Spelling suggestions: "subject:"electrostatic doping"" "subject:"lectrostatic doping""
1 |
Development of amperometric biosensor with cyclopentadienylruthenium (II) thiolato schiff base self-assembled monolayer (SAM) on goldTicha, Lawrence Awa January 2007 (has links)
A novel cyclopentadienylruthenium(II) thiolato Schiff base, [Ru(SC6H4NC(H)C6H4OCH2CH2SMe)(&eta / 5-C2H5]2 was synthesized and deposited as a selfassembled monolayer (SAM) on a gold electrode. Effective electronic communication
between the Ru(II) centers and the gold electrode was established by electrostatically cycling the Shiff base-doped gold electrode in 0.1 M NaOH from -200 mV to +600 mV. The SAMmodified gold electrode (Au/SAM) exhibited quasi-reversible electrochemistry. The integrity of this electro-catalytic SAM, with respect to its ability to block and electro-catalyze certain Faradaic processes, was interrogated using Cyclic and Osteryoung Square Wave voltammetric experiments. The formal potential, E0', varied with pH to give a slope of about - 34 mV pH-1. The surface concentration, &Gamma / , of the ruthenium redox centers was found to be 1.591 x 10-11 mol cm-2. By electrostatically doping the Au/SAM/Horseradish peroxidase at an applied potential of +700 mV vs Ag/AgCl, a biosensor was produced for the amperometric analysis of hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide. The electrocatalytic-type biosensors displayed typical Michaelis-Menten kinetics with their limits of detection of 6.45 &mu / M, 6.92 &mu / M and 7.01 &mu / M for hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide respectively.
|
2 |
Development of amperometric biosensor with cyclopentadienylruthenium (II) thiolato schiff base self-assembled monolayer (SAM) on goldTicha, Lawrence Awa January 2007 (has links)
A novel cyclopentadienylruthenium(II) thiolato Schiff base, [Ru(SC6H4NC(H)C6H4OCH2CH2SMe)(&eta / 5-C2H5]2 was synthesized and deposited as a selfassembled monolayer (SAM) on a gold electrode. Effective electronic communication
between the Ru(II) centers and the gold electrode was established by electrostatically cycling the Shiff base-doped gold electrode in 0.1 M NaOH from -200 mV to +600 mV. The SAMmodified gold electrode (Au/SAM) exhibited quasi-reversible electrochemistry. The integrity of this electro-catalytic SAM, with respect to its ability to block and electro-catalyze certain Faradaic processes, was interrogated using Cyclic and Osteryoung Square Wave voltammetric experiments. The formal potential, E0', varied with pH to give a slope of about - 34 mV pH-1. The surface concentration, &Gamma / , of the ruthenium redox centers was found to be 1.591 x 10-11 mol cm-2. By electrostatically doping the Au/SAM/Horseradish peroxidase at an applied potential of +700 mV vs Ag/AgCl, a biosensor was produced for the amperometric analysis of hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide. The electrocatalytic-type biosensors displayed typical Michaelis-Menten kinetics with their limits of detection of 6.45 &mu / M, 6.92 &mu / M and 7.01 &mu / M for hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide respectively.
