Spelling suggestions: "subject:"electronic aortal amaging device"" "subject:"electronic aortal amaging crevice""
1 |
Investigation of Advanced Dose Verification Techniques for External Beam Radiation TreatmentAsuni, Ganiyu January 2012 (has links)
Intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) have been introduced in radiation therapy to achieve highly conformal dose distributions around the tumour while minimizing dose to surrounding normal tissues. These techniques have increased the need for comprehensive quality assurance tests, to verify that customized patient treatment plans are accurately delivered during treatment. In vivo dose verification, performed during treatment delivery, confirms that the actual dose delivered is the same as the prescribed dose, helping to reduce treatment delivery errors. In vivo measurements may be accomplished using entrance or exit detectors. The objective of this project is to investigate a novel entrance detector designed for in vivo dose verification.
This thesis is separated into three main investigations, focusing on a prototype entrance transmission detector (TRD) developed by IBA Dosimetry, Germany. First contaminant electrons generated by the TRD in a 6 MV photon beam were investigated using Monte Carlo (MC) simulation. This study demonstrates that modification of the contaminant electron model in the treatment planning system is required for accurate patient dose calculation in buildup regions when using the device. Second, the ability of the TRD to accurately measure dose from IMRT and VMAT was investigated by characterising the spatial resolution of the device. This was accomplished by measuring the point spread function with further validation provided by MC simulation. Comparisons of measured and calculated doses show that the spatial resolution of the TRD allows for measurement of clinical IMRT fields within acceptable tolerance. Finally, a new general research tool was developed to perform MC simulations for VMAT and IMRT treatments, simultaneously tracking dose deposition in both the patient CT geometry and an arbitrary planar detector system, generalized to handle either entrance or exit orientations. It was demonstrated that the tool accurately simulates dose to the patient CT and planar detector geometries. The tool has been made freely available to the medical physics research community to help advance the development of in vivo planar detectors.
In conclusion, this thesis presents several investigations that improve the understanding of a novel entrance detector designed for patient in vivo dosimetry.
|
2 |
Investigation of Advanced Dose Verification Techniques for External Beam Radiation TreatmentAsuni, Ganiyu January 2012 (has links)
Intensity modulated radiation therapy (IMRT) and volumetric modulated arc therapy (VMAT) have been introduced in radiation therapy to achieve highly conformal dose distributions around the tumour while minimizing dose to surrounding normal tissues. These techniques have increased the need for comprehensive quality assurance tests, to verify that customized patient treatment plans are accurately delivered during treatment. In vivo dose verification, performed during treatment delivery, confirms that the actual dose delivered is the same as the prescribed dose, helping to reduce treatment delivery errors. In vivo measurements may be accomplished using entrance or exit detectors. The objective of this project is to investigate a novel entrance detector designed for in vivo dose verification.
This thesis is separated into three main investigations, focusing on a prototype entrance transmission detector (TRD) developed by IBA Dosimetry, Germany. First contaminant electrons generated by the TRD in a 6 MV photon beam were investigated using Monte Carlo (MC) simulation. This study demonstrates that modification of the contaminant electron model in the treatment planning system is required for accurate patient dose calculation in buildup regions when using the device. Second, the ability of the TRD to accurately measure dose from IMRT and VMAT was investigated by characterising the spatial resolution of the device. This was accomplished by measuring the point spread function with further validation provided by MC simulation. Comparisons of measured and calculated doses show that the spatial resolution of the TRD allows for measurement of clinical IMRT fields within acceptable tolerance. Finally, a new general research tool was developed to perform MC simulations for VMAT and IMRT treatments, simultaneously tracking dose deposition in both the patient CT geometry and an arbitrary planar detector system, generalized to handle either entrance or exit orientations. It was demonstrated that the tool accurately simulates dose to the patient CT and planar detector geometries. The tool has been made freely available to the medical physics research community to help advance the development of in vivo planar detectors.
In conclusion, this thesis presents several investigations that improve the understanding of a novel entrance detector designed for patient in vivo dosimetry.
|
3 |
Commissioning and Implementation of an EPID Based IMRT QA System “Dosimetry Check” for 3D Absolute Dose Measurements and Quantitative Comparisons to MapCheckPatel, Jalpa A. 28 December 2010 (has links)
No description available.
|
4 |
RADIAČNÍ OCHRANA PACIENTŮ PŘI UŽITÍ SVAZKU S MODULOVANOU INTENZITOU (ImRT) {--} DOZIMETRICKÉ OVĚŘOVÁNÍ PLÁNŮ. / RADIATION PROTECTION OF PATIENT WITH USING INTENSITY MODULATED RADIOTHERAPY (ImRT) {--} DOSIMETRIC VERIFICATION OF TREATMENT PLAN.KLEČKOVÁ, Naděžda January 2008 (has links)
Nowadays more and more radiotherapy departments use intensity modulated beams for treatment of patients. Intensity modulated radiotherapy (ImRT) is able to modificate intensity of radiation across the iradiated field. In this way it is posible to achieve better dose conformity than in conventional radiotherapy. Implementation of ImRT allows us to escalate dose to target volume with same side effects of organs at risk as in conventional radiotherapy or to reduce normal tissue complication - decrease dose to organ at risk with the same tumour dose. This fact reguires extension of our guality system to all network of delivery dose to patients, inclusive linear accelerator with multileaf collimator, treatment planning system, electronic portal imaging device and so on. Quality assurance is guaranteed both periodical user tests and independent verification of The State Office for Nuclear Safety. The aim of this work is finding the optimal and effective way for the verification treatment plans, determining criteria for evaluation measured results, proposing summary all aspects of radiation protection patients which are treate ionisation beams with intensity modulated radiotherapy. The optimization one of the principles of radiation protection will be provided by routin verification treatment plans.
|
5 |
The production and detection of optimized low-Z linear accelerator target beams for image guidance in radiotherapyParsons, David, Parsons, David 22 August 2012 (has links)
Recent work has demonstrated improvement of image quality with low atomic number (Z) linear accelerator (linac) targets and energies as low as 3.5 MV compared to a standard 6 MV therapeutic beam. In this work, the incident electron beam energy has been lowered to energies between 1.90 and 2.35 MeV. The improvement of megavoltage planar image quality with the use of carbon and aluminum linac targets has been assessed compared to a standard 6 MV therapeutic beam.
Common electronic portal imaging devices contain a 1.0 mm copper conversion plate to increase detection efficiency of a therapeutic megavoltage spectrum. When used in imaging with a photon beam generated with a low-Z target, the conversion plate attenuates a substantial proportion of photons in the diagnostic range, thereby reducing the achievable image quality. Image quality as a function of copper plate thickness has been assessed for planar imaging and cone beam computed tomography.
|
Page generated in 0.1403 seconds