This research validates electro-disinfection as a potential secondary ballast water treatment technology. Electricity applied to bacteria laden water produced bactericidal effects, reactive oxygen species and chlorine generation which annihilated bacteria. Evaluation of electro-disinfection experiments showed titanium electrodes had the maximum kill efficacy while disinfection with aluminum and stainless steel electrodes had lesser kill efficacy. A continuous flow electro-disinfection reactor was evaluated utilizing artificial brackish and fresh ballast water. Brackish water had a 100% bacteria kill efficiency utilizing titanium electrodes at a current density of 10 mA/cm2. Fresh water was augmented with the addition of salt to increase its electrical conductivity from 232 μS/cm to 873 μS/cm to ascertain 100% bacteria kill efficiency with titanium electrodes and a current density of 9.8 mA/cm2.

Wastewater treatment has always been a problem to human settlers. Events such as the great stink of London during the summer of 1858 have pushed engineers into developing new technologies to deal with such wastes in effective and safe ways. Research projects like this aim to find ways of improving performance, economics, or environmental friendliness of treatment and disinfection methods. This thesis deals with the effectiveness, mechanisms of action, by-products and side effects of using DC current to disinfect secondary effluent. It is proposed as an alternative to conventional methods, such as chlorination, which are not always environmentally friendly or feasible. It was demonstrated that DC current efficiently kills pathogens. DC properly used achieves disinfection significantly higher than the minimum required by the EPA. Nevertheless disinfection by products such as residual chlorine should be taken into account when considering this technology as an alternative to conventional chlorination.