|
3 |
Development of amperometric biosensor with Cyclopentadienylruthenium(ii) thiolato schiff base selfassembled Monolayer (sam) on goldTicha, Lawrence Awa 11 1900 (has links)
A novel cyclopentadienylruthenium(II) thiolato Schiff base,[Ru(SC6H4NC(H)C6H4OCH2CH2SMe)(η5-C2H5]2 was synthesized and deposited as a selfassembled monolayer (SAM) on a gold electrode. Effective electronic communication between the Ru(II) centers and the gold electrode was established by electrostatically cycling the Shiff base-doped gold electrode in 0.1 M NaOH from -200 mV to +600 mV. The SAMmodified gold electrode (Au/SAM) exhibited quasi-reversible electrochemistry. The integrity of this electro-catalytic SAM, with respect to its ability to block and electro-catalyze certain Faradaic processes, was interrogated using Cyclic and Osteryoung Square Wave voltammetric experiments. The formal potential, E0', varied with pH to give a slope of about - 34 mV pH-1. The surface concentration, Γ, of the ruthenium redox centers was found to be 1.591 x 10-11 mol cm-2. By electrostatically doping the Au/SAM/Horseradish peroxidase at an applied potential of +700 mV vs Ag/AgCl, a biosensor was produced for the amperometric analysis of hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide. The electrocatalytic-type biosensors displayed typical Michaelis-Menten kinetics with their limits of detection of 6.45 μM, 6.92 μM and 7.01 μM for hydrogen peroxide, cumene
hydroperoxide and tert-butylhydroperoxide respectively / Magister Scientiae - MSc
|
4 |
Development of amperometric biosensor with cyclopentadienylruthenium (II) thiolato schiff base self-assembled monolayer (SAM) on goldTicha, Lawrence Awa January 2007 (has links)
Magister Scientiae - MSc / A novel cyclopentadienylruthenium(II) thiolato Schiff base, [Ru(SC6H4NC(H)C6H4OCH2CH2SMe)(η5-C2H5]2 was synthesized and deposited as a selfassembled monolayer (SAM) on a gold electrode. Effective electronic communication between the Ru(II) centers and the gold electrode was established by electrostatically cycling the Shiff base-doped gold electrode in 0.1 M NaOH from -200 mV to +600 mV. The SAMmodified gold electrode (Au/SAM) exhibited quasi-reversible electrochemistry. The integrity of this electro-catalytic SAM, with respect to its ability to block and electro-catalyze certain Faradaic processes, was interrogated using Cyclic and Osteryoung Square Wave voltammetric experiments. The formal potential, E0', varied with pH to give a slope of about - 34 mV pH-1. The surface concentration, Γ, of the ruthenium redox centers was found to be 1.591 x 10-11 mol cm-2. By electrostatically doping the Au/SAM/Horseradish peroxidase at an applied potential of +700 mV vs Ag/AgCl, a biosensor was produced for the amperometric analysis of hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide. The electrocatalytic-type biosensors displayed typical Michaelis-Menten kinetics with their limits of detection of 6.45 M, 6.92 M and 7.01 M for hydrogen peroxide, cumene hydroperoxide and tert-butylhydroperoxide respectively. / South Africa
|
5 |
Development of Carbon Nanotube-based Field-Effect Transistors for Analog High-Frequency ApplicationsHartmann, Martin 04 January 2023 (has links)
The carbon nanotube-based field effect transistor (CNTFET) possesses the potential to overcome limitations of state-of-the-art technologies such as silicon-based complementary metal-oxide-semiconductors. However, the carbon nanotube (CNT) technology is still at its infancy and technology development is still necessary to exploit the CNT properties such as high charge carrier mobility, high current carrying capability, one-dimensional charge transport and their versatile integrability.
Within this work significant progress has been achieved scientifically and technologically in the advance of high frequency (HF) CNTFETs for analog applications. According to simulations by others, a technology flow has been developed based on electron beam lithography for bottom gated HF CNTFETs which outperform state-of the art top gate architectures with respect to their parasitic capacitances.
Moreover, the impact of electrostatic doping on the CNTFETs has been investigated. In particular, the dynamics of water desorption from the CNTFETs and the related reduction of p-type doping was investigated and the different impact of the n-type dopant polyethylenimine onto the channel region and contact region could be separated for the first time. Furthermore, the impact of doped CNT bundles on the device performance has been studied. It could be shown in detail for the first time, that high off-state source-drain leakage currents can be due to bundled semiconducting CNTs and does not necessarily imply the presence of metallic CNTs. The within the framework of this thesis designed and realized HF CNTFETs are operating in the GHz range with cut-off frequencies up to 14 GHz and maximum frequencies of oscillation up to 6 GHz at a channel length of 280 nm. Moreover, the impact of the spacer between the source-/ drain- to the gate electrode on the HF properties of the CNTFETs has been investigated experimentally for the first time. Simulations by others have successfully confirmed that a symmetrical reduction of the source to gate electrode spacer results in an increased device speed. By asymmetrically reducing the source to gate electrode spacer and in parallel increasing the drain-to-gate electrode spacer the device speed can be further enhanced. Moreover, within this work it has been experimentally indicated for the first time that the device properties of HF CNTFETs can be tuned by different device geometries towards either highest linearity or speed.
|
Page generated in 0.1053 seconds