International Telemetering Conference Proceedings / October 17-20, 1994 / Town & Country Hotel and Conference Center, San Diego, California / The bit rates of telemetry systems are increasing rapidly. Higher bit rates occupy more spectra and result in decreased link margin. The major signal parameters that affect the spectral occupancy and bit error probability (BEP) of binary pulse code modulation (PCM)/frequency modulation (FM) signals are the bit rate, code, premodulation filter, and peak deviation. The measured spectral occupancy is also affected by the spectrum analyzer (or other measurement equipment) settings. Additional parameters that affect the BEP include the receiver intermediate frequency (IF) filter, the FM demodulator, and the bit detector. This paper will present the effects of these parameters on the measured 99% and -60 dBc bandwidths and the BEP of binary PCM/FM telemetry signals. Normalized BEP and bandwidth curves will be presented.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / Commercial FQPSK-B receivers traditionally use symbol-by-symbol detection and have a 2 dB Eb=No loss relative to ideal QPSK at a bit error rate (BER) of 10^(-5). An enhanced FQPSK-B receiver using a Viterbi algorithm (VA) to perform trellis decoding is simulated and shown to have a 1.2 dB Eb=No improvement over symbol-by-symbol detection for 10^(-5)5 BER at the cost of increased complexity. A simplified Viterbi receiver with a reduced trellis and significantly less complexity is introduced with only a slight BER degradation compared to the full Viterbi receiver. In addition, a theoretical bit error probability expression for the symbol-by-symbol FQPSK-B receiver is derived and compared with simulation results.

[pt] É desenvolvido, inicialmente, um modelo geral para os sistemas de Transmissão Digital Coerentes em presença de ruído térmico e interferência entre símbolos obtendo-se expressões formais da Probabilidade de Erro para diversos sistemas de modulação. A seguir são apresentados e analisados métodos para o cálculo aproximado destas Probabilidades de Erro em função dos momentos da amostra interferente colhida no receptor. São comparados métodos para o cálculo dos momentos de uma soma de variáveis aleatórias e os métodos da Série de Gram-Charlier e da Regra de Quadratura de Gauss para aproximação da Probabilidade de Erro. E constatada a maior eficiência da Regra da Quadratura de Gauss e a possibilidade de se reduzir os cálculos a um problema unidimensional, mesmo em sistemas de modulação bidimensional. Finalmente a aplicação do método é ilustrada em casos de interesse. / [en] This work develops first a general model for Coherent Digital Transmission Systems in presence of thermal noise and intersymbol interference arriving at error probabilities expressions for several modulation systems. Methods of approximate calculations of error probabilities based on moments of received interference samples are presented and analyzed. Comparisons are made between methods for calculating moments of sums of random variables. Comparisons between methods for approximating error probabilities are also made. It was found Gauss Quadrature Rule method for approximating these error probabilities was more efficient then Gram-Charlier Series method. It was also found possible to reduce calculations into a unidimensional problem, even in bidimensional modulation systems. At the end several applications of methods are shown.

Abstract Radio link adaptation, multiple antenna techniques, relaying methods and dynamic radio resource assignment are among the key methods used to improve the performance of wireless communication networks. Opportunistic resource block (RB) allocation in downlink orthogonal frequency division multiple access (OFDMA) with limited feedback is considered. The spectral efficiency analysis of multiuser OFDMA with imperfect feedback path, multiple antenna methods and relaying methods is a particular focus. The analysis is derived for best-M feedback methods and for a RB-wise signal-to-noise ratio (SNR) quantization based feedback strategy. Practical resource fair round robin (RR) allocation is assumed at the RB assignment, i.e., each user gets the same portion of the available RBs. The fading of each RB is modelled to be independent and identically distributed (IID). This assumption enabled a communication theoretic approach for the performance evaluation of OFDMA systems The event probabilities related to the considered OFDMA systems are presented so that the feedback bit error probability (BEP) is a parameter in the expressions. The performance expressions are derived for the BEP in the case of binary phase-shift keying (BPSK) modulation and single antenna methods. Asymptotic BEP behavior is considered for the best-M feedback methods when the mean SNR tends to infinity. The system outage capacity and the average system spectral efficiency are investigated in the case of multiple antenna schemes. Antenna selection and space-time block coding (STBC) are considered in multiple antenna schemes when each RB is allocated exclusively to a single user. Simple OFDMA-spatial division multiple access (SDMA) schemes are also analyzed when zero forcing (ZF) detection is assumed at the receiver. Relay enhanced dynamic OFDMA with single and multiple antennas at each end is considered for fixed infrastructure amplify-and-forward (AF) relaying methods. The average spectral efficiency has been derived for the best-M and RB-wise one bit feedback schemes, antenna selection and STBC methods. The best choice for a combination of multiple antenna scheme and feedback strategy depends on several system parameters. The proposed analytical tools enable easy evaluation of the performance of the investigated schemes with different system parameters. The fundamental properties of the combinations of feedback and multiple antenna schemes are extensively studied through numerical examples. The results also demonstrate that the analytical results with idealized IID fading assumption are close to those obtained via simulations in a practical frequency selective channel when RBs are selected properly. Dynamic RB allocation is attractive for practical OFDMA systems since significant performance gain over random allocation can be achieved with a practical allocation principle, very low feedback overhead and an imperfect feedback channel.

