A liberação comercial de plantas geneticamente modificadas (PGMs) é assunto controverso, devido ao desconhecimento quanto aos potenciais impactos ambientais e sócioeconômicos que pode suscitar a curto, médio e longo prazo. De modo a regular as deliberações sobre o uso de organismos geneticamente modificados (OGMs) mecanismos regulatórios que se propõem a prever tais impactos estão sendo criados em diversas nações, sendo a análise de risco (AR) o instrumento de estudo ambiental normalmente empregado nos processos decisórios. No entanto, há contestações sobre seu uso como única ferramenta de análise ambiental de PGMs, já que não possibilita a avaliação dos impactos cumulativos, indiretos, de longo prazo e dos interesses das nações delineados em suas políticas, planos e programas (PPPs). Um instrumento proposto por alguns autores passível de abarcar tais considerações é a Avaliação Ambiental Estratégica, que busca inserir a variável ambiental durante as fases de planejamento que resultam na elaboração de PPPs. Este trabalho teve como objetivo avaliar o sistema regulatório envolvendo a liberação em escala comercial de PGMs no Brasil e as potenciais contribuições da AAE para o processo decisório, contemplando os princípios de uma boa governaça ambiental nos processos decisórios. Para tanto, aplicou-se um questionário eletrônico a agentes sociais interessados pelo tema visando identificar suas visões sobre o assunto, analisou-se os procedimentos utilizados na deliberação sobre o algodão MON1445 resistente ao herbicida glifosato e, por fim, efetuou-se a avaliação dos instrumentos análise de risco, estudo de impacto ambiental (EIA) e AAE quanto à inserção da variável ambiental nas tomadas de decisão. Os resultados obtidos foram: com relação ao sistema regulatório, cujos pressupostos encontram-se na Lei de Biossegurança, evidenciou-se a falta de legitimidade nas tomadas de decisão, as quais são realizadas pela CTNBio, enquanto que a Constituição brasileira atribui aos órgãos ambientais a deliberação sobre atividades potencialmente poluidoras, dentre estas aquelas que envolvam OGMs; a deficiência dos mecanismos de participação social, pois as audiências públicas ocorrem mediante decisão da CTNBio; a falta de acesso às informações, devido a não implementação do Sistema de Informações sobre Biossegurança (SIB), além do descumprimento de diversas legislações, que configuram no desrespeito à justiça ambiental. Em razão destes fatores, conclui-se que o sistema regulatório brasileiro sobre PGMs não se baseia em uma boa governança ambiental. Quanto aos instrumentos de avaliação de impactos ambientais, a análise de risco, em função dos aspectos acima levantados, não se adequa para a avaliação prévia de PGMs, podendo ser utilizada como uma metodologia que subsidie o EIA ou a AAE. O EIA, por sua vez, não tem a atribuição de avaliar ações que envolvam territórios abrangentes, mas sim de atividades pontuais que se dão em etapas posteriores de planejamento. Já a AAE contribuiria para a tomada de decisões no tocante à liberação comercial de PGMs, em função de seus princípios de transparência, envolvimento social, planejamento ambiental, abrangência de extensos recortes territoriais, avaliação de impactos cumulativos e de longo prazo e monitoramento ambiental contínuo. Deste modo, recomendou-se a utilização da AAE no planejamento ambiental envolvendo liberações comerciais de PGMs no Brasil. / The commercial release of genetically modified crops (GMCs) is controversial, due to the lack of knowledge about the potential environmental and socio-economic impacts that can lead to short, medium and long term. In order to regulate the deliberations on the use of genetically modified organisms (GMOs), regulatory mechanisms that are proposed to predict such impacts are being created in many nations, with risk analysis (RA) being the instrument normally used in environmental studies for decision-making. However, there are some doubts about its use as the only tool of environmental analysis of PGMs, since it does not allow the assessment of cumulative, indirect and long-term impacts and the interests of the nation outlined in their policies, plans and programs (PPPs). An instrument proposed by some authors likely to embrace such considerations is the Strategic Environmental Assessment, which seeks to insert the environmental variable during the planning stages that result in the development of PPPs. This thesis aimed to evaluate the regulatory system involving the commercial release of GMCs in Brazil and the potential contribution of SEA to decisionmaking process, incorporating the principles of good governance. To this end, we applied an electronic questionnaire to some social actors to identify their views on the subject, reviewed the procedures used in the deliberation of the glyphosate-resistant cotton MON1445 and, finally, we performed the evaluation of risk analysis, environmental impact statement (EIS) and SEA as tools of environmental parameter insertion in decision-making. The results obtained were: with respect to the regulatory system, whose assumptions are in the Biosafety law, there was a lack of legitimacy in decision-making, which are held by CTNBio, while the brazilian Constitution assigns the decision on potentially polluting activitities (among which is those related to the GMOs) to the environmental agencies; the deficiency of the mechanisms of social participation, since decisions for public hearings are taking by CTNBio; lack of access to information due to non-implementation of the Information Biosafety System (IBS), and the disrespect of various laws, whith disregard for environmental justice. Because of these factors, the brazilian regulatory system on PGMs is not based on good environmental governance. With regard to instruments for environmental studies, risk analysis, according to the aspects mentioned above, is not suitable for prior assessment of GMCs and can be used as a methodology that assists EIS or SEA. The EIS, in turn, does not have the assignment to assess actions that involve extensive territories, but the pontual activities that take place in later stages of planning. SEA, in turn, would contribute to the decision-making regarding the commercial release of GMPs, according to its principles of transparency, social involvement, environmental planning, coverage of extensive territorial areas, assessment of cumulative and long-term impacts and continuous environmental monitoring. Thus, recommendations were made for the use of SEA in environmental planning involving commercial releases of GMPs in Brazil.

