly on leads II, V2 and V6).

The topic of this master's thesis is the analysis of ECG signals using wavelet transform. In the introductory chapters there is a brief description of heart anatomy, the emergence and spread of potentials, which evocating activities of myocardium. There is an overview of techniques used for ECG signals analysis and explanation of ECG curve diagnostic importance. Work also containts an ECG signal analysis common procedure explanation and different approaches brief overview. The main part of this work is an application detecting significant intervals in the ECG signal, developed in Matlab. In several chapters the detection procedure is described in more details and gave reasons for chosen methods. In the last chapter there is a preview of several signals as a result of developed application, together with evaluation of the tests carried out at the CSE database. Detector sensitivity was quantified over 99,10%.

This thesis deals myopotential denoising of ECG signals with using wavelet transform. There was used wavelet denoising subsequently wiener wavelet filtering. In both cases were found the most suitable coeficients for the best denoising. It is meant mainly settings suitable parameters for ideal filtration setting value of threshold, number of decomposition level, selection of thresholding and type of filter. These parameters are tested on real signals. Denoising is realized in Matlab version R2009b.

This master's thesis deals with electrocardiogram and its distortion, which causes errors, due to which a doctor can make a wrong diagnosis. In the theoretical part electrocardiogram is briefly described, further theory of wavelet transform, introduction to the signal compression and some information about ECG delineation. Methods used for the signal evaluation and therefore determination of the distortion size are described in the main theoretical part. This thesis contains known methods and also a method of own design based on the ECG delineation. Some of the described methods are checked in the practical part. These methods are tested for two different compression algorithms, which cause various distortion. In the final part distortion was tested on the influence on setting the wrong diagnosis.

The master’s thesis is focused on the possibilities of measuring heart rate of ECG signal and its use in therapeutic game of ECG biofeedback. This thesis describes the way of measuring ECG with acquisition unit Biopac and analyzes signal processing for measurement of heart rate – algorithms of QRS detection, HRV analysis. Realisation of therapeutic is designed for applications in Matlab.

The work deals with the wavelet transformation, focusing on wavelet transforms with discrete time (DTWT). The practical part is focused on the implementation of redundant packet DTWT and its use in the filtration of ECG signals. The main part of the work is to design wiener filter that uses redundant packet DTWT, designed to eliminate interference myopotentials of ECG signals. The actual solution is implemented in Matlab. Testing is performed on the library CSE using noise model myopotentials used to noising original signals. For optimum parameters designed filter is used the genetic algorithm (GA). The work is carried out comparing the proposed filter redundant packet DTWT a variant of redundant dyadic DTWT.

The project describes the methods useful for observe changes of heart rate in ECG signal. Heart rate variability become (HRV) the conventionally accepted term to describe variations of NN intervals between consecutive heart beats and generally it is function of instantaneous heart rate or NN interval on time. HRV may be evaluated by time domain or frequency domain measures. In Matlab was developed algorithm, realized like function, which counts HRV parameters from ECG signal series. Analysis in time domain adverts to high correlation between statistic and geometric parameters and similarly with signal HRV. Results of frequency domain analysis shows similarity of power spectral density, which was calculated by two different ways (from interpolated and no interpolated signal HRV). Functionality of developed algorithm was verified on each signal. Project results have signification in progress of analysis ECG signal methods with a view to observe pathological changes in heart rate.