Power system protection is important for service reliability and quality assurance. Various faults may occur due to natural and artificial calamity. Dispatchers are use the changed statuses of protection devices from the Supervisory Control and Data Acquisition (SCADA) system to identify the fault. To reduce the outage duration and promptly restore power services, fault section detection has to be done effectively and accurately with fault alarms. In this thesis, artificial neural networks (ANN) and Grey Relational Analysis (GRA) are used to develop the restoration schemes for emergency operation in a power system including fault section detection (FSD), restoration strategy(RS), and voltage correction(VC). The optimal power flow (OPF) is responsible for verifying the proposed schemes by off-line analysis. With a IEEE 30-Bus power system, computer simulations were conducted to show the effectiveness of the proposed restoration schemes.

Power system protection is important for service reliability and quality assurance. Various faults may occur due to natural and artificial calamity. To reduce the outage duration and promptly restore power services, fault section estimate has to be done effectively with appeared fault alarms. Dispatchers could study the changed statuses of primary/back-up relays and circuit breakers to identify the fault section and fault types. It is difficult to process too many alarms under various conditions in a large power system. Single fault, multiple faults, single and multiple faults could coexist with the failed operation of relays and circuit breakers, or with the erroneous data communication. Dispatchers need more time to process the many uncertainties before identifying the fault. This thesis presents the use of artificial intelligence for fault section detection in substation with neural networks. Probabilistic Neural Networks (PNN) are proposed for fault detection system in substation. The proposed methodology will use primary/back-up information of protective relays and circuit breakers to detect the fault sections involving single fault, multiple faults, or fault with the failure operation of the relays and circuit breakers. This paper also presents a fuzzy theory-based method to identify fault types. It is derived to improve the inadequacy of making decisions by selecting a fixed threshold value and has the capability of non-deterministic decision making with a prior knowledge of uncertainties in fault location, fault resistance and the a size of loads. The proposed approach has been tested on a typical taipower system with accurate results.

Power system protection is important for service reliability and quality assurance. Various faults may occur due to natural and artificial calamity. To reduce the outage duration and promptly restore power services, fault section estimate has to be done effectively and accurately with fault alarms. Dispatchers study the changed statuses of protection devices from the Supervisory Control and Data Acquisition (SCADA) system to identify the fault. Single and multiple faults could coexist with the failed operation of relays and circuit breakers, or with the erroneous data communication. It needs a long time to process a large number of alarms under various conditions involving multiple faults and many uncertainties. To cope with the problem, an effective tool is helpful for the fault section estimation and alarm processing. Besides, power transformer plays a major role in a power system. For a better service quality, it is important to be routinely examined for detecting incipient faults inside transformers. Preventive techniques for early detection can find out the incipient faults and avoid outages. Power quality is another issue to considerable attentions from utilities and customers due to the popular uses of many sensitive electronic equipment. Harmonics, voltage swell, voltage sag, and, power interruption could downgrade the service quality. To ensure the power quality, detecting harmonic and voltage disturbances becomes important. A detection method with classification capability will be helpful for detecting disturbances. This dissertation developed various algorithm for detection including fault section detection, alarm processing, transformer fault diagnosis, and power quality detection. For a well-dispatched power system, the adaptive detection idea will be used, and the existing SCADA/EMS will be integrated without extra devices.