This diploma thesis deals with design of the supporting steel structure of the building of the exhibition pavilion with 84 m length and 30 m width. Roofing structure is designed and examined in two versions. Variant A is designed like tubular truss girder with axis distance 6 m. Variant B is also designed like tubular truss girder, but with different look, with same axis distance. These versions are compared by weight, manufacturing complexity and appearance, preferable version is processed in detail. Drawing documentation includes an anchor plan, layout structure and truss production drawing.

The subject of the diploma thesi is the design and assessment of the pavilions supporting structure for exhibition and other purposes. The building is located close to Zlin. Preliminary designs of supporting structure were created. One of these was selected and detaileddesigned and assessed. Generallythere are two structures that are extended between themselves. A design and assessment of the entrance portal for the exhibition pavilion was created. The entrance portal is an atypical structure that was created from a combination of hyperboloid and cylinder. The entire portal is formed of welded parts and it is completely from glass. The entrance portal has a variable height, where the highest point is 8,258m. The entrance portal is 20,394m long and has a variable width, where the largest width is 12,000m. The exhibition hall, which is located behind the entrance portal was designed from flat arched truss trusses. The arched trusses are made of several radii and hasa overall impression of an elliptical truss. The trusses have a range 37,000m and they are axially distant 6,000m. The height of the arched trusses is 10.530m. In the leading position of the construction were designed pillars and construction for possible connection of the entrance portal, or for the location of the gate system. Whole construction of the exhibition pavilion, without the entry portal, is 54,000m long and 37,000m wide. The built-up area of both structures is approximately 2200m2. Construction are designed according to normative requirements of CSN EN for limit state of load capacity and usability. The main material of the supporting structural parts was used S355JR steel.

The aim of the work is to design steel structure exhibition pavilion. The building is situated in Brno. The construction is processed in two options. The option A is designed in variant of arched space frame. The internal ground plan dimensions of the building are 42 x 72 meters. Space frame is hinged to the structure of columns. Height in the top of the ship is 16,834 metres. The option B is designed in variant arched truss. The internal ground plan dimensions of the building are 42 x 70 meters. Arched truss is hinged to the structure of columns. Height in the top of the ship is 18,334 metres. The spatial rigidity of the structure is ensured by cross braces. Roof cladding and walls will be made using sandwich panels of KINGSPAN. The main material will be used steel S235.

Esta tese pretende investigar a produção da arquitetura no período entre as décadas de 1960-70. Adota como premissa inserir-se nas questões de cunho metodológico da história da arquitetura, partindo do entendimento de que a arquitetura é fruto da dialética entre a autonomia do projeto e o estado das forças produtivas em determinado momento histórico. As reflexões aqui propostas tentam articular múltiplas relações dentro do processo da produção da arquitetura - o que significa incluir desde a concepção, o desenho, o canteiro e até mesmo seu uso - corroborando para um entendimento mais amplo, aquém da própria disciplina da arquitetura. O Parque Anhembi, um centro de exposições ligado ao turismo de negócios em São Paulo, permite analisar três níveis de produção: a industrialização da estrutura metálica, a pré-fabricação do concreto e a adoção de novas tecnologias do concreto armado executado no canteiro, temas que podem caracterizar a \"pluralidade\" da produção do período pós-Brasilia, ou mesmo, explicitar a preocupação construtiva que intermediava muitas pranchetas naquele momento. A possibilidade que se abre na investigação do objeto tido como uma nova centralidade urbana e a analise de como seria possível abarcar o tema das práticas projetuais naquele momento em que se fortalecia uma relação importante entre urbanismo, arquitetura, engenharia e construção no meio da busca de uma nova produção. Busca que continha um discurso político e ideológico sobre o seu tempo suscitados principalmente pelas questões urbanas evidenciadas com máxima urgência. / This thesis intends to investigate the production of architecture in the Between the decades of 1960-70. It is a premise that it should be included in the Methodological approach in the history of architecture, starting from the understanding that architecture is Of the dialectic between the autonomy of the project and the state of the productive forces in Certain historical moment. The reflections proposed here attempt to articulate multiple Relationships within the architecture production process - which means including from the Design, design, and even use - corroborating Understanding, rather than the discipline of architecture itself. Anhembi Park, an exhibition center linked to tourism Business in São Paulo, allows us to analyze three levels of production: the industrialization of Structure, the pre-fabrication of concrete and the adoption of new Reinforced concrete executed in the bed, themes that can characterize the \"plurality\" Of the post-Brasilia period, or even to explain the constructive concern Which interwoven many boards at that moment. The possibility that opens in the Investigation of the object considered as a new urban centrality and the analysis of how It would be possible to embrace the theme of the design practices at that moment in which Strengthened an important relationship between urbanism, architecture, engineering and construction. In the middle of the search for a new production. It sought to contain a political discourse and Ideological issues about their time that have been raised mainly by urban Evidenced with maximum urgency.

