Αντικείμενο της παρούσας διπλωματικής εργασίας είναι η αναφορά των επιπτώσεων που προκαλούν οι κεραυνοί σε διατάξεις χαμηλής τάσης και o τρόπος, με τον οποίο ο άνθρωπος μπορεί να προστατέψει μια κατασκευή. Ώς μοντέλο, για να διαπιστωθεί αν η θεωρία μπορεί να γίνει πράξη, χρησιμοποιήθηκε ένα υπάρχον κτιριακό συγκρότημα που βρίσκεται σε περιοχή της Κύπρου, όπου κατά τη διάρκεια κεραυνικών πληγμάτων σημειώνονταν ηλεκτρολογικές ζημιές. Η μελέτη έγινε σύμφωνα με τους ισχύοντες διεθνείς κανονισμούς αντικεραυνικής προστασίας και τη σχετική βιβλιογραφική θεωρία. Μετά τη μελέτη και τον υπολογισμό όλων των υπολοίπων τμημάτων που απαρτίζουν το σύστημα αντικεραυνικής προστασίας ακολουθεί η σχεδίαση του στο πρόγραμμα σχεδίασης AutoCAD. Τέλος, με εξομοίωση του ισοδύναμου κυκλώματος, του ΣΑΠ, στο λογισμικό πρόγραμμα EMTP-ATP, μελετάται η μεταβατική συμπεριφορά του συστήματος γείωσης για να κριθεί αν το σύστημα που σχεδιάστηκε είναι αποτελεσματικό ή όχι. Το προτεινόμενο σύστημα αντικεραυνικής προστασίας όπως παρουσιάζεται στην πιο κάτω διπλωματική εργασία σύμφωνα με τα αποτελέσματα, μπορεί να παρέχει μια αξιόπιστη και ασφαλή λειτουργία του κτιριακού συγκροτήματος χωρίς περαιτέρω ζημιές. / The main subject of this thesis is the study and designing of a lighting strike protection system in an existing building complex. In addition, the consequences of lighting strikes in buildings are studied and what someone can do to protect buildings. In order to apply the theory in practice, an existing building complex located in Cyprus, is used as a model in order to design the lighting protection system, since damages were observed during several lighting strikes the last few years. The study and the design of the protection system is made by following the national lighting strike protection rules and theory presented in existing literature. The study and calculations of the other parts that belong to the complete lighting strike protection system are followed by the designing of the complete system in Autocad. Moreover, a study of the transient behaviour of the Earth-termination system is done via the simulation of the building complex by using the EMTP-ATP software. It is important to mention that the phenomenon of ionization is consider as well in this step. The proposed lighting protection system as it is presented in this thesis and according to the results, can provide a reliable and safe operation of the building complex without any further damages.

Orientador: Jose Roberto Sanches Mantovani / Banca: Luiz Fernando Bovolato / Banca: Rodrigo Aparecido Fernandes Pereira / Resumo: Neste trabalho apresenta-se uma metodologia para obter um ambiente interativo de simulação com ferramentas que permitam fazer análises de sistemas de proteção como estudos de coordenação e analises pós falta. As ferramentas estão baseadas no programa de simulação de transitórios eletro- magnéticos EMTP/ATP e na linguagem de programação ANSI C, sobre a plataforma de software livre GNU/Linux. Esta metodologia pode ser implementada, da mesma forma, em qualquer plataforma Windows sobre a qual possa funcionar o EMTP/ATP e o pacote ATP/MingW. Assim, implementou- se um relé de distância numérico através de modelos externos ("foreign models"). Ilustra-se também como usar arquivos no formato COMTRADE na análise com EMTP/ATP. Dessa forma foi possível analisar o comportamento do relé implementado tendo como entradas os sinais de tensões e correntes correspondentes aos eventos reais. Os sinais de disparo, assim como os demais componentes do relé, foram testados usando um sistema teste de referência do Power System Relaying Committee da PES-IEEE e os sinais de faltas reais do Sistema Elétrico Interligado da Colômbia. Por fim, foi feito um estudo de coordenação. Os resultados são apresentados e discutidos. A metodologia proposta pode ser usada para desenvolver qualquer componente ou elemento de controle dentro de um sistema elétrico, onde haja a necessidade de usar o EMTP/ATP para simular condições específicas de operação do sistema elétrico, complementando a simplicidade da linguagem MODELS com a portabilidade e potencialidade da linguagem C / Abstract: This work presents the methodology to obtain an environment of interactive simulation with tools to perform analysis of protection systems, coordination studies and analysis post fault. These tools are based on the program for electromagnetic transients EMTP/ATP