The design of biocompatible synthetic surfaces is an important issue for medical applications. Surface modification techniques provide good approaches to control the interactions between living systems and implanted materials by modifying the surface characteristics. This thesis work demonstrates the feasibility and effectiveness of the novel and low-cost electrostatic self-assembly (ESA) technique for the manufacturing of biocompatible thin film coatings. The ESA process is based on the alternating adsorption of molecular layers of oppositely charged polymers/nanoparticles, and can be applied in the fabrication of well-organized multilayer thin films possessing various biocompatible properties. ESA multilayer assemblies incorporating various biomaterials including metal oxides and polymers were fabricated, the uniformity, thickness, layer-by-layer linearity, and surface morphology of the films were characterized by UV/vis spectroscopy, ellipsometry, and AFM imaging. Preliminary biocompatibility testing was conducted, concentrating on contact angle surface characterization and the in vitro measurements of protein adsorption. The use of Fourier Transform Infrared Reflection-Absorption Spectroscopy (FT-IRAS) for the investigation of the protein adsorption behavior upon the ESA multilayer films is presented. / Master of Science

Stent is one of the coronary angioplasty techniques that expands the narrowed coronary arteries due to the accumulation of fat, cholesterol and other substances in the lumen of the arteries. The major complication of stent is restenosis. Current development of drug-eluting stents shows successfully reduce the occurrence of restenosis. Other than using drugs, electrostatic self assembled (ESAd) thin films may be the potential candidates to prevent restenosis. ESA is a process to fabricate thin films bases on the electrostatic attraction between two oppositely charges. We used this technique to fabricate four PVP films and four PEI films. All films were examined by XPS and AFM. XPS data showed our coatings were successfully fabricated on substrates. AFM images revealed PVP coating was uniform, but PEI coatings had different morphologies due to diffusion and pH during the process. Three preliminary hemocompatibility testes were performed to evaluate the hemocompatibility of the coatings. Platelet adhesion study showed the thin films inhibited platelet adhesion. All thin films were able to inhibit coagulation and were less cytotoxic. The studies suggested the ESA films were potentially hemocompatible. / Master of Science

The Electrostatic Self-Assembly (ESA) technique possesses great advantages over traditional thin film fabrication methods, making it an excellent choice for a number of applications in the fields of linear and nonlinear optics, electronics, sensing and surface coatings. The feasibility of fabricating linear optical interference filters by ESA methods is demonstrated in this thesis work. Basic single-anion/single-cation ESA films are synthesized and their optical parameters -- refractive index and average thickness for individual bilayer -- are investigated to provide a basis for the in-depth design of optical filters. High performance dielectric stack filters and narrowband and wideband antireflection coatings are designed using TFCalc simulation software and are fabricated by ESA. Both bulk film sensitivity and layer sensitivity to manufacturing errors are provided. The significant agreement between simulation and experiment demonstrates the strong capability of ESA to precisely control the refractive index and produce excellent thin film filters. The performance of optical thin film filters is largely enhanced compared to the results of previous methods. The experiment results indicate that the ESA process may be used to fabricate optical filters and other optical structures that require precise index profile control. / Master of Science

The electrostatic self-assembly (ESA) method presents an effective application in the field of biosensing due to the uniform nanoscale structure. In previous research, a single mode fiber (SMF) sensor system had been investigated for the thin-film measurement due to the high fringe visibility. However, compared with a SMF sensor system, a multimode fiber (MMF) sensor system is lower-cost and has larger sensing area (the fiber core), providing the potential for higher sensing efficiency. In this thesis, a multimode fiber-optic sensor has been developed based on extrinsic Fabry-Perot interferometry (EFPI) for the measurement of optical thickness in self-assembled thin film layers as well as for the immunosensing test. The sensor was fabricated by connecting a multimode fiber (MMF) and a silica wafer. A Fabry-Perot cavity was formed by the reflections from the two interfaces of the wafer. The negatively charged silica wafer could be used as the substrate for the thin film immobilization scheme. The sensor is incorporated into the white-light interferometric system. By monitoring the optical cavity length increment, the self-assembled thin film thickness was measured; the immunoreaction between immunoglobulin G (IgG) and anti-IgG was investigated. / Master of Science

This dissertation demonstrates the feasibility of using novel electrostatic self-assembly (ESA) methods to fabricate linear and nonlinear optical thin films and components. The ESA process involves the layer-by-layer alternate adsorption of anionic and cationic complexes from aqueous solutions. Selection of the molecules in each layer, their orientation at the molecular level, and the order in which the layers are assembled determine the film's bulk optical, electronic, magnetic, thermal, mechanical and other properties. In this work, the capability of nanoscale control over film optical properties allowed the fabrication of complicated refractive index profiles required for linear optical interference filters. The inherent ordered nature of ESA films yielded extremely stable noncentrosymmetric thin films for second-order nonlinear optical applications. The ESA technique offers numerous advantages over conventional thin film fabrication methods and offers great potential in commercial applications such as reflectance and AR filters, EO waveguides and modulators and other optoelectronic devices. The structure of each monolayer in ESA films is dependent on the processing parameters, producing subsequent variations in bulk film properties both intentionally and incidentally. As this method is still in its infancy, variations in ESA processing methods, including process automation, are considered first in this document. These results allowed carefully controlled refractive index experiments and the synthesis of both step and graded index structures, several microns thick. Dielectric stack, Rugate, and antireflection optical interference filters were designed, synthesized and demonstrated. c(2) films of both commercially available polymer dyes and novel polymers designed specifically for the ESA process were demonstrated using second harmonic generation. UV/vis spectroscopy, ellipsometry and atomic force microscopy analysis are presented. / Ph. D.