Spelling suggestions: "subject:"eucalyptus genetics."" "subject:"eucalyptus kenetics.""
1 |
Genetic variability and leaf waxes of some Eucalyptus species with horticultural potential / Michelle Gabrielle Wirthensohn.Wirthensohn, Michelle Gabrielle January 1998 (has links)
Copies of author's previously published articles inserted. / Bibliography: leaves 122-137. / xiv, 158 leaves, [16] leaves of plates : ill. (chiefly col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / 18 species of Eucalyptus were subjected to trials to investigate their suitability for floriculture and the effect of pruning for cut flower production. Post harvest trials were conducted to assess the vase life of cut stems, and the effect of pulsing and simulated transportation on vase life. Species of Eucalyptus were also studied for changes in wax morphology of juvenile foliage with leaf age and for variation in amount and composition of leaf epicuticular wax. Molecular markers were discovered which may facilitate the management of E. gunnii breeding and selection for the cut foliage industry, by providing an initial screen for glaucousness. 12 species were recommened for the cut foliage industry. / Thesis (Ph.D.)--University of Adelaide, Dept. of Horticulture, Viticulture and Oenology, 1999
|
2 |
Genetic variability and leaf waxes of some Eucalyptus species with horticultural potentialWirthensohn, Michelle Gabrielle. January 1998 (has links) (PDF)
Copies of author's previously published articles inserted. Bibliography: leaves 122-137. 18 species of Eucalyptus were subjected to trials to investigate their suitability for floriculture and the effect of pruning for cut flower production. Post harvest trials were conducted to assess the vase life of cut stems, and the effect of pulsing and simulated transportation on vase life. Species of Eucalyptus were also studied for changes in wax morphology of juvenile foliage with leaf age and for variation in amount and composition of leaf epicuticular wax. Molecular markers were discovered which may facilitate the management of E. gunnii breeding and selection for the cut foliage industry, by providing an initial screen for glaucousness. 12 species were recommened for the cut foliage industry.
|
3 |
Genetic variability and leaf waxes of some Eucalyptus species with horticultural potential / Michelle Gabrielle Wirthensohn.Wirthensohn, Michelle Gabrielle January 1998 (has links)
Copies of author's previously published articles inserted. / Bibliography: leaves 122-137. / xiv, 158 leaves, [16] leaves of plates : ill. (chiefly col.) ; 30 cm. / Title page, contents and abstract only. The complete thesis in print form is available from the University Library. / 18 species of Eucalyptus were subjected to trials to investigate their suitability for floriculture and the effect of pruning for cut flower production. Post harvest trials were conducted to assess the vase life of cut stems, and the effect of pulsing and simulated transportation on vase life. Species of Eucalyptus were also studied for changes in wax morphology of juvenile foliage with leaf age and for variation in amount and composition of leaf epicuticular wax. Molecular markers were discovered which may facilitate the management of E. gunnii breeding and selection for the cut foliage industry, by providing an initial screen for glaucousness. 12 species were recommened for the cut foliage industry. / Thesis (Ph.D.)--University of Adelaide, Dept. of Horticulture, Viticulture and Oenology, 1999
|
4 |
Development of an advanced generation breeding strategy for Eucalyptus Nitens (Deanne and Maiden) Maiden.Swain, Tammy-Lyn. January 2013 (has links)
The objective of this study was to develop and implement an advanced generation breeding
programme at the Institute for Commercial Forestry Research (ICFR) to manage and
integrate the many and disjunct breeding and production populations of Eucalyptus nitens
established by various entities over the past 30 years at multiple sites in South Africa. To
develop such a breeding strategy, a good understanding of the population genetics, and the
underlying assumptions made by tree breeders about the species, was needed.
Eucalyptus nitens is an important forestry species grown for pulp and paper production in the
temperate, summer rainfall regions of South Africa. A tree improvement programme has
been ongoing at the ICFR for three decades. The measurement and statistical analysis of
data from eight F1 trials established during the 1980s and 1990s have enabled
characterisation of the ICFR’s breeding population. Provenance testing showed that the
more northerly New South Wales (Australia) Eucalyptus nitens provenances of Barren
Mountain and Barrington Tops are distinctly better suited to growth in South Africa than the
southern New South Wales provenances and the Victorian provenances, Penny Saddle and
Bendoc. Generally, the species was not badly affected by Coniothyrium canker. High Type B
genetic correlations for all sites pairs, except one comparison, ranged from 0.75 to 0.99 for
diameter at breast height at 76 to 113 months, indicating very little, or no, genotype by
environment interaction for diameter at breast height for the genotypes tested in the F1
generation. Narrow sense heritability estimates ranged from 0.01 to 0.34, indicating that the
species provides a breeding opportunity for improvement of diameter growth. High genetic
correlations of greater than 0.90 between diameter measurements at 52 to 62 months after
establishment and diameter measurements at 94 or 113 months were found, indicating that
selections can be made reliably at five or six years. Diameter measurements at both 60
months and full rotation (94 to 113 months) were highly correlated with the final height
measurements in these trial series (rg > 0.71 and > 0.83, respectively). Predicted genetic
gains for the F2 over the F1 generation were highest in the trials at Goedehoop and Arthur’s
Seat, with predicted increases in diameter at breast height of 3.07 cm (17.1%) and 3.17 cm
(20.7%), respectively, at full rotation.
