Annotation The aim of the thesis is new-building design of mixed-use building in cadastral of community Nové Mesto nad Váhom. Building is situated at free estate in the marginal of community. Building estate must have new feeder road built. In front of building will be the parking area. The mixed-use building is detached and four-storied building. At basement is situated underground garage for ten cars and store houses for flats. At first floor is situated cafe and commercial space. Cafe has kitchen, stock rooms and WC. Commercial space has staff facilities and sales area. One of the shops has back door to stock room. Parking space for staff is next to building. At second and third floor is situated eight flats. Four flats has 3 rooms and four left has 2 rooms. Each flat has got stock room, WC and bathroom. In each flat is situated entrance to the terrace. Terrace is on extensive green roof orientated to southwest. In the flats is kitchen together with living room because of bigger space. Floor in the flats is combination of ceramic tiles and laminated floor. Area with flats has a lift. Concrete foundations are on micropiles. Project is set up with system LIVETHERM building has heat cladding. At the building are plastic windows and colour is matching with facade. Foothpath around building are from interlocking pavement. Whole documentation is prepared to realization of building. Drawing documentation is prepared by software AUTOCAD.

The thesis solves the project of a kindergarten in the field of inclination 7%. The kindergarten is located on the plots number 570, st. 373, st. 374 in the village Vrané nad Vltavou. The building has two floors and one basement. The kindergarten is for 60 children and for 11 employees. The building serves as a preschool institution for raising children. The supporting structure consists of a precast concrete frame supplemented in the basement by a cast-in-place wall and a foundation slap. External walls and partitions form sand-lime bricks Sendwich. The external walls are completed with Orsilt TF Profi mineral insulation th. 280 mm. The floors are made of prestressed concrete floor slabs Spiroll PPD 256 th. 250 mm supported by T and L primary beams. The building ends with a could extensive green roof. The slope and space for the blow-in insulation Climatizer Plus uses Steico Joist 400 I-beams. Windows are wooden frame Optiwin Purista and doors are Optiwin Entrada.

The aim of the master thesis is to design nearly zero-energy building of the municipal office in the city of Bojkovice. In the first part an architectural and constructional solution was designed. The building has three above-ground floors. It has a flat green roof with skylights and photovoltaics. First floor includes reception, break room, archives, offices, meeting room, kitchenette, sanitary facilities and boiler room. Second floor consists of break room, archives, storerooms, offices and sanitary facilities. External load-bearing walls, internal load-bearing walls and partitions are made of ceramic blocks. Columns, girders, floor slabs and roof slabs are made of monolithic reinforced concrete. Cladding is insulated with ETICS. In the second part HVAC was designed. Heating is provided by gas condensing boiler. The building is mechanical ventilated by AC units situated in technical room in the third above-ground floor. Cooling is air-conditioned by fan-coil units designed in offices and conference hall, chillers are situated on the roof. The third part of the master thesis focused on design and comparison of various AC units. Drawings are processed in SW AutoCAD, calculations were made in Excel, the design of air-conditioning system and unit was made in SW Atrea DUPLEX 9.10, Aerocad and CLIMACAL.

The aim of my thesis is to design new Guest house in Čeladná. First part is focused on building design and construction. Second part is focused on heating, ventilation and air conditioning (HVAC) design and renewable energy sources. Third part is focused on detailed solution of noise and vibration from the environment around building. Guest house is three – storey building but there is one more underground storey for technical facilities. Ground floor contains staff facilities, restaurant, entrance hall with stairs and office. On the second floor we can find four guest rooms with terrace and corridor. On the third floor we can find three guest rooms. Heating in the building is secured by gas condensing boilers. Ventilation is provided by two air condition units. Each guest room has radiators and cooling distribution units and ventilation. Cooling is secured by one cooling unit on the green roof. On the gable roof we can find 75 photovoltaic panels. Third part is focused on detailed solution of noise, vibration from the environment around building and spatial acoustics of guest room. The thesis is carried out in AutoCAD, Sketch up, Lumion and DEKSOFT software. All structures comply with the valid standards and regulation.

