Titanium dioxide (TiO2) is an important semiconducting metal oxide and is expected to play an important role in future applications related to photonic crystals, energy storage, and photocatalysis. Two aspects regarding the combustion synthesis have been investigated; scale-up in laboratory synthesis and advanced nanoparticle synthesis. Concerning the scale-up issue, a novel curved wall-jet (CWJ) burner was designed for flame synthesis. This was achieved by injecting precursors of TiO2 through a central port into different flames zones that were stabilized by supplying fuel/air mixtures as an annular-inward jet over the curved wall. This provides a rapid mixing of precursors in the reaction zone with hot products. In order to increase the contact surface between the precursor and reactants as well as its residence time within the hot products, we proposed two different modifications. The CWJ burner was modified by adding a poppet valve on top of the central port to deliver the precursor tangentially into the recirculating flow upstream within the recirculation zone. Another modification was made by adopting double-slit curved wall-jet (DS-CWJ) configuration, one for the reacting mixture and the other for the precursor instead of the central port. Particle growth of titanium dioxide (TiO2) nanoparticles and their phases were investigated. Ethylene (C2H4), propane (C3H8), and methane (CH4) were used with varying equivalence ratio and Reynolds number and titanium tetraisopropoxide (TTIP) was the precursor. Flow field and flame structure were quantified using particle image velocimetry (PIV) and OH planar laser-induced fluorescence (PLIF) techniques, respectively. TiO2 nanoparticles were characterized using high-resolution transmission electron microscopy (HRTEM), X-ray diffraction (XRD), Raman Spectroscopy, and BET nitrogen adsorption for surface area analysis. The flow field quantified by PIV consisted of a wall-jet region leading to a recirculation zone, an interaction jet region, followed by a merged-jet region. The modified CWJ burner revealed appreciable mixing characteristics between the precursor and combustion gases within these regions, with a slight increase in the axial velocity due to the precursor injection. This led to more uniformity in particle size distribution of the synthesized nanoparticles with the poppet valve (first modification). The double-slit modification improved the uniformity of generated nanoparticles at a very wide range of stable experimental conditions. Images of OH fluorescence showed that flames are tightly attached to the burner tip and TTIP has no influence on these flames structures. The particle size was slightly affected by the operating conditions. The phase of TiO2 nanoparticles was mainly dependent on the equivalence ratio and fuel type, which impact flame height, heat release rate and high temperature residence time of the precursor vapor. For ethylene and methane flames, the anatase content is proportional to the equivalence ratio, whereas it is inversely proportional in the case of propane flames. The anatase content reduced by 8% as we changed Re between 8,000 and 19,000, implying that the Re has a slight effect on the anatase content. The synthesized TiO2 nanoparticles exhibited high crystallinity and the anatase phase was dominant at high equivalence ratios (φ >1.6) for C2H4, and at low equivalence ratios (φ <1.3) for the C3H8 flame. Concerning advanced nanoparticle synthesis, a multiple diffusion burner and flame spray pyrolysis (FSP) were adopted in this study to investigate the effect of doping/coating on TiO2 nanoparticles. The nanoparticles were characterized by the previously mentioned techniques in addition to thermogravimetric analysis (TGA) for carbon content, X-ray photoelectron spectroscopy (XPS) for surface chemistry, ultraviolet-visible spectroscopy (UV-vis) for light absorbance, inductively coupled plasma (ICP) for metal traces, and superconducting quantum interference device (SQUID) for magnetic properties. Results from multi diffusion burner show that doping TiO2 with vanadium changes the phase from anatase to rutile while doping and coating with carbon or SiO2 does not affect the phase. Doping with iron reduces the band gab of TiO2 particles by reducing the conduction band. FSP results show that iron doping changes the valance band of the nanoparticles and enhances their paramagnetic behavior as well as better light absorption than pure titania, which make these particles good candidates for photocatalytic applications.

Over the past few decades, inorganic nanostructured materials have elicited a lot of interest due to their high surface-to-volume ratio and many size dependent properties which stem from their nanoscale dimensions. Owing to these distinct properties, they have found applications in widespread fields like catalysis, energy storage, electronics, and biotechnology. In the field of biotechnology, nanotubes and mesoporous materials are attractive vehicles for drug delivery because of their hollow and porous structures and facile surface functionalization. Their inner void can take up large amounts of drug as well as act as gates for the controlled release of drug. These hollow structures can also be used for confining biomolecules like proteins and peptides. The study on protein conformation in biocompatible materials is very important in materials sciences for the development of new and efficient biomaterials(sensors, drug delivery systems or planted devices). Titania(TiO2)has been widely explored for applications in photovoltaic cells, batteries, desalination, sensing, and photocatalysis, to name only a few. The work presented in this thesis focuses on titania based nanostructures for drug delivery and protein confinement. First part of the work focusses on synthesis and characterization of Fe-doped TiO2 nanotubes. Fe-doped TiO2 nanotubes were demonstrated as controlled drug delivery agents. In vitro cytotoxic effects of Fe-doped titania nanotubes were assessed by MTT assay by exposing Hela cell line to the nanotubes. Second part of the work focusses on synthesis and characterization of TiO2 nanotubes by two synthesis procedures, namely hydrothermal and sol-gel template synthesis. Myoglobin, a model globin protein was encapsulated in hydrothermally synthesized TiO 2 nanotubes(diameter 5 nm) and sol-gel template synthesized TiO2 nanotubes(diameter 200 nm). Effect of encapsulating myoglobin these nanotubes was studied. The electrochemical activity and structure of myoglobin were studied by cyclic voltammetry and circular dichroism respectively. Direct electron transfer was found to be enhanced upon confinement in 200 nm diameter nanotubes. No such enhancement was observed upon encapsulation in hydrothermally synthesized nanotubes. In addition to this, the thermal stability of myoglobin was found to be enhanced upon confinement inside 200 nm diameter TiO 2 nanotubes.