Genetic improvement in the species has been slower than anticipated due to delayed and
infrequent flowering and seed production. Three genetic gain trials were established, firstly,
to quantify the gains that have been made in the first generation of improvement in the
breeding programme; and secondly, to establish whether a number of seed source and
orchard variables influence the performance of the progeny. These variables were: the
number of flowering trees in the seed orchard, year of seed collection, seed orchard origin
and composition of seed orchard seed bulks. Diameter at breast height and tree height were
measured in the trials at between 87 and 97 months after establishment, and timber volumes
and survival were calculated. Improved seed orchard bulks performed significantly better
(p < 0.01) than unimproved controls in the field trials, and genetic gains ranging from 23.2 to
164.8 m3ha-1 were observed over the unimproved commercial seed. There were significant
differences (p < 0.01) in progeny growth between the levels of flowering, with higher levels of
flowering (R 40 %) producing substantially greater progeny growth than lower flowering levels
(S 20 %). The seed orchard origin had no effect on progeny growth in this trial series. This
suggests that seed collected from any of the four seed orchards tested will produce trees
with significant improvement in growth.
Various scenarios investigating a range of assumptions were developed and used to predict
genetic gain in the F2 populations. These were compared with realised gains achieved in the
genetic gain trials. The family nested within provenance scenarios proved to be closer to
realised gain than the family across provenance predictions. Two scenarios were used for
family nested within provenance: Firstly, actual flowering for family nested within provenance;
and secondly, estimated flowering after a 30% roguing of poor families. For both scenarios, a
coefficient of relationship of 0.33 predicted gains closest to the realised gains. Indications
were that the effects were additive, and that very little or no heterosis had occurred. The
statistical information suggested that outcrossing in the seed orchards was > 80%. This study
provides an objective and quantitative assessment of the underlying assumptions used for
estimating genetic parameters, and predicting gain in this population of Eucalyptus nitens.
At the same time that genetic gain trials were established, F2 trials were planted, using
seedlots collected from F1 seed orchards. Analysis of the two F2 trials showed that realised
gains for diameter at breast height at 87 months were close to the predicted values and
ranged from 1.02 cm to 1.90 cm. Two exceptions were the sites at Helvetia and Babanango,
where gains were under- and over-predicted, respectively. Realised heritability estimates, which are related directly to the realised gain and the actual selection intensities used in the
seed orchards, reflected this trend. Estimation of breeding values allowed for selection of
elite individuals in top families. Both grand-maternal provenance origin and F1 maternal
effects were significant in the F2 trials. A Type B genetic correlation of 0.61 for diameter at
87 months indicated the possible presence of genotype by environment interactions for the
two F2 sites. A low narrow sense heritability estimate of 0.06 for diameter at breast height at
87 months at one F2 site indicated that more emphasis should be placed on family
information rather than individual information at this site. A heritability estimate of 0.17 for
diameter at breast height at 87 months at the second site, however, indicated that further
improvement is possible in this population of Eucalyptus nitens.
Modelling of predicted genetic gain using various breeding strategy scenarios can be a
useful tool in assisting with the decision on which strategy or management plan will deliver
the most genetic gains per unit time. Such modelling, using the parameters established in the
first part of the study, played an important role in developing the advanced generation
breeding strategy for Eucalyptus nitens. In addition, the modelling exercise highlighted
various management options which could be used to increase gains in the existing
production populations or orchards. Indications are that additional roguing of 1) existing
Clonal Seed Orchards based on results of F2 trials (i.e., backward selection); and 2) F1
Breeding Seed Orchards based on stricter provenance selection, will markedly increase the
quality of the seed produced from these orchards within one season. This study also
highlighted the importance of shortening the breeding cycle in Eucalyptus nitens, particularly
in view of the delays caused by reticent flowering and seed production in the species.
