Spelling suggestions: "subject:"electrostatic lenses."" "subject:"lectrostatic lenses.""
1 |
Chromatic aberration of three-cylinder electrostatic lensesOlson, David Fred, 1959- January 1988 (has links)
Accurate calculations of the axial chromatic aberration coefficients of geometrically symmetric three-cylinder tripotential electrostatic lenses are presented for two different center electrode lengths. This is an extension of the first-order properties and the third-order spherical aberration coefficients published by Harting and Read.
|
2 |
A theoretical and experimental study of the three-ring electrostatic electron lensSommer, Thomas Anthony 01 January 1990 (has links)
A theoretical and experimental study of the three-ring electrostatic lens is presented. The lens consists of three isolated ring-shaped conductors, equally spaced along a common axis of symmetry. When appropriate potentials are applied to the conductors an electric field is produced near the axis which is capable of focusing a collimated beam of electrons. In the theoretical study the charge density method is used to find a closed-form solution for the field. This method approximates the field by replacing each ring with an infinitely thin hoop of uniform charge. The radial and axial equations of motion are then solved numerically, and the paraxial values of focal length, focal distance and their second order aberrations are found. In the experimental study these focal quantities are determined by a ray tracing method that uses two grids placed in the beam path outside the field of the lens. One grid is placed in front of the lens while the other is placed behind it. The shadow pattern cast by the grids is then analyzed to find the focal properties. This method, which is independent of the type of lens being investigated, is also used on a plano-convex glass lens. Comparison of the experimental and theoretical results shows satisfactory agreement in both cases.
|
3 |
Charged particle beam modulation using an electrostatic lens systemFoley, John Edward, 1940- January 1966 (has links)
No description available.
|
4 |
Reconstruction of electrodes and pole pieces from randomly generated axial potential distributions of electron and ion optical systemsSarfaraz, Mohamad Ali, 1960- January 1988 (has links)
The purpose of this investigation is to examine synthesis for reconstruction of electrostatic lenses having an axial potential distribution four times continuously differentiable. The solution of the electrode and pole piece reconstruction is given. Spline functions are used to approximate a continuous function to fit a curve. The present method of synthesis is based on cubic spline functions, which have only two simultaneous continuous derivatives, and all the other higher derivatives are ignored. The fifth-order or quintic spline is introduced simply because it has four simultaneous continuous derivatives. So the reconstruction program would have three terms appearing in the series expansion of the off-axis potential distribution, with regard to two terms when using cubic functions.
|
5 |
Diamond turning of contact lens polymersLiman, Muhammad Mukhtar January 2017 (has links)
Contact lens production requires high accuracy and good surface integrity. Surface roughness is generally used to measure the index quality of a turning process. It has been an important response because it has direct influence toward the part performance and the production cost. Hence, choosing optimal cutting parameters will not only improve the quality measure but also the productivity. In this study, an ONSI-56 (Onsifocon A) contact lens buttons were used to investigate the triboelectric phenomena and the effects of turning parameters on surface finish of the lens materials. ONSI-56 specimens are machined by Precitech Nanoform Ultra-grind 250 precision machine and the roughness values of the diamond turned surfaces are measured by Taylor Hopson PGI Profilometer. Electrostatics values were measured using electrostatic voltmeter. An artificial neural network (ANN) and response surface (RS) model were developed to predict surface roughness and electrostatic discharge (ESD) on the turned ONSI-56. In the development of predictive models, turning parameters of cutting speed, feed rate and depth of cut were considered as model variables. The required data for predictive models were obtained by conducting a series of turning test and measuring the surface roughness and ESD data. Good agreement is observed between the predictive models results and the experimental measurements. The ANN and RSM models for ONSI-56 are compared with each other using mean absolute percentage error (MAPE) for accuracy and computational cost.
|
Page generated in 0.111 seconds