No description available.

The magnetic separation approach has several advantages compared with conventional separation methods / it can be performed directly in crude samples containing suspended solid materials without pretreatment, and can easily isolate some biomolecules from aqueous systems in the presence of magnetic gradient fields. This thesis focused on the development of new class of magnetic separation material particularly useful for the separation of histidine-tagged proteins from the complex matrixes through the use of imidazole side chains of histidine molecules. For that reason surface modified cobalt ferrite nanoparticles which contain Ni-NTA affinity group were synthesized. Firstly, cobalt ferrite nanoparticles with a narrow size distribution were prepared in aqueous solution using the controlled coprecipitation method. In order to obtain small size of agglomerates two different dispersants, oleic acid and sodium chloride, were tried. After obtaining the best dispersant and optimum experimental conditions, ultrasonic bath was used in order to decrease the size of agglomerates. Then, they were coated with silica and this was followed by surface modification of these nanoparticles by amine in order to add functional groups on silica shell. Next, &ndash / COOH functional groups were added to silica coated cobalt ferrite magnetic nanoparticles through the NH2 groups. After that N&alpha / ,N&alpha / -Bis(carboxymethyl)-L-lysine hydrate, NTA, was attached to carboxyl side of the structure. Finally, nanoparticles were labeled with Ni (II) ions. The size of the magnetic nanoparticles and their agglomerates were determined by FE-SEM images, particle size analyzer, and zeta potential analyzer (zeta-sizer). Vibrational sample magnetometer (VSM) was used to measure the magnetic behavior of cobalt ferrite and silica coated cobalt ferrite magnetic nanoparticles. Surface modifications of magnetic nanoparticles were followed by FT-IR measurements. ICP-OES was used to find the amount of Ni (II) ion concentration that was attached to the magnetic nanoparticle.

Neste estudo apresenta-se a síntese de duas amostras de nanopartículas de ferrita de níquel, denominadas C-NiFe2O4 e NiFe2O4, através de um método simples, de baixo custo e ambientalmente amigável. Estudos morfológicos, estruturais, eletrônicos, ópticos e magnéticos foram realizados com o intuito de caracterizar as propriedades desses materiais para que possibilitassem, além de maior grau de conhecimento, sua aplicação como sensores colorimétricos para detecção de ácido ascórbico e peróxido de hidrogênio. Mediante a análise térmica dos precursores, foi possível determinar os intervalos de temperatura de decomposição, assim como a temperatura ótima de formação das nanopartículas. A amostra NiFe2O4 é ferromagnética e corresponde a uma fase cúbica de espinélio inverso. Os dados de difração de raios X, espectroscopia Mössbauer e o modelo iônico sugerem a presença de um certo grau de substituição, possuindo em sua estrutura um cátion divalente como agente dopante. As nanopartículas de C-NiFe2O4 foram utilizadas como catalisador na oxidação do 3,3',5,5'-tetrametilbenzidina (TMB) em meio ácido para formar uma solução azul sem adição de outro reagente. Como resultado foi utilizado como sensor colorimétrico para detecção de ácido ascórbico, visto que este reduz o complexo de transferência de carga, TMBOX, novamente para TMB. A calibração analítica apresentou uma faixa linear entre 1-20 μM para a concentração de ácido ascórbico, com limite de detecção (3/m) de 0,93 μM. A determinação em suplementos de vitamina C através do método de adição de padrão mostrou a eficiência do sensor para detectar ácido ascórbico em amostras reais. Já a amostra de NiFe2O4 demonstrou atividade catalítica semelhante as peroxidases naturais, oxidando o TMB na presença de H2O2 para formar TMBOX, que dá coloração azul a solução. Dessa forma, NiFe2O4 foi utilizado em um sensor colorimétrico para detecção de H2O2 e a calibração analítica revelou duas faixas lineares, uma entre 2,28 - 28,60 μM e a outra entre 28,60 μM - 114,20 μM. O limite de detecção (3/m) foi de 1,94 μM. Ambos os métodos apresentaram boa repetibilidade, com coeficiente de variação de 3,5% e 4% respectivamente. / This study presents the synthesis of two samples of nickel ferrite nanoparticles, termed C-NiFe2O4 and NiFe2O4, through a simple, low cost and environmentally friendly method. Morphological, structural, electronic, optical and magnetic studies were carried out with the aim of characterizing the properties of these materials, which allowed the application of colorimetric sensors for the detection of ascorbic acid and hydrogen peroxide. Through the thermal analysis of the precursors, it was possible to determine the decomposition temperature ranges, as well as the optimum temperature of formation of the nanoparticles. The sample NiFe2O4 is ferromagnetic and corresponds to a cubic phase of inverse spinel. The X-ray diffraction data, Mössbauer spectroscopy and the ionic model suggest the presence of a certain degree of substitution, having in its structure a divalent cation as a doping agent. The C-NiFe2O4 nanoparticles were used as catalysts in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in acidic