The task of the master project is to design a single-storey kindergarten with flat extetensive green roof in Chvalčov. The building contains entrance hall, utility room, locker rooms, toilets, kitchen, school canteen, staff rooms, storage room and play rooms. The Building is divided into two similar parts. The vertical loadbearing structure is designing from ceramic blocks. The horizontal loadbearing structure is designed from reinforced concrete. The building is heated by a ground source heat pump supplying heat to floor heating. Another source of heat for the preparation of hot water and heat exchanger in the air handling unit is a gas condensing boiler. The heat pump in reverse operation cool the building via Fan-coil units. For air distribution is designed galvanized ducts and air handling units. The building uses photovoltaics to produce electricity for safe environment when using a renewable energy source and safe money when they no need buy energy from elektricity distribudion networks. The designs were elaborated in Revit, autocad and thermal assessment in Deksoft and similation 2018

The subject of the diploma thesis is the elaboration of project documentation for the construction of a kindergarten in Brno. The main entrance to the building is oriented to the north. The building is L-shaped and is designed as a two-storey, partly basement. There are 3 classes with a total of 72 children. External and internal load-bearing masonry of the above-ground floors is designed from ceramic blocks of thickness 300 mm. The basement masonry is then made of concrete blocks th. 300 mm cast in concrete. Internal non-load-bearing masonry made of ceramic blocks th. 115 mm. The insulation of the building is designed as a certified contact insulation system of EPS material. The horizontal load-bearing structures are designed as a ceramic prefabricated rib-and-filler floor with concrete grout. The stairs are designed as reinforced concrete monolithic. The roof is warm flat roof with an extensive vegetation layer.

The subject of this master’s thesis is a project documentation for development of a nursery school. The nursery school is situated on the outskirts of the city Příbor. The school is designed as a two-storey building and includes 4 classrooms, with total capacity reaching 60 pupils. The perimeter wall consists of Porotherm clay block walling system. The ceiling framework uses a combination of two systems; the prestress hollow core slabs Spiroll and reinforced concrete monolithic blocks. The roof is designed as a single skin cladding with a flat, green roof. The external thermal insulation composite system (Etics) is proposed for the insulation of the building. The outer walls are partially cladded with timber. Additionally, the combination of white rendering and timber cladding will form a modern looking building that fits within a new housing development. Furthermore, the plan includes an outside playground, with allotments and parking spaces on the premises for the use of a nursery school.

The aim of the diploma thesis is processing of the design documentation for realization of the construction of a kindergarten in Havlíčkův Brod. It is a detached single-storey building that is functionally divided into three basic parts – the middle one, that contains a canteen with a preparation area and a serving hatch of food, and two connected side parts, left one and right one, each one of them is used as a classroom of the kindergarten with capacity up to 20 children for each class. The structural system of the building is created by a masonry system made of hollow bricks. The floor structure is designed of prefabricated prestressed concrete floor slabs, the roofing of the building is made of warm flat roof with extensive green vegetation covering. The external wall is supplied by ventilated facade which one is created by contact thermal insulation and by facade cladding of cement-bonded particle board. The building is set in a lightly sloping terrain.

This master thesis describes the design of a detached two-storey home for the eldery in Holešov with seventeen apartment units. The thesis includes architectural and structural designs, concept of technical systems and assessment of the building’s energy performance. The last part of the master thesis is about the vegetated roof water-balance. On the first floor there are facilities, canteen, a doctor´s office, a caretaker´s office, hairdresser´s and pedicure, buffet, tool storage and eight apartment units (1+kk – seven flats, 2+kk – one flat). On the second floor there are caregiver´s office, rehabilitation room, common room with library, and nine apartment units (1+kk – seven flats, 2+kk –two flat). The building has concrete foundations. Loadbearing walls are made of ceramic blocks. Floor structures and staircase are designed from cast-in-place reinforced concrete. The building is covered with a flat extensive green roof. The envelope is insulated with ETICS. There are nineteen parking spaces on the plot. The drawings were elaborated in AutoCAD software.

The thesis solves the project of a kindergarten in the field of inclination 7%. The kindergarten is located on the plots number 570, st. 373, st. 374 in the village Vrané nad Vltavou. The building has two floors and one basement. The kindergarten is for 60 children and for 11 employees. The building serves as a preschool institution for raising children. The supporting structure consists of a precast concrete frame supplemented in the basement by a cast-in-place wall and a foundation slap. External walls and partitions form sand-lime bricks Sendwich. The external walls are completed with Orsilt TF Profi mineral insulation th. 280 mm. The floors are made of prestressed concrete floor slabs Spiroll PPD 256 th. 250 mm supported by T and L primary beams. The building ends with a could extensive green roof. The slope and space for the blow-in insulation Climatizer Plus uses Steico Joist 400 I-beams. Windows are wooden frame Optiwin Purista and doors are Optiwin Entrada.