In this thesis, we propose a novel architecture for hybrid radio frequency (RF)/free–space optics (FSO) wireless systems. Hybrid RF/FSO systems are attractive since the RF and FSO sub–systems are affected differently by weather and fading phenomena. We give a thorough introduction to the RF and FSO technology, respectively. The state of the art of hybrid RF/FSO systems is reviewed. We show that a hybrid system robust to different weather conditions is obtained by joint bit–interleaved coded modulation (BICM) of the bit streams transmitted over the RF and FSO sub–channels. An asymptotic performance analysis reveals that a properly designed convolutional code can exploit the diversity offered by the independent sub–channels. Furthermore, we develop code design and power assignment criteria and provide an efficient code search procedure. The cut–off rate of the proposed hybrid system is also derived and compared to that of hybrid systems with perfect channel state information at the transmitter. Simulation results show that hybrid RF/FSO systems with BICM outperform previously proposed hybrid systems employing a simple repetition code and selection diversity.

In this thesis, we propose a novel architecture for hybrid radio frequency (RF)/free–space optics (FSO) wireless systems. Hybrid RF/FSO systems are attractive since the RF and FSO sub–systems are affected differently by weather and fading phenomena. We give a thorough introduction to the RF and FSO technology, respectively. The state of the art of hybrid RF/FSO systems is reviewed. We show that a hybrid system robust to different weather conditions is obtained by joint bit–interleaved coded modulation (BICM) of the bit streams transmitted over the RF and FSO sub–channels. An asymptotic performance analysis reveals that a properly designed convolutional code can exploit the diversity offered by the independent sub–channels. Furthermore, we develop code design and power assignment criteria and provide an efficient code search procedure. The cut–off rate of the proposed hybrid system is also derived and compared to that of hybrid systems with perfect channel state information at the transmitter. Simulation results show that hybrid RF/FSO systems with BICM outperform previously proposed hybrid systems employing a simple repetition code and selection diversity.

In this thesis, we propose a novel architecture for hybrid radio frequency (RF)/free–space optics (FSO) wireless systems. Hybrid RF/FSO systems are attractive since the RF and FSO sub–systems are affected differently by weather and fading phenomena. We give a thorough introduction to the RF and FSO technology, respectively. The state of the art of hybrid RF/FSO systems is reviewed. We show that a hybrid system robust to different weather conditions is obtained by joint bit–interleaved coded modulation (BICM) of the bit streams transmitted over the RF and FSO sub–channels. An asymptotic performance analysis reveals that a properly designed convolutional code can exploit the diversity offered by the independent sub–channels. Furthermore, we develop code design and power assignment criteria and provide an efficient code search procedure. The cut–off rate of the proposed hybrid system is also derived and compared to that of hybrid systems with perfect channel state information at the transmitter. Simulation results show that hybrid RF/FSO systems with BICM outperform previously proposed hybrid systems employing a simple repetition code and selection diversity. / Applied Science, Faculty of / Electrical and Computer Engineering, Department of / Graduate

International Telemetering Conference Proceedings / October 20-23, 2003 / Riviera Hotel and Convention Center, Las Vegas, Nevada / One of the charters of the Advanced Range Telemetry (ARTM) program was to develop more spectrally efficient waveforms while trying to maintain similar performance to the legacy waveform, Pulse Code Modulation/Frequency Modulation (PCM/FM). The first step toward this goal was the ARTM Tier I family of waveforms which include Feher patented, quadrature phase shift keying, -B version (FQSPKB) and shaped offset quadrature phase shift keying, Telemetry Group version (SOQPSK-TG). The final step was development of Tier II, an even more spectrally efficient waveform, multi-h Continuous Phase Modulation (CPM). This paper characterizes the performance of this waveform when applied in an airborne telemetry environment and, where appropriate, comparisons are made with existing Tier 0 and Tier I waveforms. The benefits, drawbacks, and trade-offs when applying this waveform in an airborne environment will also be discussed.

International Telemetering Conference Proceedings / October 23-26, 2000 / Town & Country Hotel and Conference Center, San Diego, California / When designing transmitters for quadrature modulation schemes, the designer always tries to achieve good balance and symmetry of the in-phase (I) and quadrature (Q) branches of the modulator in terms of amplitude, phase, and offsets. Perfect balance between modulators is ideal but rarely if ever achieved. The Advance Range Telemetry (ARTM) program has placed indirect specifications on the remnant carrier and sideband levels which are controlled by modulator imbalance. These specifications will govern the ARTM programs first generation of Feher’s patented quadrature phase shift keying, version B (FQPSK-B) [9] airborne telemetry transmitters. The ARTM Program has also adopted test procedures for quantifying these modulation imbalances. This paper looks at the effects of modulator imbalances on spectral occupancy and bit error probability of the airborne telemetry link. It also outlines how these imbalances influence the levels in one of the ARTM specifications. Recommendations are presented based on the measured data for higher bit rate telemetry systems.

We construct polar codes for binary relay channels with orthogonal receiver components. We show that polar codes achieve the cut-set bound when the channels are symmetric and the relay-destination link supports compress-and-forward relaying based on Slepian-Wolf coding. More generally, we show that a particular version of the compress-and-forward rate is achievable using polar codes for Wyner-Ziv coding. In both cases the block error probability can be bounded as O(2-Nβ) for 0 &lt; β &lt; 1/2 and sufficiently large block length N. / <p>© 2010 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works. QC 20111207</p>