Universiẗat, Diss., 2005--Frankfurt (Main).

Univ., Diss., 2005--Kassel

As economic inequality in the United States continues to increase, the ways in which Americans cope with and conceptualize the issue itself as well as the disadvantaged groups affected by it has become increasingly salient features of their political attitudes. While important research has been done, particularly by Bartels (2009), showing that Americans share widespread consensus that economic inequality is a negative feature of American society and that Americans do not harbor any innate antipathy towards the poor, more work needs to be done to understand what activates Americans’ sympathy for the poor. This study, building on Burden and Klofstad’s (2005) assessment into the effects of cognitive and affective priming, seeks to understand how issue and subgroup framing alters political expression. I find that the use of the word “feel” in survey questions—as opposed to the word “think”—makes respondents more likely to hold poor subgroups less accountable for their economic circumstances. However, this differential outcome does not manifest when applied to policy-based questions. This indicates that invoking person- or group-based arguments along with affective signifiers shows the best promise for activating sympathy for the poor among Americans.

In order to make good decisions about the design of information systems, an essential skill is to understand process models of the business domain the system is intended to support. Yet, little knowledge to date has been established about the factors that affect how model users comprehend the content of process models. In this study, we use theories of semiotics and cognitive load to theorize how model and personal factors influence how model viewers comprehend the syntactical information of process models. We then report on a four-part series of experiments, in which we examined these factors. Our results show that additional semantical information impedes syntax comprehension, and that theoretical knowledge eases syntax comprehension. Modeling experience further contributes positively to comprehension efficiency, measured as the ratio of correct answers to the time taken to provide answers. We discuss implications for practice and research.

The dissertation dealt with sowing annuals in the establishment of flowerbeds from direct sowing of taxon which are potentially suitable for autumn and spring sowing. In the experimental part was attempted to annuals of direct sowing. There were realized three sowings, in autumn 2013 and 2014 and in spring 2014, when were sown 26 same taxon of the seed. The aim of the experiment was evaluated the germination of seeds, height and flowering taxon, aesthetic effect of fetus, effect of taxon in the composition and suitability growing and seeding taxon. Based on all these results there were performed the comparison and evaluation and the conclusions and recommendations were defined for following experiments and practice. After evaluation all the results, interesting and perspective annuals for directautumn sowing appeared Ammi visnaga (L.) Lam., Bupleurum rotundifolium L., Clarkia pulchella Pursh. 'Mix', Consolida ambiqua (L.) P. W. Ball & Heywod. 'Hyacintokvětá', Nigella damascena L. 'Cramer s Plum', Nigella orientalis L., Papaver rhoeas L. 'Shirley Double Mixed'. There were evaluated the best and the most perspective annuals for direct spring sowing - Borago officinalis L., Bupleurum rotundifolium L., Calendula officinalis L. 'Pacific Beauty Směs', Consolida ambiqua (L.) P. W. Ball & Heywod. 'Hyacintokvětá', Cosmos bipinnatus Car. 'Sonata', Cosmos sulphureus Car. 'Redcrest', Nigella damascena L. 'Cramer s Plum'..

This diploma thesis deals with home preparation for teaching physics at basic school by simple experiments. Set of worksheets with didactic analysis and evaluation of a questionnaire survey of attitudes pupils and parents of this theme. The worksheet is possible use in education of physics on basic school. Conclusions of questionnaire survey give an answer about appropriateness of home experiment by physics education from the perspective pupils and parents.

Abstract This dissertation is thematicly focused on oscillation, wave and acoustics. The goal of this work is to certified suitability of experiments in the physics lessons on the elementary school. There are different kinds of experiments, which are suitably put into lessons. These experiments help pupils to understand the subject matter. A part of the work is also draft of kit to demonstrate experiments which are carrying out during the physics lessons. The dissertation contains a set of experiments with this kit. To check out precondition, that putting experiments is suitable activity during the lessons are here suggested and in practice verified worksheets. The analysis of these worksheets is the conclusion of this dissetation.

