Spelling suggestions: "subject:"FBG fabrication"" "subject:"FBG abrication""
1 |
Fiber Bragg Grating Interrogation SystemsYamdagni, Sumeet 01 1900 (has links)
This thesis work deals with the development of three different categories of interrogation techniques for Fiber Bragg Grating based sensor networks. Such networks are used for structural health monitoring and other applications.
A bulk grating based interrogation system is described first, which includes an optical source, switch, circulator, embedded controller, and software. The center wavelength determination technique employed is detailed and is shown to be highly accurate from test data. The comparison with resistance strain gauges is presented which shows that the system developed provides an accurate strain reconstruction. The system is also compared with a commercial optical spectrum analyzer and is found to exhibit good accuracy and fidelity. The system has been field tested on an aircraft structure with 14 sensors spread over 4 channels. Strain data reconstruction from these tests is shown to accurately reproduce the loading conditions.
A second system developed is based on the matched filter technique using a mechanical fiber stretcher; the details of this system are presented with a mathematical treatment of the technique. The design of the fiber stretcher is also described. This design is regarded to be novel since it tries to provide large interrogation bandwidths using a parallel topology. The results of tests have shown good resolution and comparative tests with resistance strain gauges have shown accurate reproduction of strain.
Finally, an interrogation system based on a wavelength tunable source is presented. This system is a precursor to a time division multiplexed interrogation system, which has also been described. Three laser configurations have been set up and characterized. The laser sweep tests have been performed on two configurations and a sensor grating reconstruction test has also been carried out.
|
2 |
All-Fiber Sensing Techniques For Structural Health Monitoring And Other ApplicationsMadhav, Kalaga Venu 09 1900 (has links)
In this thesis, we explore the four aspects of fiber Bragg grating sensors: mathematical modeling of Fiber Bragg Grating response/spectral characteristics, fabrication using phase mask, application and interrogation. Applications of fiber Bragg gratings, also known as in-fiber gratings, with emphasis on their sensing capabilities, interrogation of an array of sensors and their performance in structural health monitoring scenario are documented.
First, we study the process of photosensitivity phenomenon in glasses, in particular GeO2:SiO2 glasses. For mathematical modeling we consider the 1-D refractive index profile along the propagation axis of an optical fiber drawn from the preform of such glasses. These 1-D index structures exhibit a bandgap for propagation along the fiber axis. We show how the bandgap is dependent on the two structural parameters: index periodicity and effective refractive index. The mathematical model provides the characteristics of three sensor parameters -resonance wavelength also known as the Bragg wavelength (λB ), filter bandwidth (ΔλB ), and reflectivity (R). We show that the evolution of the index structure in germanosilicate glasses is dependent on the inscription parameters such as exposure time, intensity of the laser used for inscribing, the interference pattern, and coherence of the laser system. In particular, a phase mask is used as the diffffacting element to generate the required interference pattern, that is exposed on the photosensitive fiber. We present a mathematical model of the electromagnetic diffraction pattern behind the phase mask and study the effect of the limited coherence of the writing laser on the interference pattern produced by the diffracting beams from the mask.
Next, we demostrate the sensing capabilities of the fiber Bragg gratings for measuring strain, temperature and magnetic fields. We report linearity of 99.7% and sensitivity of 10.35pm/◦C for the grating temperature sensor. An array of gratings assigned with non-overlapping spectral windows is inscribed in a single fiber and applied for distributed sensing of structural health monitoring of an aircraft’s composite air-brake panel. The performance of these sensors is compared with the industry standard resistance foil gauges. We report good agreement between the two gauges (FBG and RSG).