A liberação comercial de plantas geneticamente modificadas (PGMs) é assunto controverso, devido ao desconhecimento quanto aos potenciais impactos ambientais e sócioeconômicos que pode suscitar a curto, médio e longo prazo. De modo a regular as deliberações sobre o uso de organismos geneticamente modificados (OGMs) mecanismos regulatórios que se propõem a prever tais impactos estão sendo criados em diversas nações, sendo a análise de risco (AR) o instrumento de estudo ambiental normalmente empregado nos processos decisórios. No entanto, há contestações sobre seu uso como única ferramenta de análise ambiental de PGMs, já que não possibilita a avaliação dos impactos cumulativos, indiretos, de longo prazo e dos interesses das nações delineados em suas políticas, planos e programas (PPPs). Um instrumento proposto por alguns autores passível de abarcar tais considerações é a Avaliação Ambiental Estratégica, que busca inserir a variável ambiental durante as fases de planejamento que resultam na elaboração de PPPs. Este trabalho teve como objetivo avaliar o sistema regulatório envolvendo a liberação em escala comercial de PGMs no Brasil e as potenciais contribuições da AAE para o processo decisório, contemplando os princípios de uma boa governaça ambiental nos processos decisórios. Para tanto, aplicou-se um questionário eletrônico a agentes sociais interessados pelo tema visando identificar suas visões sobre o assunto, analisou-se os procedimentos utilizados na deliberação sobre o algodão MON1445 resistente ao herbicida glifosato e, por fim, efetuou-se a avaliação dos instrumentos análise de risco, estudo de impacto ambiental (EIA) e AAE quanto à inserção da variável ambiental nas tomadas de decisão. Os resultados obtidos foram: com relação ao sistema regulatório, cujos pressupostos encontram-se na Lei de Biossegurança, evidenciou-se a falta de legitimidade nas tomadas de decisão, as quais são realizadas pela CTNBio, enquanto que a Constituição brasileira atribui aos órgãos ambientais a deliberação sobre atividades potencialmente poluidoras, dentre estas aquelas que envolvam OGMs; a deficiência dos mecanismos de participação social, pois as audiências públicas ocorrem mediante decisão da CTNBio; a falta de acesso às informações, devido a não implementação do Sistema de Informações sobre Biossegurança (SIB), além do descumprimento de diversas legislações, que configuram no desrespeito à justiça ambiental. Em razão destes fatores, conclui-se que o sistema regulatório brasileiro sobre PGMs não se baseia em uma boa governança ambiental. Quanto aos instrumentos de avaliação de impactos ambientais, a análise de risco, em função dos aspectos acima levantados, não se adequa para a avaliação prévia de PGMs, podendo ser utilizada como uma metodologia que subsidie o EIA ou a AAE. O EIA, por sua vez, não tem a atribuição de avaliar ações que envolvam territórios abrangentes, mas sim de atividades pontuais que se dão em etapas posteriores de planejamento. Já a AAE contribuiria para a tomada de decisões no tocante à liberação comercial de PGMs, em função de seus princípios de transparência, envolvimento social, planejamento ambiental, abrangência de extensos recortes territoriais, avaliação de impactos cumulativos e de longo prazo e monitoramento ambiental contínuo. Deste modo, recomendou-se a utilização da AAE no planejamento ambiental envolvendo liberações comerciais de PGMs no Brasil. / The commercial release of genetically modified crops (GMCs) is controversial, due to the lack of knowledge about the potential environmental and socio-economic impacts that can lead to short, medium and long term. In order to regulate the deliberations on the use of genetically modified organisms (GMOs), regulatory mechanisms that are proposed to predict such impacts are being created in many nations, with risk analysis (RA) being the instrument normally used in environmental studies for decision-making. However, there are some doubts about its use as the only tool of environmental analysis of PGMs, since it does not allow the assessment of cumulative, indirect and long-term impacts and the interests of the nation outlined in their policies, plans and programs (PPPs). An instrument proposed by some authors likely to embrace such considerations is the Strategic Environmental Assessment, which seeks to insert the environmental variable during the planning stages that result in the development of PPPs. This thesis aimed to evaluate the regulatory system involving the commercial release of GMCs in Brazil and the potential contribution of SEA to decisionmaking process, incorporating the principles of good governance. To this end, we applied an electronic questionnaire to some social actors to identify their views on the subject, reviewed the procedures used in the deliberation of the glyphosate-resistant cotton MON1445 and, finally, we performed the evaluation of risk analysis, environmental impact statement (EIS) and SEA as tools of environmental parameter insertion in decision-making. The results obtained were: with respect to the regulatory system, whose assumptions are in the Biosafety law, there was a lack of legitimacy in decision-making, which are held by CTNBio, while the brazilian Constitution assigns the decision on potentially polluting activitities (among which is those related to the GMOs) to the environmental agencies; the deficiency of the mechanisms of social participation, since decisions for public hearings are taking by CTNBio; lack of access to information due to non-implementation of the Information Biosafety System (IBS), and the disrespect of various