Master’s thesis theme is mountain hotel project. The hotel has one lower basement and four aboveground floor. It has trditional look and the roof is double-pitched. Floor projection looks like letter "L". Main part has measurements 25,3 x 14,1 m and it has four floor. Extension is on northwest side of main part. It has measuremnts 11,85 x 9,5 m and three floor. Facede of basement and first floor is from stone facing mansory. Facade od second floor of main patr of buildings id timbered looks like curb. Third and fourth floor are attic, gable is vertical timbered. Facade of second floor of extension is plaster on ETICS. The gable od extension is vertical timbered. Roof covering is alpen shingle from larch wood. Foundations of house are shallow. The construction system is walled. The lower basement is built from masonry BS Klatovy BD30 and other wall are from masonry Porotherm . Floor structures are from monolithic reinforced concrete, thickness 220 mm. House stairs are prefabricated double-flight. Partition wall are mostly built from mansory Porotherm 11,5 P+D. Lintols above windows and doors in facadeare made by reverse of floor slab and inside of disposition are made by ceramics lintols Porotherm. Floor structures are floating with impact insulation in whole house. In living rooms wear layers are from oak parquet block and in common rooms, toilets, bathrooms and technical rooms is ceramics paving. Wall’s surfaces are made from patent plaster and in lower basement are made from two-coat work with white coat. Toilets and bathrooms are tilled with ceramic tiles. All distributions of building equipment are covered with gypsum plasterboard ceiling. All windows and doors in facade are made by wooden profile Solid comfort SC78 and glazed by triple glazing unit (Uw,max=0,9 W/m2.K), exception is main entrance door, It is made by aluminum profile and it is automatically opened.

Diploma thesis designs a barrier free new building of medical devices – policlinic (health center) with 14 medical workplaces. Object has three floors and basement. The building is covered by a vegetation flat roof. Building of policlinic is based on strip foundations and load-bearing walls are made from sand-lime blocks. Horizontal systém is created like reinforced concrete ceiling and in the same way internal staircase. The building is design at passive architecture – have compact form, thick layer of insulation and airtight cover. The main glass facade is oriented to the sout. There is used heat recovery air conditioning and heat pumping for heating in building. Health center satisfy currently legislation.

This Master’s thesis deals with the design and elaboration of project documentation for the construction of a multifunctional building in Pardubice. The building is located on plots No. 2426/35 and 2426/36, in the cadastral area of Pardubice. It is located in an area close to the city center. There used to be barracks in this place. The outline of the house is "bitten" L-shaped. The building consists of civic amenities, where there are Alza showrooms, musical instrument showrooms, cafes, rehabilitation centers and massage centers. Another part are offices. All floors are barrier-free. The building has no basement. The main arterial communication of the house passes through the hall, which goes diagonally through the building. This corridor connects the individual establishments, technical facilities, stairs, elevator, and parking lot behind the building. Movement between individual floors is ensured by a monolithic staircase and an elevator. The building also includes a parking area for cars, access road and another garden with space for outdoor seating. The building is based on strip foundation and pad footing foundation made of plain concrete. The load-bearing structures are made of ceramic and brick blocks and columns. The building has a longitudinal compositional system. The ceilings are designed as reinforced concrete slabs. The exterior walls are plastered with thermo-insulating plaster. The walls in the roof entrance section are contact-insulated with mineral wool. In the place of the plinth, the insulation is made through extruded polystyrene. The roofing is designed as a single-skin flat roof with rainwater outlet/roof outlet. Next to the land there is a local road.

The final thesis is focused on the design and elaboration of the project documentation of the sports and relaxation center. The proposed building is located in the south-eastern part of the town of Hradec Králové, in a location supposed for buildings and areas of sports and relaxation use. It is a three-storey building with a flat roof and partial basement. The construction system is wall-mounted with a combination of skeleton. The building is based on plain concrete and reinforced concrete foundation footing. The peripheral, supporting and partition walls are designed from ceramic blocks POROTHERM. The inner load-bearing elements consist mainly of reinforced concrete columns. The ceiling structure is designed from reinforced concrete slabs supported locally. The perimeter walls of the first overground floor and part of the perimeter walls of the basement are insulated by an external contact thermal insulation system. The thermal insulation of the perimeter walls of the second floor is designed by means of a ventilated facade with facade tiles except the squash courts and the relaxation area. The building is functionally divided into three main parts, where the central part forms an entrance hall with comunication spaces of all floors. In this part a basement with technical facilities is designed. The right part of the ground floor consists of a restaurant with a bowling alley and a kitchen with storage and hygienic facilities. As part of this section, a gym and exercise rooms for fitness exercises, spinning and TRX are designed on the second floor. The left part consists of two squash courts with the appropriate facilities and massage areas. There is also a relaxing facilities with a north-facing terrace on the second floor. There are also dressing rooms and hygienic facilities. The designed object is accessible for disabled people. There is a parking lot for 40 cars, 3 motorcycles, one bus and three barracks for cars.

