Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Consultant: Mgr. Pavel Ondrejček, Ph.D. Student: Simona Berková Title of Thesis: The evaluation of compressibility of the mixtures pellets and microcrystalline cellulose This thesis is focused on the evaluation of powdered microcrystalline cellulose, pellets and mixtures thereof. Comprecel 102 was used as powdered microcrystalline cellulose. The used pellets were commercially available pellets Cellets 100 made of microcrystalline cellulose. The flow properties of used materials and their mixtures were evaluated by using the angle of repose, flow through orifice and Hausner ratio methods. Further the compressibility was evaluated using the force-displacement record. For the evaluation of compaction proces the three exponential compaction was used. Finally the radial tablet strength and tablet friability was tested. The results showed, that the flow properties improved with an increasing amount of pellets in mixture. I tis due to higher bulk and tapped density and also narrower particle size distribution, smoother surface and the regular shape of used pellets. The parameters of the force-displacement method showed different compressibility of used tabletting mixtures. The evaluation of...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of: Pharmaceutical technology Consultant: Mgr. Petra Svačinová, Ph.D. Student: Michaela Přeučilová Title of Thesis: A comparison of viscoelastic properties of mixtures of lactose and different lubricants using the stress relaxation test This diploma thesis deals with viscoelastic properties of pharmaceutical excipients and tensile strength of tablets made of these excipients. Theoretical part is dedicated to description of lactose and lubricants, further the tablets compressibility and compression energy profile are described. The end of theoretical part deals with the stress relaxation test, with evaluation methods and the stress relaxation test influence on lactose tablets with different types of lubricants as well. The experimental part deals with the evaluation of the viscoelastic properties of two types of lactose and their mixtures with different types of lubricants at concentration of 1%. These characteristics were evaluated by stress relaxation test. All tablets were compressed by compression forces of 13 kN and 15 kN with dwell time 180 seconds. The study was about differences between two types of lactose, effect of lubricants and effect of two different compression forces on parameters of elasticity A1 -A3 and...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of: Pharmaceutical technology Consultant: Mgr. Petra Svačinová, Ph.D. Student: Straková Markéta Title of Thesis: The influence of dwell time on the parameters of the stress relaxation test for lactose and calcium hydrogen phosphate The aim of this thesis is to find out viscoelastic properties of pharmaceutical excipients and to evaluate the tensile strength of tablets made of them. The theoretical part describes used materials, these are lactose, calcium hydrogen phosphate and magnesium stearate. The thesis also deals with the stress relaxation test, its evaluation and usage. Tensile strength, calculation and various factors that affect tensile strength are described in the text. The experimental part deals with viscoelastic properties of used materials and their mixtures with lubricant using the stress relaxation test. Different dwell times (60 s, 120 s, 180 s, 240 s, 300 s, 360 s, 420 s, 480 s, 540 s, 600 s) were used for individual measurements. The relation between elasticity parameters (A1, A2, A3) and plasticity parameters (P1, P2, P3) depending on the dwell time was investigated. As for calcium hydrogen phosphate, the dwell time 180 - 240 seconds was found as the most appropriate. As for lactose, the optimum dwell...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of Pharmaceutical Technology Consultant: Mgr. Pavel Ondrejček, Ph.D. Student: Žofie Trpělková Title: A study of a compaction process of microcrystalline cellulose pellets This work is aimed at the comparison of two types of microcrystalline cellulose (Comprecel 102 a Avicel PH-200) with two types of pellets made of microcrystalline cellulose (Cellets 100 a Cellets 200). Important properties for the compaction into tablets were analyzed in these materials. The particle size distribution, the content of moisture, the bulk and tapped density, the flowability, the angle of repose and the Hausner ratio were evaluated. Furthermore, the compaction process was described by using the force displacement method and the three-exponential equation. Finally, the radial strength and the friability of tablets prepared by using two different compaction forces were evaluated. The results proved that both types of pellets have much better flow properties than powdered microcrystalline celluloses. This is primarily caused by the narrow particle size distribution, higher bulk and tapped density and the significantly smoother surface of pellets. Better flow properties of the pellets also influenced the parameters of the force-displacement...

Charles University in Prague, Faculty of Pharmacy in Hradec Králové Department of: Pharmaceutical technology Consultant: Mgr. Svačinová Petra, Ph.D. Student: Hamplová Kateřina Title of Thesis: The influence of the dwell time on the parameters of the stress relaxation test for microcrystalline cellulose and starch. This thesis is focused on the viscoelastic properties of pharmaceutical excipients and the tensile strength of tablets. The theoretical part describes used materials. Microcrystalline cellulose and starch were used as fillers and magnesium stearate at concentration of 1% was used as lubricant. The stress relaxation test and its evaluation and utilization not only in pharmacy is described as well as the tensile strength of tablets. The experimental part deals with the viscoelastic properties of used materials and their mixtures with lubricant. These properties were evaluated using the stress relaxation test. At maximum compression force of 10 kN the length of dwell time was changed (60 s, 120 s, 180 s, 240 s, 300 s, 360 s, 420 s, 480 s, 540 s, 600 s). For derived parameters of elasticity A1-3 and plasticity P1-3 the dependence on the length of dwell time was evaluated. Parameter A1 increases with increasing dwell time for all substances. For parameters A2, A3, the dependence on the dwell...