In some applications it is more desirable to know the spectral content, rather than the magnitude of perturbation. Fiber Bragg gratings sensors can be used to track events that occur in a very small span of time and contain high frequencies. Such applications demand very high speed wavelength demodulation methods. We present two interrogation techniques: wavelength-shift time-stamping (WSTS) and reflectivity division multiplexing (RDM). WSTS interrogation method employs the multiple threshold-crossing technique to quantize the sensor grating fluctuations and in the process produces the time stamps at every level-cross. The time-stamps are assembled and with the a priori knowledge of the threshold levels, the strain signal is reconstructed. The RDM methodology is an extension of the WSTS model to address multiple sensors. We show that by assigning unique reflectivities to each of the sensors in an array, the time-stamps from each of the sensors can be tagged. The time-stamps are collected by virtue of their corresponding pulse heights, and assembled to reconstruct the strain signal of each of the array sensor. We demonstrate that the two interrogation techniques are self-referencing systems, i.e., the speed at which the signals are reconstructed is instantaneous or as fast as the signal itself.
|
3 |
Development of Fiber Bragg Grating Sensor Based Devices for Force, Flow and Temperature Measurement for Emerging Applications in Biomedical DomainShikha, * January 2016 (has links) (PDF)
Efficient and accurate sensing of various parameters is needed for numerous applications. In this regard, different categories of sensors play a significant role and different applications require diverse sensing mechanisms owing to the operating conditions and field constraints. Among the several sensor methodologies available, optical fiber sensors have found significant attention, because of their advantages such as negligible foot print, small mass, immunity to Electromagnetic Interference, etc.
In the category of optical fiber sensors, Fiber Bragg Grating (FBG) sensors have found importance in many fields such as health monitoring of civil structures, environmental monitoring involving gas & humidity sensing, monitoring parameters like pressure, tilt, displacement, etc. In the recent times, FBGs have found applications in biomedical, biomechanical and biosensing fields.
A FBG is a periodic change of the refractive index of the core of a single mode optical fiber along its longitudinal axis. The periodic modulation in the index of refraction is obtained by exposing a photosensitive germanium-doped silica fiber to an intense UV laser beam. FBGs, in the basic form, can sense strain and temperature. However, in recent years, several newer sensing applications of FBGs have been demonstrated. Some of the main features of the FBG sensor which qualify them for diverse sensing applications are high sensitivity, large operational bandwidth, multiplexing & multi modal sensing capability, etc.
In this thesis work, FBG sensor based devices have been developed for newer applications in bio-medical fields for the measurement of force, flow and temperature.
Particularly, novel transduction methodologies have been proposed, in order to convert the measurand parameter into a secondary parameter that can be sensed by the FBG sensor.
The evaluation of the force required for a spinal needle to penetrate various tissue layers from skin to the epidural space is vital. In this work, a novel technique for dynamic monitoring of force experienced by a spinal needle during lumbar puncture using Fiber Bragg Grating (FBG) sensor has been developed. The Fiber Bragg Grating Force Device (FBGFD) developed, measures the force on the spinal needle due to varied resistance offered by different tissue layers during its traversal.
The effect of gauge of the spinal needle used for the lumbar puncture procedure affects the force required for its insertion into the tissue. The FBGFD developed, has been further utilized for a comparative study of the force required for lumbar puncture of various tissue layers with spinal needle of different gauges. The results obtained may serve as a guideline for selection of suitable gauge spinal needle during lumbar puncture minimizing post puncture side effects on patients.
The pulmonary function test carried out using a spirometer, provides vital information about the functional status of the respiratory system of the subject. A Fiber Bragg Grating Spirometer (FBGS) has been developed which has the ability to convert the rate of air flow into a shift in wavelength that can be acquired by the FBG sensor. The FBGS can dynamically acquire the complete breathing sequence comprising of the inhalation phase, pause phase and exhalation phase in terms of the air flow rate along with the time duration of each phase. Methods are adopted to analyse and determine important pulmonary parameters using FBGS and compare these parameters with those obtained with a commercially available hospital grade pneumotachograph spirometer.
Thermal imaging is one of the emerging non-invasive neuro-imaging techniques which can potentially indicate the boundaries of a brain tumor. The variation in tissue surface temperature is indicative of a tumor existence. In this work a FBG temperature sensor (FBGTS) has been developed for thermography of a simulated tissue using Agar material. The temperature of the embedded heater which mimics a brain tumor along with the surface temperature of the tissue model, is acquired using FBGTSs simultaneously. Further, the surface temperatures are studied for varying heater temperatures as well as varying positions of the heater in the simulated tissue model.
To conclude, FBG based devices have been developed in this work, for applications in biomedical domain, with appropriate transduction methodologies for sensing different parameters such as force, flow and temperature.
|
Page generated in 0.0624 seconds