The aim of this thesis is to elaborate project documentation for new construction of low-energy residential building with 16 luxury apartments, apartment without barriers and with pharmacy of basic type. It is a four-storey detached building without basement, with flat roof, roof terraces and with balconies. Residential building is located in one of the most enjoyable parts of the city of Zlín – Jižní Svahy II in the vicinity of Central park with bicycle path and with beautiful view of the Zlín. The building will be located on land plot No. 2144/46, where is still situated unfinished building "Torso" from the late 80 years. The residential building is designed in brick system Heluz, ceiling construction is made up of prestressed hollow core slabs, perimeter walls are with external thermal insulation composite system and external doors and windows are made of plastic and aluminum with triple glazing. For heating and water heating will be utilized renewables energy, such as heat pump and solar collectors. Residential units with three residential rooms are designed with a forced ventilation by means of ventilation units with heat recovery. The building also uses modern shielding elements such as outdoor blinds and horizontal sun breakers. The part of the project are also disposition studies, seminar work and energy part.

The thesis is focused of proposal and procesing of project documentation Center for waterskiing. The proposed object is located in the western part of the town Soběslav, in the locality aimed at sports activities. The building is created of facilities for summer sports, especially water skiing and wakeboarding. Further there will be built a playground for ball sports and track on roller skates. This is a three-storey no with a cellar object with a flat roof. The object is based on the foundation reinforced concrete pads a strips. The first floor is bricked of permanent formwork and partly of cast in place structure. The second and third floors is designed of clay blocks POROTHERM. This masonry is insulated with the aid of external contact thermal insulation. In the western part of the building is designed ventilated facade. The floor structures is designed from prestressed reinforced concrete panel SPIROLL and partly from reinforced concrete slabs. The object is divided into several operating units. They are the gym and its facilities, restaurant with kitchen, facilities for employees and the necessary storerooms, coffeehouse, shop with sporting equipment, rental equipment for water skiing and a dressing room serving the outdoor sports. The essential part of the second floor is comprised outdoor terrace. From this terrace is allowed entry to the coffeehouse, restaurants, shops and on the main staircase.

The subject of this thesis is the design and project documentation of a new multifunctional house in Strakonice. The building has four floors, without basement, and is located on a slightly sloping land in the suburban part of the town of Strakonice. It is based on shallow foundations and covered with a flat roof. It is a transverse wall structural system, build with clay block masonry, with the semi-assembled ceiling structures of ceramic and concrete beams and inserts. It is conceived as a double-aisle layout. The ground floor of each wing consists of the establishment of shops and house facilities. The overground floors are designed as six residential units of varying size category. Both tracts have separate entrances to both the residential portion and to individual businesses. The building is designed from traditional building materials. In addition to the architectural construction and civil-engineering design, a part of this project is also a fire safety design and an assessment from the perspective of building physics.

The goal of the thesis is firstly to get all the information about the initial state of solved block of flats, which is located on the street Merhautova 76/954 in Brno – Černá pole, in terms of constructions, energy consumption and initial state of heating system. In the second part of the thesis, where are discussed the possibilities of reduction of energy consumption, variant drafts of reduction of energy consumption and their financial costs and the choice of optimal variant. Third part deals with assement of solved block of flats in terms of sustainable built environment by using tool to rate buildings in terms of sustainable built environment - SBToolCZ, evaluation of possibility to use renewables. In the end are written summaries and recommendations.

This thesis deals with the design and elaboration process of a project documentation of a sports centre. The designed sports centre building is situated in the southern part of the town of Polička, in the area determined for sports and free time activities complexes and areas. It is a two-floor, non-cellar, flat-roof building. It is based on plain concrete strip foundations and reinforced concrete foundation footing. The bearing, peripheral and partition walls are designed from POROTHERM hollow clay blocks. Reinforced concrete columns are designated in open disposition areas. The ceiling construction is made from SPIROLL pre-stressed concrete floor slabs and point-supported reinforced concrete slabs. The peripheral walls of the first aboveground floor are insulated with external thermal insulation system with a protective gabion facade. The peripheral wall thermal insulation in a bowling restaurant and gym halls extension is designed from a ventilated facade with CEMBRIT METRO facade cladding panels. The building is functionally divided into two main parts with a shared entrance. The sports centre with gyms and other sports facilities form the first part. Three squash courts, a mini-football piste, a special room for spinning and alpinning, a room for group exercising and cloakrooms with sanitary facilities are designed within one part of the sports centre. A restaurant with a bowling area and a kitchen with storerooms and other facilities for employees form the second part. The designed complex is barrier-free. There is aimed to be a car park for fifty cars, four motorbikes and a bus in front of the building. Three parking places are for disabled people.