medium to form a blue solution without addition of another reagent. As a result, it was used as a colorimetric sensor for the detection of ascorbic acid, as it reduces the charge transfer complex, TMBOX, again to TMB. The analytical calibration showed a linear range between 1-20 μM for the concentration of ascorbic acid, with a detection limit (3 /m) of 0.93 μM. The determination of vitamin C supplements using the standard addition method showed the efficiency of the sensor to detect ascorbic acid in actual samples. Already NiFe2O4 sample demonstrated catalytic activity similar to natural peroxidases, oxidizing the TMB in the presence of H2O2 to form TMBOX, which gives blue coloration to the solution. Thus, NiFe2O4 was used in a colorimetric sensor to detect H2O2, and the analytical calibration revealed two linear ranges, one between 2.28 - 28.60 μM and the other between 28.60 μM - 114.20 μM. The detection limit (3 /m) was 1.94 μM. Both methods presented good repeatability, with a coefficient of variation of 3.5% and 4% respectively.

Neste estudo apresenta-se a síntese de duas amostras de nanopartículas de ferrita de níquel, denominadas C-NiFe2O4 e NiFe2O4, através de um método simples, de baixo custo e ambientalmente amigável. Estudos morfológicos, estruturais, eletrônicos, ópticos e magnéticos foram realizados com o intuito de caracterizar as propriedades desses materiais para que possibilitassem, além de maior grau de conhecimento, sua aplicação como sensores colorimétricos para detecção de ácido ascórbico e peróxido de hidrogênio. Mediante a análise térmica dos precursores, foi possível determinar os intervalos de temperatura de decomposição, assim como a temperatura ótima de formação das nanopartículas. A amostra NiFe2O4 é ferromagnética e corresponde a uma fase cúbica de espinélio inverso. Os dados de difração de raios X, espectroscopia Mössbauer e o modelo iônico sugerem a presença de um certo grau de substituição, possuindo em sua estrutura um cátion divalente como agente dopante. As nanopartículas de C-NiFe2O4 foram utilizadas como catalisador na oxidação do 3,3',5,5'-tetrametilbenzidina (TMB) em meio ácido para formar uma solução azul sem adição de outro reagente. Como resultado foi utilizado como sensor colorimétrico para detecção de ácido ascórbico, visto que este reduz o complexo de transferência de carga, TMBOX, novamente para TMB. A calibração analítica apresentou uma faixa linear entre 1-20 μM para a concentração de ácido ascórbico, com limite de detecção (3/m) de 0,93 μM. A determinação em suplementos de vitamina C através do método de adição de padrão mostrou a eficiência do sensor para detectar ácido ascórbico em amostras reais. Já a amostra de NiFe2O4 demonstrou atividade catalítica semelhante as peroxidases naturais, oxidando o TMB na presença de H2O2 para formar TMBOX, que dá coloração azul a solução. Dessa forma, NiFe2O4 foi utilizado em um sensor colorimétrico para detecção de H2O2 e a calibração analítica revelou duas faixas lineares, uma entre 2,28 - 28,60 μM e a outra entre 28,60 μM - 114,20 μM. O limite de detecção (3/m) foi de 1,94 μM. Ambos os métodos apresentaram boa repetibilidade, com coeficiente de variação de 3,5% e 4% respectivamente. / This study presents the synthesis of two samples of nickel ferrite nanoparticles, termed C-NiFe2O4 and NiFe2O4, through a simple, low cost and environmentally friendly method. Morphological, structural, electronic, optical and magnetic studies were carried out with the aim of characterizing the properties of these materials, which allowed the application of colorimetric sensors for the detection of ascorbic acid and hydrogen peroxide. Through the thermal analysis of the precursors, it was possible to determine the decomposition temperature ranges, as well as the optimum temperature of formation of the nanoparticles. The sample NiFe2O4 is ferromagnetic and corresponds to a cubic phase of inverse spinel. The X-ray diffraction data, Mössbauer spectroscopy and the ionic model suggest the presence of a certain degree of substitution, having in its structure a divalent cation as a doping agent. The C-NiFe2O4 nanoparticles were used as catalysts in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in acidic medium to form a blue solution without addition of another reagent. As a result, it was used as a colorimetric sensor for the detection of ascorbic acid, as it reduces the charge transfer complex, TMBOX, again to TMB. The analytical calibration showed a linear range between 1-20 μM for the concentration of ascorbic acid, with a detection limit (3 /m) of 0.93 μM. The determination of vitamin C supplements using the standard addition method showed the efficiency of the sensor to detect ascorbic acid in actual samples. Already NiFe2O4 sample demonstrated catalytic activity similar to natural peroxidases, oxidizing the TMB in the presence of H2O2 to form TMBOX, which gives blue coloration to the solution. Thus, NiFe2O4 was used in a colorimetric sensor to detect H2O2, and the analytical calibration revealed two linear ranges, one between 2.28 - 28.60 μM and the other between 28.60 μM - 114.20 μM. The detection limit (3 /m) was 1.94 μM. Both methods presented good repeatability, with a coefficient of variation of 3.5% and 4% respectively.

