The velocity structures of southern and central part of Sweden have been derived with the local tomography (LET) method. The region has been divided into two study areas and the datasets come from the P- and S-wave traveltimes recorded by the Swedish National Seismic Network (SNSN). Man-made explosions and earthquakes occurring over the period of 5 years and 10 years, respectively, within the study areas have been used. One-dimensional starting models were derived based on an a priori model obtained from the SNSN, that were later used for starting models in the inversion for the 3-D crustal structures of the study areas. Attempts were also made to invert for Moho topography in the areas. The study areas are found to have an upper-crustal thickness of approximately 20 to 25 km and the Moho boundaries vary from 42 to 46 km in depth. The Vp/Vs ratios varies from about 1.68 to 1.78. The LET method appear to resolve the different between the Sveconorgwegian and Svecofennian orogen regions, but the stations and sources are too sparsely distributed for higher resolution models. The seismicity in the study areas are distributed in two distinctive depth ranges. The focal depth of the SNSN catalogued earthquakes concentrated in approximately 5 km and 15 - 20 km depth. Relocations of the earthquakes using a global search method reduced this tendency. The results also show that using 3-D models produces less biased results than using 1-D models with the same relocation method.

A new high-resolution 3-dimensional P-wave velocity model for Mt. Pinatubo volcano was developed by tomographic inversion of P-wave arrivals from 3,007 earthquakes recorded during a four month period from May to August, 1991. The arrivals were recorded by a network of seismic stations, consisting of seven pre-eruption stations and seven post-eruption stations. Two stations survived the June eruptions. First-arrival travel times were calculated using a finite-difference solution to the eikonal equation. An iterative, linearized approximation of the nonlinear tomography problem was used to solve separately for both velocity structure and hypocenter locations. Several inversions performed with different initial parameters and convergence schemes, and synthetic checkerboard reconstructions indicate a horizontal spatial resolution of velocity perturbations near 4 km. However, the network sparseness allows for a substantial trade-off between focal depth, origin time, and the vertical velocity profile. Many hypocenter clusters collapse from diffuse clouds into tighter features after 3-D relocation. These bands of earthquakes appear to represent fault-related structures. Three low-velocity (relative to the horizontal average) anomalies exist within the well-resolved portion of the velocity model. These anomalies are spatially associated with pre- and post-eruption earthquakes oriented along mapped surface fault zones. Similar anomalies observed at different volcanoes have been previously interpreted as magma related. The low-velocity anomalies at Pinatubo are interpreted as highly fractured, hot volumes of mostly competent rock, which may contain partial melt. / Master of Science

Induced seismicity is a common phenomenon that occurs as soon as the stress state in the subsurface is externally altered in a way that faults are destabilized. It is especially problematic in stable tectonic regions where the area is not used to earthquakes; the infrastructure is not built to withstand ground movement and thus when the induced seismicity occurs damage can follow. In this thesis, mining-induced seismicity has been studied at the Dannemora mine, located in central Sweden, with the aim to locate the seismicity and gain understanding of its occurrence and behavior. The mining company, Dannemora Mineral AB, provided with blasting locations and times, as well as maps over the mine's orebodies and stopes. Seismic data acquired between 01 July 2014 - 25 March 2015 from 4 temporary seismic stations, deployed in the summer of 2014 surrounding the mine, along with 8 SNSN stations was analyzed. The project encompassed field work and processing of the data, which involved different methods to investigate the characteristics of the mine's seismicity: Statistics were kept to record the activity rate of the seismicity over time; spectral analysis was used to study the frequency content of the seismicity; particle motion plots were constructed to identify body-phases in the seismicity; Local Earthquake Tomography was used to upgrade the velocity model of the mine and to relocate the induced seismicity with more accuracy; cross-correlation was used to find events originating from similar sources; and finally, magnitude analysis was used to compare the different types of seismicity within the mine. Three main types of induced events were observed in the mine: low-frequency events with clear first arrivals, emergent events with long duration, and high-frequency events that could either have clear first arrivals or emergent-like with long durations. Through the analysis of their characteristics, they were linked to different types of rockbursts. The low-frequency events were linked to both reactivation of fault zones triggered by the mine activity, and rockbursts within the mine directly related to the mining. The emergent and high-frequency events were also linked to rockbursts directly related to the mine activity, e.g. ejection of rock from the tunnel walls or arch collapses in stopes.

La sismicité sous la mer Tyrrhénienne méridionale et le sud de l'Italie est essentiellement attribuée à la subduction de la lithosphère océanique Ionienne qui s'enfonce dans le manteau Tyrrhénien jusqu'à 500 km de profondeur. Les tomographies proposées à ce jour n'ont pas une résolution suffisante pour distinguer les différentes structures géologiques à grande profondeur, laissant donc encore de nombreuses questions ouvertes concernant la géodynamique régionale. Dans ce travail on a en développé des aspects méthodologiques qui mettent en œuvre une nouvelle technique de post-processing appelée WAM (Weighted Average Model). Cette méthode nous a permis d' obtenir des modèles de vitesse à haute résolution de la région sud Tyrrhénienne en réalisant une tomographie sismique 3D des ondes P et S. Avec WAM on a ainsi pu reconstruire la géométrie 3D du slab Ionien et proposer un nouveau scenario géodynamique pour la région basé sur de considérations pétrologiques.

[Truncated abstract] A number of controlled and natural seismic sources are utilised to model the Pwave velocity structure of the southwest of the Yilgarn Craton, Western Australia. The Yilgarn Craton is one of the largest pieces of Archaean crust in the world and is known for its gold and nickel deposits in the east and intraplate seismicity in the west. The aim of the project is to link 2D and 3D models of variations in seismic velocity with the local seismicity and geology. A new set of seismic refraction data, acquired in 25 overlapping deployments between 2002 and 2005, has been processed, picked and analysed using forward modelling. The data comprise two perpendicular traverses of three-component recordings of various delay-fired blasts from local commercial quarries. The data were processed using a variety of techniques. Tests were carried out on a number of data enhancement and picking procedures in order to determine the best method for enhancement of delay-fired data. A new method for automatic phase recognition is presented, where the maximum of the derivative of the rectilinearity of a trace is taken as the first break. Complete shot gathers with first break picks for each seismic source are compiled from the overlapping deployments. ... The starting 3D model was based on the models produced by 2D forward modelling. 14 iterations were carried out and the best-fit 3D model was achieved at the 10th iteration. It is 35% better then the current model used to locate earthquakes in this region. The resultant velocity block model was used to iii construct a density block model. A relative gravity map of the southwest of Yilgarn Craton was made. The results of 2D forward modelling, 3D tomography and forward gravity modelling have been compared and it was found that the HVZ is present in all models. Such a zone has been previously seen on a single seismic refraction profile, but it is the first time, this zone has been mapped in 3D. The gravity high produced by the zone coincides with the gravity high observed in reality. There is strong evidence that suggests that the HVZ forms part of the Archaean terrane boundary within the Yilgarn Craton. The distribution of the local seismicity was then discussed in the framework of the new 3D velocity model. A hypothesis, that the primary control on the seismicity in the study area is rotation of the major horizontal stress orientation, is presented. It is also argued that the secondary control on seismicity in the SWSZ is accommodation of movements along major faults.