and in ANSI C programming language used in the free GNU/Linux software platform. The same methodology can be followed to be used on any Windows Operating System that can run EMTP/ATP and the package ATP/MingW. Then, for this, a numerical distance relay was implemented by means of foreign models using C programming language. It also shows how to use COMTRADE files in analysis with EMTP / ATP. Thus it was possible to analyze the behavior of the implemented relay with voltage and current signals of real events as inputs. The trip signals, like the other components of the relay, were tested using a testing reference system of Power System Relaying Committee of PES-IEEE and the signals of real faults of Inter- connected Electric System of Colombia. Finally, a coordination study was made. The results are presented and discussed. This methodology could also be used to develop any component or control element within an electrical system that one may need for a particular use; therefore, compensating the simplicity of the language MODELS with the flexibility and portability of C programming language / Mestre

Made available in DSpace on 2014-06-11T19:22:33Z (GMT). No. of bitstreams: 0 Previous issue date: 2011-02-18Bitstream added on 2014-06-13T19:08:07Z : No. of bitstreams: 1 fabianespinoza_rg_me_ilha.pdf: 869619 bytes, checksum: 3c82572569bc2349669cb3765fb65c95 (MD5) / Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES) / Fundação de Ensino Pesquisa e Extensão de Ilha Solteira (FEPISA) / Neste trabalho apresenta-se uma metodologia para obter um ambiente interativo de simulação com ferramentas que permitam fazer análises de sistemas de proteção como estudos de coordenação e analises pós falta. As ferramentas estão baseadas no programa de simulação de transitórios eletro- magnéticos EMTP/ATP e na linguagem de programação ANSI C, sobre a plataforma de software livre GNU/Linux. Esta metodologia pode ser implementada, da mesma forma, em qualquer plataforma Windows sobre a qual possa funcionar o EMTP/ATP e o pacote ATP/MingW. Assim, implementou- se um relé de distância numérico através de modelos externos (“foreign models”). Ilustra-se também como usar arquivos no formato COMTRADE na análise com EMTP/ATP. Dessa forma foi possível analisar o comportamento do relé implementado tendo como entradas os sinais de tensões e correntes correspondentes aos eventos reais. Os sinais de disparo, assim como os demais componentes do relé, foram testados usando um sistema teste de referência do Power System Relaying Committee da PES-IEEE e os sinais de faltas reais do Sistema Elétrico Interligado da Colômbia. Por fim, foi feito um estudo de coordenação. Os resultados são apresentados e discutidos. A metodologia proposta pode ser usada para desenvolver qualquer componente ou elemento de controle dentro de um sistema elétrico, onde haja a necessidade de usar o EMTP/ATP para simular condições específicas de operação do sistema elétrico, complementando a simplicidade da linguagem MODELS com a portabilidade e potencialidade da linguagem C / This work presents the methodology to obtain an environment of interactive simulation with tools to perform analysis of protection systems, coordination studies and analysis post fault. These tools are based on the program for electromagnetic transients EMTP/ATP and in ANSI C programming language used in the free GNU/Linux software platform. The same methodology can be followed to be used on any Windows Operating System that can run EMTP/ATP and the package ATP/MingW. Then, for this, a numerical distance relay was implemented by means of foreign models using C programming language. It also shows how to use COMTRADE files in analysis with EMTP / ATP. Thus it was possible to analyze the behavior of the implemented relay with voltage and current signals of real events as inputs. The trip signals, like the other components of the relay, were tested using a testing reference system of Power System Relaying Committee of PES-IEEE and the signals of real faults of Inter- connected Electric System of Colombia. Finally, a coordination study was made. The results are presented and discussed. This methodology could also be used to develop any component or control element within an electrical system that one may need for a particular use; therefore, compensating the simplicity of the language MODELS with the flexibility and portability of C programming language