The information and understanding gathered from this study led to the development of a
proposal for an advanced generation breeding strategy in Eucalyptus nitens. This proposal
uses parental reconstruction of open-pollinated progeny to secure pedigree information of
forward selections, thus combining the benefits of increased genetic gain with a shortened
breeding cycle. Recommendations on the management and adaption of current production
populations to increase gains have been made, because establishment and management of
improved material in seed orchards to ensure a sustainable supply of improved seed to the
South African forestry industry, is a key objective of the ICFR Eucalyptus nitens breeding
programme. / Thesis (Ph.D.)-University of KwaZulu-Natal, Pietermaritzburg, 2013.
|
5 |
Genetic and environmental factors affecting rooting in Eucalyptus grandis X Eucalyptus longirostrata hybrid cuttings.Naidoo, Nuveshen. January 2011 (has links)
In clonal deployment programmes of plantation species, there is frequently the need to deploy Eucalyptus species and interspecific hybrids as rooted cuttings. However, the rooting ability of a particular species or hybrid is a major, and usually limiting, factor affecting the economics of commercial deployment. There is also significant between-species and between-family variation for this trait. Recently, Eucalyptus longirostrata was crossed with E. grandis in an effort to combine its desirable wood properties, drought tolerance and disease resistance with the latter's vigorous growth. Should progeny with these suitable characteristics be identified, there is the possibility of extending plantations to more marginal areas and increasing the quality and volume from existing plantations. An investigation was undertaken to study the rooting ability of E. grandis x E. longirostrata hybrid cuttings. The plant material was sourced from five families in seedling derived hedges at two nurseries, as well as five families coppiced from an unreplicated progeny trial planted in the midlands of KwaZulu-Natal. Their rooting ability was assessed by determining the percentage of cuttings that developed roots using two different rooting methods. The variation between and within families and clones is presented. The study shows that root strike is under moderate genetic control, with an estimate of broad-sense rooting heritability of 0.197 (S.E. = 0.070). The two nurseries used in this study used different rooting technologies, with cuttings rooted either in media (traditional method) or in air (aeroponically). The aeroponics technology was highly significantly (p<0.0001) superior, in terms of rooting success. Rooting was also highly significantly affected (p<0.0001) by the temperature at the time of cutting. Rooting success of cuttings from seedling-derived parental hedges was similar to cuttings from coppiced stumps. The consequences of the low repeatability of measurements of rooting ability, 0.187 (S.E. 0.067) by clone and 0.340 (S.E. 0.072) by ramet, which was influenced by the response to age of material and nursery conditions, is discussed. This study demonstrated that large improvements in rooting success can be made by the optimization of rooting protocols and selecting for superior genotypes, as long as the performances of genotypes are accurately assessed. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2011.
|
6 |
A quantitative study on growth, basic wood density and pulp yield in a breeding population of Eucalyptus urophylla S.T. Blake, grown in KwaZulu-Natal.Van Deventer, Francois. January 2008 (has links)
The first objective of this study was to evaluate Eucalyptus urophylla S.T. Blake provenances in terms of their growth, basic wood density and pulp yield properties. The second objective was to determine the genetic and phenotypic associations that may exist between growth, basic wood density and pulp yield. Data of 9022 open-pollinated progenies representing 306 families, collected from 17 provenances, were used to evaluate growth. To evaluate basic wood density and pulp yield, as well as the genetic and phenotypic associations between the three traits, data of 300 open-pollinated progenies representing 30 selected families from 11 provenances were used.
Narrow-sense heritabilities for all three traits were estimated from data collected in a single E. urophylla provenance/progeny trial planted in northern KwaZulu-Natal. The results showed that significant provenance effects for growth, basic wood density and pulp yield were observed. Heritability was found to be strong for basic wood density (h2 = 0.51) and moderate to weak for volume growth and pulp yield (h2 = 0.17 and h2 = 0.11, respectively). This suggests that big genetic gains can be achieved for basic wood density. Although the heritability estimates for volume growth and pulp yield were
weaker, this still allows for tree breeders to make significant genetic gains through accurate selection from this E. urophylla breeding population. Genetic and phenotypic associations between the three traits were estimated from data collected in the same trial. The genetic correlation between volume growth and pulp yield was positive and moderately strong (rA = 0.66). The genetic correlation estimate between volume growth and basic wood density was found to be negative but weak (rA = -0.08). The genetic association between pulp yield and basic wood density was found to be positive but weak (rA = 0.17). Correlation estimates between volume growth and basic wood density, as well as between pulp yield and basic wood density produced standard errors greater than the correlation itself (s.e. = ± 0.32 and ± 0.22, respectively). These high standard errors, coupled with weak genetic correlations, suggest that these correlation estimates are non-significant, but are probably a result of utilizing a small sample size. However, these correlations have a value in making breeding choices, if treated with caution.