laws, whith disregard for environmental justice. Because of these factors, the brazilian regulatory system on PGMs is not based on good environmental governance. With regard to instruments for environmental studies, risk analysis, according to the aspects mentioned above, is not suitable for prior assessment of GMCs and can be used as a methodology that assists EIS or SEA. The EIS, in turn, does not have the assignment to assess actions that involve extensive territories, but the pontual activities that take place in later stages of planning. SEA, in turn, would contribute to the decision-making regarding the commercial release of GMPs, according to its principles of transparency, social involvement, environmental planning, coverage of extensive territorial areas, assessment of cumulative and long-term impacts and continuous environmental monitoring. Thus, recommendations were made for the use of SEA in environmental planning involving commercial releases of GMPs in Brazil.

The subject of this dissertation thesis is „Savings in material flows in connection with EMS in production companies“. The topic of this dissertation thesis is the saving in material flows in connection with EMS in production companies. Sound ecological management in industrial companies is important due to the fact it enhances environment protection and provides the companies concerned with competitive advantage. In many cases it provides for better organization of labor and decrease of wastage and allows for other preventive measures. The aim of this paper is to study the relation between the economical and environmental protection interests of companies operating in selected business sector, the paper examines whether environment protection activities practiced by the companies provide also economical benefit for them. The paper uses literature to analyze relations between EMS, logistics and areas in which savings can be found thus contributing to better results in the fields of environment protection and economy. The gained information together with conducted empirical research is the base used in order to determine the area in which savings could be found. Emphasis is laid on material flows which are studied in selected company active in the field of automotive industry. The analysis is based on the current organizational structure and logistic chain, the analyses focuses mainly on warehousing activities. In the studied company there is charted disconnection point which is located in the reception area in the warehouse. Narrow place was found in the dispatch area of the warehouse, the results of the analyses are the base to be used to express the amount of possible savings. Within the process evaluation, measurements and analysis of working time for each shift have been conducted, since the working load of the concerned shifts presents a risk factor from the perspective of ensuring the in time delivery of materials to the production. Proposal to improve the process is based on the synthesis of acquired facts, it allows for better utilization of working time of warehouse employees and provides extra space for manipulation with materials. When there is extra working load to be handled (extra order from customer) it also provides for the elimination of unnecessary or extra actions connected with operations. The application of the improvement proposal will abolish one of the reasons for non operation time in production, which leads to savings in energy consumption and decreases the amount of emissions. In the final part of the dissertation thesis a summary of solutions to the encountered problems is presented and the possible contribution of this thesis to theory and praxis is described.

The dissertation thesis is focused on increase of the efficiency of production processes in Czech companies, whose main work focus is electric motor production with usage of the lean manufacturing tools with the environmental management system. The main reason for choosing this topic were results of prime study of the target group of companies which has proved that companies do have trouble not just with integration but especially with implementation of the lean manufacturing methods. This is the reason why concrete conditions and basic principles need to be defined to show how to proceed. The objective of this dissertation thesis is to suggest the model of integration of lean manufacturing tools with optional environmental management tool and as the lean manufacturing tools were chosen methods of lean management in production and as an optional environmental tool was chosen system of environmental management based on norm ISO 14 001. For this area of interest the primary and secondary research was used. Based on knowledge from detailed research of Czech and foreign literary sources a survey and guided interview was started with companies, which are focused on electric motor production. The thesis contains a detailed evaluation of empirical research with testing of stated hypothesis, based on which the verbal model of the integration of the lean manufacturing tools with the environmental management system is assembled. The implantation based on the suggested verbal model of the integration in the company should lead not just to the relationship improvement between the company and the environment but also to better understanding of the relationship of two independent kinds of company management leading to saving money, working environment improvement, productivity increase or ecological onus decrease. The benefits can be seen in theoretical, practical and also pedagogical level.