With the world’s increasing energy demand and the depletion of fossil fuels, there is a growing demand for the development of alternative and clean energy sources. Batteries and fuel cell technologies have been cited as next generation technologies to provide sustainable energy; however, these technologies are insufficient in supplying high power in short time periods that can be produced by oil as an energy source. In contrast, electrochemical capacitors possess fast charging/discharging capabilities with high power output. As a result, the use of electrochemical capacitors in commercial applications has generated strong interest. Examples of commercial applications include emergency back-up power, consumer electronics, and hybrid vehicles. Commercially available electrochemical capacitors are based on carbonaceous materials with high surface area, excellent electrical conductivity, and wettability which statically store the charges in pores. In contrast, pseudocapacitive materials, namely transition metals, utilize fast reversible faradaic reactions on the surface of the materials which allow for greater energy storage than carbonaceous materials. Currently, many research activities are being focused on pseudocapacitive materials in an effort to enhance their energy storage capabilities. This thesis presents research on a pseudocapacitive material: nickel hydroxide/oxide hybrid. Also, it identifies the hybrid material’s lack of conductivity which can negatively impact its capacitive performance. An addition of carbon supports is recommended to enhance the conductivity. There are two parts to this study. The first study addresses the synthesis of the nickel hybrid structures through solvothermal process and calcination. The materials are thoroughly analyzed through physical and electrochemical characterizations. The issue of using the hybrid material as pseudocapacitor electrodes are identified at this stage. The second part of the study addresses the effect of different carbon additives in the nickel hybrid material. Commonly known carbon additives are incorporated into the nickel hybrid material and analyzed through electrochemical characterization to distinguish the best carbon support for the nickel hydroxide/oxide.

This thesis describes the development of an electroanalytical technique for the estimation of compounds of biochemical interest. The technique involves titration with hypobromite using double electrode systems - the rotating ring disc electrode (RRDE) and the flow-through tubular double electrode (TDE). Hypobromite is continuously electregenerated at the upstream disc (generator) electrode and is transported by convection and diffusion to the downstream ring (detector) electrode where it is detected amperometrically. The presence of a reactive substrate in solution decreases the amount of titrant which reaches the ring, and from measurements of the generating and detecting currents the bulk concentration of substrate may be estimated. At pH 9.2 the amine group of amino acids reacts with two hypobromite molecules and some side chains (e.g. cystinyl, tyrosinyl, tryptophanyl) will also react. The reactivity of these side chains permits the titration of proteins. The titration response may be described theoretically which enables the calculation of the number of hypobromite molecules which react with one protein molecule ( ~500 for haemoglobin). With this chemical amplification the detection limit of the technique is ~10^-8 g ml^-1 for proteins and ~10^-8 M for amino acids. An electronic circuit has been developed which enables the detector electrode to control the rate at which titrant is generated. This autotitrator produces a generator current which is proportional to substrate concentration, and with the TDE should enable the continuous estimation of proteins as they are eluted from a chromatographic column. Proteins have been titrated at pH 9.2 and pH 5; the ratio of a protein's titration responses reflects its amino acid composition and, when combined with the extinction coefficient, enables the identification of proteins. Patent applications for this method of identification and for the autotitration technique have been submitted.

No description available.

Low-temperature waste heat recovery is an important component of generating a more efficient, cost-effective and environmentally-friendly energy source. To meet this goal, thermo-electrochemical cells (TECs) are cost-effective electrochemical devices that produce a steady electric current under an applied temperature difference between their electrodes. However, current TECs have low conversion efficiencies. On this project, I developed a comprehensive multiscale model that couples the governing equations in TECs. The model was used to understand the fundamental principles and limitations in TECs, and to find the optimum cell thickness, aspect ratio and number of cells in a series stack. Doped multiwall carbon nanotubes (MWCNTs) were then explored as alternative electrodes for TECs. One of the main objectives of this dissertation is to study multiwall carbon nanotube/ionic liquid (MWCNT/IL) mixtures as alternative electrolytes for TECs. Previous authors showed that the addition of carbon nanotubes (CNTs) to a solvent-free IL electrolyte improves the efficiency of dye solar cells by 300%. My research plan involved a spectroscopy analysis of imidazolium-based ionic liquids (IILs) mixed with MWCNTs using impedance spectroscopy and nuclear magnetic resonance. The results show that the combination of interfacial polarization and ion pair dissociation effects reduces mass transfer resistances and enhances the power of TECs at low wt% of MWCNTs. This happens in spite of reduced open circuit voltage due to percolated networks.

No description available.

Thesis (Ph. D.)--Johns Hopkins University, 1934. / Biography. Bibliography: p. 44.

Thesis (Ph.D.)--University of Texas at Dallas, 2008. / Includes vita. Includes bibliographical references (leaves 90-95)

Thesis (M.S.)--Oregon State University, 2010. / Printout. Includes bibliographical references (leaves 95-97). Also available on the World Wide Web.

Thesis (Ph. D.)--Michigan State University. Dept. of Electrical Engineering, 2008. / Title from PDF t.p. (viewed on July 2, 2009) Includes bibliographical references (p. 147-155). Also issued in print.

Thesis (Ph. D.)--University of Pennsylvania.