Neste estudo apresenta-se a síntese de duas amostras de nanopartículas de ferrita de níquel, denominadas C-NiFe2O4 e NiFe2O4, através de um método simples, de baixo custo e ambientalmente amigável. Estudos morfológicos, estruturais, eletrônicos, ópticos e magnéticos foram realizados com o intuito de caracterizar as propriedades desses materiais para que possibilitassem, além de maior grau de conhecimento, sua aplicação como sensores colorimétricos para detecção de ácido ascórbico e peróxido de hidrogênio. Mediante a análise térmica dos precursores, foi possível determinar os intervalos de temperatura de decomposição, assim como a temperatura ótima de formação das nanopartículas. A amostra NiFe2O4 é ferromagnética e corresponde a uma fase cúbica de espinélio inverso. Os dados de difração de raios X, espectroscopia Mössbauer e o modelo iônico sugerem a presença de um certo grau de substituição, possuindo em sua estrutura um cátion divalente como agente dopante. As nanopartículas de C-NiFe2O4 foram utilizadas como catalisador na oxidação do 3,3',5,5'-tetrametilbenzidina (TMB) em meio ácido para formar uma solução azul sem adição de outro reagente. Como resultado foi utilizado como sensor colorimétrico para detecção de ácido ascórbico, visto que este reduz o complexo de transferência de carga, TMBOX, novamente para TMB. A calibração analítica apresentou uma faixa linear entre 1-20 μM para a concentração de ácido ascórbico, com limite de detecção (3/m) de 0,93 μM. A determinação em suplementos de vitamina C através do método de adição de padrão mostrou a eficiência do sensor para detectar ácido ascórbico em amostras reais. Já a amostra de NiFe2O4 demonstrou atividade catalítica semelhante as peroxidases naturais, oxidando o TMB na presença de H2O2 para formar TMBOX, que dá coloração azul a solução. Dessa forma, NiFe2O4 foi utilizado em um sensor colorimétrico para detecção de H2O2 e a calibração analítica revelou duas faixas lineares, uma entre 2,28 - 28,60 μM e a outra entre 28,60 μM - 114,20 μM. O limite de detecção (3/m) foi de 1,94 μM. Ambos os métodos apresentaram boa repetibilidade, com coeficiente de variação de 3,5% e 4% respectivamente. / This study presents the synthesis of two samples of nickel ferrite nanoparticles, termed C-NiFe2O4 and NiFe2O4, through a simple, low cost and environmentally friendly method. Morphological, structural, electronic, optical and magnetic studies were carried out with the aim of characterizing the properties of these materials, which allowed the application of colorimetric sensors for the detection of ascorbic acid and hydrogen peroxide. Through the thermal analysis of the precursors, it was possible to determine the decomposition temperature ranges, as well as the optimum temperature of formation of the nanoparticles. The sample NiFe2O4 is ferromagnetic and corresponds to a cubic phase of inverse spinel. The X-ray diffraction data, Mössbauer spectroscopy and the ionic model suggest the presence of a certain degree of substitution, having in its structure a divalent cation as a doping agent. The C-NiFe2O4 nanoparticles were used as catalysts in the oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) in acidic medium to form a blue solution without addition of another reagent. As a result, it was used as a colorimetric sensor for the detection of ascorbic acid, as it reduces the charge transfer complex, TMBOX, again to TMB. The analytical calibration showed a linear range between 1-20 μM for the concentration of ascorbic acid, with a detection limit (3 /m) of 0.93 μM. The determination of vitamin C supplements using the standard addition method showed the efficiency of the sensor to detect ascorbic acid in actual samples. Already NiFe2O4 sample demonstrated catalytic activity similar to natural peroxidases, oxidizing the TMB in the presence of H2O2 to form TMBOX, which gives blue coloration to the solution. Thus, NiFe2O4 was used in a colorimetric sensor to detect H2O2, and the analytical calibration revealed two linear ranges, one between 2.28 - 28.60 μM and the other between 28.60 μM - 114.20 μM. The detection limit (3 /m) was 1.94 μM. Both methods presented good repeatability, with a coefficient of variation of 3.5% and 4% respectively.