Esta tese pretende investigar a produção da arquitetura no período entre as décadas de 1960-70. Adota como premissa inserir-se nas questões de cunho metodológico da história da arquitetura, partindo do entendimento de que a arquitetura é fruto da dialética entre a autonomia do projeto e o estado das forças produtivas em determinado momento histórico. As reflexões aqui propostas tentam articular múltiplas relações dentro do processo da produção da arquitetura - o que significa incluir desde a concepção, o desenho, o canteiro e até mesmo seu uso - corroborando para um entendimento mais amplo, aquém da própria disciplina da arquitetura. O Parque Anhembi, um centro de exposições ligado ao turismo de negócios em São Paulo, permite analisar três níveis de produção: a industrialização da estrutura metálica, a pré-fabricação do concreto e a adoção de novas tecnologias do concreto armado executado no canteiro, temas que podem caracterizar a \"pluralidade\" da produção do período pós-Brasilia, ou mesmo, explicitar a preocupação construtiva que intermediava muitas pranchetas naquele momento. A possibilidade que se abre na investigação do objeto tido como uma nova centralidade urbana e a analise de como seria possível abarcar o tema das práticas projetuais naquele momento em que se fortalecia uma relação importante entre urbanismo, arquitetura, engenharia e construção no meio da busca de uma nova produção. Busca que continha um discurso político e ideológico sobre o seu tempo suscitados principalmente pelas questões urbanas evidenciadas com máxima urgência. / This thesis intends to investigate the production of architecture in the Between the decades of 1960-70. It is a premise that it should be included in the Methodological approach in the history of architecture, starting from the understanding that architecture is Of the dialectic between the autonomy of the project and the state of the productive forces in Certain historical moment. The reflections proposed here attempt to articulate multiple Relationships within the architecture production process - which means including from the Design, design, and even use - corroborating Understanding, rather than the discipline of architecture itself. Anhembi Park, an exhibition center linked to tourism Business in São Paulo, allows us to analyze three levels of production: the industrialization of Structure, the pre-fabrication of concrete and the adoption of new Reinforced concrete executed in the bed, themes that can characterize the \"plurality\" Of the post-Brasilia period, or even to explain the constructive concern Which interwoven many boards at that moment. The possibility that opens in the Investigation of the object considered as a new urban centrality and the analysis of how It would be possible to embrace the theme of the design practices at that moment in which Strengthened an important relationship between urbanism, architecture, engineering and construction. In the middle of the search for a new production. It sought to contain a political discourse and Ideological issues about their time that have been raised mainly by urban Evidenced with maximum urgency.

The aim of diploma thesis is to design steel roof structure of minimum dimensions 45 m x 50 m and minimum height 12 m. The plan of the building design has dimensions of 52,14 m x 70, 00 m and height is 18,68 m. The roofing was design as 3D truss girders with two lower chords and one upper chord. The shape of 3D truss girder consists of three circular arcs of radius 69,88m, 12,43 m and 33,45 m. Between main girders is 3D bracing. The structure is pin-supported.

Brno will continue to be the city and the centre of the fairs. The historical part around the pavilion A is opened to public and the fairs are concentrated around the pavilion Z, where a new city entrance is planned within a linear park, also a new pavilion and a superstructure with residence of BVV is planned. Newly, the terminal Lipová is designed with the cableway station, which is not only an attraction over the valley of Pisárky, but also represents a form of transport to the campus Bohunice and back to the trade fair center. The design of an exhibition pavilion is situated in a part of Brno-Pisárky, in western area of BVV. The Pavilion contains an exhibition hall and an entrance edifice on a new axis directed from an Anthropos over an superstructure on a significant pavilion Z. The entrance edifice in a central of pavilion is surrounded by exhibition area and its centre is plaza with natural woody plants and colonnade. Entries are leaded on galleries on this level. Galleries are opened into the exhibition hall. A restaurant has a specific view on the dominant-pavilion Z. A visitor goes through the plaza and descends on monumental stairs to the pavilion Z into area of BVV in a primary direction. The visitor descents from the plaza over each galleries to the exhibiton area in a secondary direction. The proposal offers to the visitors and exhibitors not only gathering outdoor relaxation area on the plaza, but moreover interesting experiences from galleries. The total built area of the pavilion is almost equal to the exhibition area, because the design creates the entry level on the third floor. The new building meets the requirements of modern exhibitions and will be used for social and educational events - balls, weddings, conferences, cultural events - concerts, theater, opera performances and sports events. The Pavilion will be visited by inhabitents of all ages not only from Brno, from near and distant surroundings, but also by visitors from abroad.

The Master´s thesis contains design of steel construction of exhibition pavilion, which is consists of columns, dome, lantern and suspension footbridge. Building will be intended for organizing exhibitions and conferences by town Trutnov. Two models of variants of dome´s construction are drafted in this work– Schwedler´s and Föpple´s dome. Models are space tubular structures.The work contains static assessment of spatial structures and spherical steel joint in program SCIA Engineer for both variants. Hand assessment of bars, basic details and anchoring, technical report and drawing dokumentation are drafted for selected variant construction with Schwedler´s dome.

The subject of the diploma thesis is design and examination of supporting steel structure of the exhibition pavilion situated at the Brno Exhibition Centre, including a comparison with the second variant. The design emphasis has been placed on keeping the architectural character of building related to its purpose. The structure consists of 11 sections shaped as elliptical arcs, formed by truss frames with variable length of semi-axes, while the largest size (the smallest) is 13 m (7 m) for minor semi-axis and 20 m (14 m) for the main semi-axis, height is 16 m (10 m) and distance of support 38.92 m (25.30 meters). For the analysis of internal forces has been assembled spatial bar shaped model. Cladding is made of Kalzip system.