This thesis deals with the design grate boilers with natural circulation for the combustion of contaminated biomass. The boiler output is output 45 t/h. Produced superheated steam with the output parameters of 440 °C 4,2 at MPa feed water temperature 115 °C. The stoichiometric calculations and the thermal calculation are based on the specified fuel composition. Thanks to this, the basic dimensional design of the boiler and its efficiency are determined. Calculation of this work focuses mainly on thermal calculations and dimensional design of individual heat transfer surfaces. Basic drawing of the boiler is available in the attachment of the thesis.

For set parameters of a steam and a boiler feed water is designed a thermal and dimensional plan of the boiler, allowing high efficient requests. A boiler is used for combustion of blast furnace gas contains 10% of a natural gas used as a stabilisation element.

This thesis deals with the change of the fuel base of a coal boiler due to the reduction of CO2 emissions and its thermal recalculation. In the first part, there is implemented calculation of the combusting chamber. This is followed by the recalculation of the heat transfer surfaces. The emphasis is placed on the preservation of the exsiting steam parametrs.

This diploma thesis deals with a design of a boiler for stillage combustion. Stoichiometric calculations and enthalpies of combustion gases have been calculated from the specified parameters. In addition, heat calculation, design of the combustion chamber dimensions and dimensioning of heat surfaces were accomplished. The boiler has an evaporator with natural circulation and a fire grate.

This diploma thesis deals constructional and calculation design of the steam boiler 60t/h of clean burning wood. For the parameters of the stoichiometric calculations are carried out and enthalpy calculations of combustion and air. The collected data is then made It a diagram of air and flue gas. The following are the calculations with the heat balance calculations of losses and determination of the boiler thermal efficiency of the boiler. It is made of the combustion chamber design and its thermal calculation. After determining the main dimensions of the combustion chamber moves continue the calculation of boiler heating surfaces. At the end of the calculations are controlling the overall energy balance. Boiler output parameters as temperature, pressure and quantity of the steam.

An objective of this thesis is to design a grate steam boiler for burning straw. Generated steam will be used for technological purposes or cogeneration. Calculations of the heat comes from engaged temperature and pressure of the overheated steam and characteristics of characteristics of the biomass as well.

This diploma thesis deals with a design of steam boiler used to incineration of mixed municipal waste. Based on the specified fuel and the required output parameters of the steam from a steam boiler is calculated stoichiometry of incineration, thermal losses and overall boiler efficiency. Other chapters of thesis are focused on construction and thermal calculation of boiler moves. Finally, this thesis is to check heat balance of the boiler.

Steam boiler for wood burning 50t/h In this diploma thesis I will deal design of the steam grate boiler 50t/h of burning clean wood. For the specified parameters make a stoichiometric calculations and calculate the enthalpy of the air and combustion. I shall calculate the heat balance, losses of boiler and thermal efficiency of the boiler. The following section make a design of the combustion chamber and its thermal calculation. After determining the dimensions of the combustion chamber further continue by calculating boiler moves and heating surfaces. Finally check the overall heat balance.

The purpose of this Diploma Thesis is the construction design of the steam-boiler for the combustion of biomass – wood pellets. For the specified parameters have been defined stoichiometric calculations and calculations enthalpy burnt gas. In sequence, there is designed and solved the configuraion of the steam-boiler, so that the result design and the number of the heat-delivery surfaces can be determined, in dependence on the required inlet parametres of the air and outlet parametresof the water vapour. These parametres mean the amount, the temparature and the pressure. The aim of the thesis is to make a design of the steam.boiler burning biomass according to the set parametres. This very ecological fuel can really substitute the fossil fuel and friendly respect the environment.

The aim of this thesis is design a grate steam boiler for burning straw with an output of 10 tons of steam per hour. The produceds team has parameters 320 °C, 3,2 MPa. For a given fuel (fytomass) is calculated stoichiometric calculation. The following is the calculation of the heat balance of the boiler including the determinativ of thermal efficiency. The fuel used, the required parameters of steam and feed water temperature are designed individual convective surfaces and dimensions of the boiler. The boiler design includes drawings.