This thesis provides several nanomaterial systems that can be used as contrast agents in magnetic resonance imaging (MRI) and for optical fluorescence imaging. Nanoparticle systems described in this thesis fall under three categories: (a) graphene oxide-nanoparticle composites for MRI contrast agent application, (b) core-shell nanoparticles for MRI contrast agent application and (c) nanoparticle systems for both MRI and optical fluorescence imaging. In the case of graphene oxide based nano-composites, the following observations were made: (i) in the case of graphene oxide-Fe3O4 nanoparticle composite, it was observed that high extent of oxidation of the graphene oxide and large spacing between the graphene oxide sheets containing Fe3O4 nanoparticles provides the optimum structure for yielding a very high transverse proton relaxivity value, (ii) in the case of graphene oxide-Gd2O3 nanoparticle composite, it was observed that this composite exhibits high value for both longitudinal and transverse relaxivity values making it a potential materials for multi-contrast study of pathologies with a single agent, (iii) in the case of graphene oxide-CoFe2O4 nanoparticle composites, it was observed that an increase in the reflux time of the reaction mixture containing this composite led to appreciable variations in the proton relaxivity values. Transverse relaxivity value of the water protons increased monotonically with increase in the reflux time. Whereas, the longitudinal relaxivity value initially increased and then decreased with increase in the reflux time. In the case of coreshell nanoparticles for MRI contrast agent application two different core-shell systems were investigated. They are MnFe2O3-Fe3O4 core-shell nanoparticles and CoFe2O4-MnFe2O4 coreshell nanoparticles. Investigations of both the core-shell nanoparticle systems revealed that the proton relaxivity value obtained in the dispersion of the core-shell nanoparticles was considerably greater than the proton relaxivity value obtained in the presence of single phase nanoparticles of the core and shell phases. Very high value of transverse relaxivity in the case core-shell nanoparticles was due to the large magnetic inhomogeneity created by the core-shell nanoparticles in the water medium surrounding it. In the case of nanoparticle systems for both MRI and optical fluorescence imaging, two different systems were investigated. They were CoFe2O4-ZnO core-shell nanoparticles and Gd doped ZnS nanoparticles [Zn1-xGdxS, x= 0.1, 0.2 and 0.3] formed on graphene oxide sheets or coated with chitosan. In the case of CoFe2O4-ZnO core-shell nanoparticles it was observed that fluorescent CoFe2O4-ZnO core-shell nanoparticles with the unique geometry in which CoFe2O4 ferrite nanoparticles agglomerates were present within larger sized hollow ZnO capsules yields very high value of transverse proton relaxivity when compared to the proton relaxivity value exhibited by the individual CoFe2O4-ZnO coreshell nanoparticles. In the case of Gd doped ZnS nanoparticles, two different systems were synthesized and the values of the longitudinal and transverse proton relaxivity obtained were compared. These systems were (i) graphene oxide- Zn1-xGdxS (x= 0.1, 0.2 and 0.3) nanoparticle composites and (ii) chitosan coated Zn1-xGdxS (x= 0.1, 0.2 and 0.3) nanoparticles. It was observed that Gd doped ZnS nanoparticles in both cases exhibit both longitudinal and transverse relaxivity values. The relaxivity values showed a clear dependence on the composition of the nanoparticles and the nanoparticle environment (presence and absence of graphene oxide). It was also observed that Gd doped ZnS nanoparticle can be used for florescence imaging.