Key words: Eucalyptus urophylla, provenance, growth, basic wood density, pulp yield, heritability, genetic correlation / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2008.
|
7 |
Breeding of advanced generation of Eucalyptus macarthurii-growth parameters and development of a near infrared (NIR) calibration model to predict whole tree pulp yield using non destructive cores.Ndlovu, Zama Thandekile Laureen. January 2008 (has links)
Eucalyptus macarthurii is one of the cold tolerant eucalypt species grown in South Africa
for pulp and paper. However, little research has been done on this species’ growth
performance. A study was therefore initiated to: i) analyse growth characteristics of
Eucalyptus macarthurii at two sites and to calculate genetic parameters (genetic and
phenotypic correlations, heritabilities and genetic gains), ii) develop a non-destructive
near infrared calibration model to predict whole tree pulp yield of Eucalyptus macarthurii,
and iii) screen a second generation Eucalyptus macarthurii breeding population, using
the developed near infrared calibration model on core samples, to predict screened pulp
yield and to rank and identify families with superior pulping properties.
Eucalyptus macarthurii population growth data (diameter under bark, diameter
over bark, bark thickness, bark stripping, height, basic wood density and stem form)
were measured at Pinewoods and Vlakkloof sites and their respective genetic
parameters calculated. Genotype by environment interaction was found in this
population, indicating that different populations should perhaps be developed
independently of each other for the two sites. Genetic and phenotypic correlations
between diameter over bark and diameter under bark were, 0.96 and 0.98 for
Pinewoods and 0.98 and 0.99 for Vlakkloof, respectively. These correlations indicated
that selection of diameter over bark would lead to a positive indirect selection for
diameter under bark. The heritability estimates also ranged from 0.03 to 0.23 at both
sites, which indicated a reasonable response to selection. The predicted gains for all
traits found at Pinewoods were higher than those at Vlakkloof for progeny trials E76/P1,
except height for progeny trial E76/P2, which was 2.09m at Pinewoods site and 3.52m at
Vlakkloof site which showed that, selection for taller trees will be more effective at
Vlakkloof site.
A preliminary study was undertaken from eleven second generation trees (2007
tree collection) to investigate if the radial strip core taken at breast height predicts the
whole tree wood properties. Correlations found between laboratory Kraft pulping of
whole tree wood discs and whole tree NIR spectra with that of the radial strip core NIR
spectra were 0.9472 and 0.9506, respectively. These results confirmed that NIR spectra
of the radial strip core at breast height predict the whole tree wood properties. A non-destructive near infrared calibration model using wood samples was
obtained from Eucalyptus macarthurii felled trees. The wood samples were chipped into
wood chips, pulped using Kraft pulping (reference method) and a sub-sample of wood
chips of the same trees were ground into sawdust samples and analysed through near
infrared spectroscopy for screened pulp yield. The screened pulp yield values obtained
from both processes had a narrow screened pulp yield range of 40 to 48%. The
Eucalyptus macarthurii screened pulp yield values obtained from both processes, as well
as from values obtained from other eucalypt species, were subjected to Vision®
Software for calibration and validation of the near infrared calibration model.
The results indicated a strong calibration correlation coefficient of 94%, between Kraft
pulping and near infrared spectroscopy with a validation coefficient of 89%. The strong
correlation and validation coefficient indicated that a reliable non-destructive near infrared
model to predict screened pulp yield was successfully developed. The successful
development of the valid calibration model required a wider range of other eucalypts
species, which improved the development of the model.
The developed calibration model was applied to the second generation breeding
population planted in KwaZulu-Natal and Mpumalanga provinces, using wood core
samples obtained from standing trees for the prediction of screened pulp yield. The
highest screened pulp yield achieved was 48%, which compared well to that found for
Kraft pulping, which confirmed the success of the development of the calibration model.
There was a wide scope of growth variation found amongst traits, which will be
useful in selecting superior trees for the next generation. The development of the nondestructive
near infrared calibration model was a success due to the strong correlation
coefficients found between the screened pulp yields obtained from Kraft pulping and
near infrared spectroscopy processes, which was achieved by the inclusion of other
eucalypt species in the dataset.
The calibration model can be used to select the top performing individual and
family trees for the next generation based on screened pulp yield. Tree improvement
trials can now be conserved for further breeding, without felling the trees for
determination of pulping properties. / Thesis (M.Sc.)-University of KwaZulu-Natal, Pietermaritzburg, 2008.
|
Page generated in 0.0726 seconds