Este trabalho pretende contribuir para o avanço nos estudos de parâmetros e procedimentos objetivos para avaliação estética de superfícies de concreto aparente e de materiais para preenchimento de lacunas neste material, de forma a atender requisitos especificados em projetos de conservação de edifícios modernos. Como objeto de estudo foi escolhido o Edifício Vilanova Artigas, sede da Faculdade de Arquitetura e Urbanismo da Universidade de São Paulo, obra arquitetônica que apresenta as características que motivaram o assunto abordado. Pautada pelas diretrizes de conservação do patrimônio construído defendidas por entidades como o Conselho Internacional de Monumentos e Sítios, a reparação dos danos dessas superfícies deve manter a unidade estética da obra, reconhecida por sua cor, textura e forma. O trabalho experimental possibilitou a comparação entre as superfícies do concreto original e de amostras de argamassas cimentícias, elaboradas com diferentes traços, pigmentos, aditivos e proteção superficial. As avaliações de aparência se basearam em métodos comparativos de dados colorimétricos no sistema CIE L*a*b* e por método perceptual com base em escala tonal. As investigações de textura foram feitas com materiais aplicados sobre as superfícies das argamassas frescas e as de geometria por estudo analítico para reparos nas empenas do edifício estudado. / This work intends to contribute to the advancement in the study of objective parameters and procedures for aesthetic evaluation of apparent concrete surfaces and materials to fill gaps in this material, in order to meet the requirements specified in conservation projects of modern buildings. The object of study was the Vilanova Artigas Building, headquarters of the Faculty of Architecture and Urbanism of the University of São Paulo, an architectural work that presents the characteristics that motivated the subject. Guided by the guidelines of conservation of the built heritage defended by entities like International Council of Monuments and Sites, the repair of the damages of these surfaces must maintain the aesthetic unity of the work, recognized by its color, texture and shape. The surfaces of the original concrete and samples of cement mortars, elaborated with different mix design, pigments, additives and surface protection were evaluated. The appearance evaluations were based on comparative methods of colorimetric data in the CIE system L * a * b * and by perceptual method based on tonal scale. The texture investigations were made with materials applied on the surfaces of the fresh mortars and those of geometry by analytical study for the conservation of the studied building.

The main goal of this project is trying to understand how a modern church looks like. If it follows the same principles like traditional churches and or weather the new liturgy needs new idea of nowadays signs. What affects the religious architecture, weather it's designed in a context of a intense housing developement.

Diploma thesis Ponava Centre is solving the architectonic study of Leisure centre. Area is situated in locality Ponava – Brno, Královo Pole. Leisure centre should provide its services to wide spectrum of visitors. Those activities does not have to be undertaken just in the building itself, but the idea to develop and utilize for those purposes the public space around it is suggesting itself. The centre is offering the activities for people of all age categories. It can provide the leisure function and also both educational and commercial function. In this spirit the inner space of the object is divided. The basic principle is to group together the three masses according to their most important functions, which are located in the object.

The diploma thesis follows up on the bachelor thesis and deals with the issue of light-transmitting concrete LTC. The aim of thesis determines the transparency and its decrease due to durability. The terotical part deals with extension of LTC issues and follows up reserch from bachelor thesis. The teory is also focused on the issue of glass optical fibers. The experimental part deals with the influence of selected durability test on transparency of LTC. Transparency is determined by mesuring devise called black box. In the conclusion is summarized influences witch affects transparency and evaluation of whether the selected fibers are suitable for outdoor use.

The design of the Church “Seslání Ducha Svatého” with the spiritual center in Líšeň, Brno answers the question: "How should the contemporary church look like?" Analysis of the site, awareness of the character and requirements of today's time, historical and cultural continuity and liturgical changes of the last century gave rise to 7 points of the architecture of the new church. This program describes the new liturgy, defines the form of the subordinate community of believers, characterizes the work with the material envelope of the inner space, establishes the relation between the horizontal and the vertical and the curved and rectangular, explains the theme of orientation and work with the interior. The final urban and architectural solution is based on these assumptions. The spiritual center, consisting of a multifunctional hall, a classroom, a club-room, a rectory, a cafeteria with a library, and underground garages with technology, is geometrically rigid, layered and precisely fitted, while church is completely different in its shape and scale, indicating functional and sacral differences. The abstract form of the church refers to the inviolability of God. The interior of the Church is a place of silence, a pure and noble space, formed by higher order principles. Another important way of expression becomes light as the creator of the spiritual space. An important part of the proposal is also the principle of organizing a church with a spiritual center around the inner square opened to the south by a wide entrance staircase.

The content of the diploma thesis was an architectural study of a sacral building in Brno - Líšeň. The subject of the study was the elaboration of an ideological design of a sacral complex, which consisted of a church and a parish. The main operator of the whole complex will be the Salesian community, whose background is in close proximity to the area. The basic idea of the design was to design a spiritual place, which in its form conveys clear information about the use of the object and at the same time supports the development of ideas of the Salesian community. It is a structure that conveys the mission itself, not by one element, but by a set of several elements that together create a story, vision, mission. The ideological solution in this case thus becomes an equilateral triangle, which symbolizes the Father, the Son and the Holy Spirit. With its dominant vertical direction facing the sky, the object symbolically points to the spiritual path and self-realization. The given area is solved as a complex, the elements of which complement each other and thus create a harmonious whole. The design creates a space for both liturgical celebrations in the interior and exterior, which is used by the outdoor presbytery, which is complemented by residential stairs. These elements are intended to encourage residents to meet and establish friendly relations.

This thesis solves design and project of construction of training and education centre, contains library, classrooms and administratice facilities. The building is set into a former allotment gardens on outskirt of Brno. The project reclaimed this land. The shape of the bulding is created by two connected curves, it reminds wide open letter "U". There are two buildings connected with glass vestibule, the object is partially sunk below ground. South side of the building consists of a double transparent facade, which contributes to energy savings, the northern facade is clad with wooden battens. Underground constructions are made of concrete, pillars and horizotal structures are made of laminated wood. Green roof is transferred underground on the west and east side of building. In the interior alternates exposed concrete and laminated wood.

Master’s thesis deals with complete project documentation of newly built object of library and mediatheque located on the site in České Budějovice. It is a three-storey building divided into three parts, one-storey, two-storey and three-storey. It is partly basement. The underground part is devoted to main storage spaces of library services, management offices and social facilities for staff (toilets, changing rooms, washrooms). This part of the building has own entrance for employees. In the 1st floor is located the main library area along with exhibition spaces and the main entrance for visitors with self service cloakroom. In the 2nd floor are designed library spaces for visually impaired persons with fund of audio books, CDs and DVDs, a lecture hall with a projector and own kitchen and space for reading magazines and periodicals. From this floor is possible access to the outdoor terrace, which has own terrace furniture store nearby. In the 3rd floor is located a literary café with its own facilities. In each floor are also designed sanitary facilities for use by persons with limited ability of movement and orientation. All floors are connected by stairs and passenger lifts. In terms of construction, the building is designed as a frame, in the underground parts made of reinforced concrete, the overhead of glued laminated timber elements. The ceiling structure designed over the underground floor is monolithic reinforced concrete slab. The ceilings in the upper part are designed as a wooden beamed made of the glued laminated timber elements. The building has a pent roof created by wooden trusses assembled with punched metal plate fasteners. The foundations are designed as belts and footings. The study, detailed documentation, thermal-technical evaluation of selected structures and fire safety of the building are processed. For processing of the thesis were used software AutoCAD 2010, Teplo 2011, Area 2011, Ztráty 2011 and Fire NX 802 PRO.