Spelling suggestions: "subject:"6electronic dissertations."" "subject:"belectronic dissertations.""
1021 |
Solutions to dynamic facility layout problems: Development of Dynamic From Between Chart (DFBC) and its applications to continuous layout modeling /Nayak, Chandan N. Krishnan, Krishna January 2007 (has links)
Thesis (Ph.D.)--Wichita State University, College of Engineering, Dept. of Industrial and Manufacturing Engineering / "December 2007."
|
1022 |
Voice network for aviation data networks /Bhatia, Anuj. Pendse, Ravindra January 2007 (has links)
Thesis (M.S): Wichita State University, College of Engineering, Dept. of Electrical and Computer Engineering / "July 2007."
|
1023 |
Assessment of exercise capacity in an individual with LVAD explanation without heart transplantation /Amick, Ryan Zackary. Rogers, Michael January 2007 (has links)
Thesis (M.Ed)-- Wichita State University, College of Education, Dept. of Kinesiology and Sport Studies / "August 2007."
|
1024 |
Alternate encryption scheme for real time traffic /Gopalakrishnan, Gopinath. Pendse, Ravindra January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineering / "July 2007."
|
1025 |
Statistical comparison of customized and traditional knee implants using Finite Element Analyses /Hashmi, Atta- Weheba, Gamal January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Industrial and Manufacturing Engineering / "July 2007."
|
1026 |
Analysis of delamination in drilling of circular plate composite materials with a multi-facet drill bit /Kolhar, Arvind Shrikant. Bahr, Behnam January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Mechanical Engineering / Delamination is recognized as one of the most critical defects that can result from the machining of composites. Delamination has been a major form of failure in drilled composite materials due to the composite⁰́₉s lack of strength in the direction of drilling, which results in poor surface finish, reduction in bearing strength, reduction in structural integrity, and ultimately poor performance of the composite. Delamination due to drilling has been a major research interest for many years, and a considerable amount of work has been done to reduce it. This thesis work involved deriving a formula to determine what applied thrust force would cause delamination in a particular drill bit, the multi-facet drill bit. To achieve that goal, a formula was developed. The conditions and the drill bit used were altered. The thrust force at which delamination occurred was dependent on the thickness and the composition of the material being used. Experimental validation of the physical model involved calculating the thrust force that would cause delamination, using the formula, and drilling at the calculated thrust force. The thrust force was applied as a correlation of feed rate and spindle speed.
|
1027 |
A unified approach for finding the stability boundaries of PID controllers for arbitrary order continuous or discrete time plants with time delays /Lee, Taegyu. Watkins, John Michael January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Electrical and Computer Engineering / "July 2007."
|
1028 |
Iterative LDPC CDMA receiver with EM estimation /Mathur, Avinash. Kwon, Hyuck M. January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Electrical and Computer Engineering / "July 2007."
|
1029 |
Facilitating secure multicasting for mobile networks using Trusted Multicast Agents /Mosharraf, Arif. Pendse, Ravindra January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Electrical and Computer Engineering / "July 2007."
|
1030 |
Numerical simulation of pulsatile blood flow across a tilting-disk mechanical heart valve /Nejadmalayeri, Alireza. Hoffmann, Klaus A. January 2007 (has links)
Thesis (M.S.)--Wichita State University, College of Engineering, Dept. of Aerospace Engineering / "July 2007."
|
Page generated in 0.1042 seconds