Made available in DSpace on 2014-06-11T19:35:41Z (GMT). No. of bitstreams: 0 Previous issue date: 2003Bitstream added on 2014-06-13T20:46:44Z : No. of bitstreams: 1 rabelo_erc_dr_guara.pdf: 6183140 bytes, checksum: d7bd9eecbf970b1f0de95902bb7fa5b8 (MD5) / Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) / Este trabalho trata da combustão sem chama, denominada incandescência, em espécimes de madeira. O estágio de incandescência é muito comum em queimadas florestais, ocorrendo após o período de chamas, quando a biomassa de tamanho maior permanece fumegando por até vários dias. Este material, em estado de incandescência, é foco permanente de emissão de gases tóxicos bem como de re-ignição de biomassa não queimada. Os objetivos principais do trabalho são: verificar experimentalmente os parâmetros que favorecem o início e a continuidade do processo de incandescência e quantificar as concentrações de CO, CO2, O2 e HC durante a queima. Também serão determinadas temperaturas, em diferentes pontos dos corpos de prova, a velocidade da frente de incandescência e, finalmente, a taxa de queima. Os ensaios foram feitos em um forno de 1,80 m de comprimento por 0,60 m de diâmetro, conectado a um controlador de temperatura, com vazões de ar de combustão previamente estabelecidas. Além da vazão de ar, outros parâmetros também variaram, como a temperatura interna do forno, a espécie da madeira, o volume e a umidade da amostra. Para otimizar a execução dos testes foi aplicada a técnica de Projeto de Experimentos. Os ensaios de laboratório foram comparados com os resultados obtidos em uma queimada realizada no interior da floresta Amazônica, no norte do estado de Mato Grosso. / This work investigates non flaming combustion in biomass logs. The process is called smouldering combustion. The occurrence of smouldering is very common in forest fires, where the large sized biomass remains fuming for several days. The material in the state of is a source of toxic gases and of ignition for unburned biomass. The main goals of the work are experimentally check the parameters that favor initiation and permanence of the smouldering process and measure CO, CO2, O2 and HC concentrations during the burning. The velocity of the smouldering front was determined by thermocouples placed in different points of the biomass sample. The average burning rate was also determined. The tests were performed in a furnace of 1.80 m length by 0.60 m diameter. A temperature controller was used to set the desired furnace temperature. The mass flow rate of air was controlled by valves and measured with rotameters. Tests were conducted for different biomass species and sample volumes and moisture contents. To optimize the number of tests the technique Project of Experiments was applied. Results of the laboratory tests agreed well with those obtained in the Amazon forest, in the north of the state of Mato Grosso, Brazil.

Two topics related to the experimental design are considered in this thesis. On the one hand, the uniform experimental design (UD), a major kind of space-filling design, is widely used in applications. The majority of UD tables (UDs) with good uniformity are generated under the centralized {dollar}L_2{dollar}-discrepancy (CD) and the wrap-around {dollar}L_2{dollar}-discrepancy (WD). Recently, the mixture {dollar}L_2{dollar}-discrepancy (MD) is proposed and shown to be more reasonable than CD and WD in terms of uniformity. In first part of the thesis we review lower bounds for MD of two-level designs from a different point of view and provide a new lower bound. Following the same idea we obtain a lower bound for MD of three-level designs. Moreover, we construct UDs under the measurement of MD by the threshold accepting (TA) algorithm, and finally we attach two new UD tables with good properties derived from TA under the measurement of MD. On the other hand, the problem of selecting a specific number of representative points (RPs) to maintain as much information as a given distribution has raised attention. Previously, a method has been given to select type-II representative points (RP-II) from normal distribution. These point sets have good properties and minimize the information loss. Whereafter, following similar idea, Fu, 1985 have discussed RP-II for gamma distribution. In second part of the thesis, we improve the discussion of selecting Gamma RP-II and provide more RP-II tables with a number of parameters. Further in statistical simulation, we also evaluate the estimation performance of point sets resampled from Gamma RP-II by making comparison in different situations.

O presente trabalho foi desenvolvido com o intuito de verificar a influência do efeito escala na variação da forma da curva tensão-deformação e na resistência de duas rochas brasileiras: o arenito silicificado da Formação Botucatu e o basalto da Formação Serra Geral. Para tanto, foram executados ensaios de flexão a três pontos, com controle do processo de fraturamento, em amostras de ambas as rochas. Os ensaios foram conduzidos sobre quatro tamanhos diferentes de corpos de prova. Experimentalmente, não foi observada variação na forma da curva força-deslocamento com o tamanho das amostras. Observou-se também que a variação da resistência em função dos tamanhos das amostras aproxima-se do previsto pela Mecânica da Fratura Elástica Linear. As curvas força-deslocamento obtidas experimentalmente foram comparadas com duas outras curvas obtidas numericamente, uma através de simulações baseadas na Mecânica da Fratura Elástica Linear, e outra com base na teoria do Modelo Coesivo de propagação de fraturas em análise não linear. Os dados obtidos mostram que entre as duas simulações numéricas a que apresenta melhor aproximação à simulação experimental é a do Modelo Coesivo e que ambas subestimam os deslocamentos no trecho pós-ruptura dos ensaios. / This present work has been developed aiming to verify the scale effect influence on the stress-strain curve form as well on the strength of two Brazilian rocks: Botucatu sandstone and basalt from Serra Geral Formation. Using samples of those rocks three point beam bending experiments have been made in with the crack displacement opening mouth was controlled. The experiments have been conducted using four different samples size. In the experiments no variation in the form of the force-displacement curve has been observed considering those chosen samples sizes. The rock strength variation for those samples is approximately the one predicted by the Linear Elastic Fracture Mechanics Theory. The force-displacement curves experimentally achieved were compared with two other curves obtained numerically, one using the Linear Elastic Fracture Mechanics Theory with FEM and other assuming the fictitious Cohesive Crack Model with BEM. It has been verified that among the two numerical procedures the Cohesive Crack Model gives better results and both give smaller displacements after the rupture.