No description available.

In recent years, nanoprobe-based devices have attracted significant attention and found a wide range of applications, including nanostructure imaging, single molecular detection, and physical, chemical, and biological sensing applications. However, since the scale of nanodevices is substantially less than the optical diffraction limit, their fabrication remains a difficult challenge. Despite significant efforts, most of the fabrication techniques developed so far require expensive equipment and complicated processing procedures, which has hindered their applications. In this thesis, we developed a new class of fluorescent nanoprobes consist of a silica fiber taper, a single carbon nanotube, and nanoscale fluorescent elements (such as semiconductor quantum dots). This nanoprobe provides a natural interface between the nanoscale structures (i.e., the fluorescent elements) and the microscale structure (i.e., the fiber taper), which can significantly simplify their fabrication. Furthermore, since the nanoscale fluorescent elements are produced through bottom-up processes such as chemical synthesis, we can easily tailor the functionalities of such fluorescent nanoprobes to many different applications in nanophotonics, including near field imaging, nonlinear optics mapping, and quantum electrodynamics. We have custom designed an optical system for this nanoprobe fabrication. We have characterized the nanoprobes using transmission electron microscope (TEM) and scanning electron microscope (SEM) and performed preliminary experiments on near field scanning. Our current fabrication/imaging systems can be readily upgraded to achieve more advanced applications in nonlinear optics and quantum optics. / Master of Science

Thesis (Ph.D.) OGI School of Science & Engineering at OHSU, July 2007. / Includes bibliographical references (leaves 202-216).

Fiber optical temperature and strain sensors have been extensively investigated for applications in the civil structures to ensure safety and prevent disasters in advance. Most of the demonstrated fiber sensors are based on the silica fibers to form an interferometer by measuring the spectrum wavelength shift caused by the change of the refractive index and fiber length, and the sensitivities, defined as the rate of wavelength shift with respect to temperature or strain, are limited by the small values of thermal-expansion coefficient and thermo-optic effect of the silica materials. To improve the sensitivity, we designed the dual-core As2Se3-PMMA fiber with the PMMA cladding diameter 56.5 times larger than that of the As2Se3 cores, which brings out many interesting sensing applications. Nonlinear devices have a variety of practical applications including parametric amplification, all-optical switching, super-continuum generation, and sensing applications. Tapered chalcogenide-polymer fiber structures composed of an As2Se3 core and a polymethyl methacrylate (PMMA) cladding are a promising platform for nonlinear applications because the As2Se3 core provides high nonlinearity over the near- and mid-infrared spectral ranges for compact nonlinear devices with low power consumption and the PMMA cladding provides high mechanical strength for easy handling. Advanced As2Se3-PMMA fiber structures such as dual-core fibers that support guided propagation of an even mode and an odd mode will open the way for a variety of novel devices in the near- and mid-IR wavelength range. In my work I utilized two As2Se3 fibers and a polymethyl methacrylate (PMMA) tube for the fabrication of dual-core As2Se3-PMMA tapers and demonstration of the sensing applications and nonlinear optical effects. The thesis mainly consists of three parts: the fabrication process, the sensing applications, and the nonlinear applications in the tapered dual-core As2Se3-PMMA fiber. In the first part, the fabrication process of the tapered dual-core As2Se3-PMMA fiber is introduced. The dual-core As2Se3-PMMA fibers are fabricated using a rod-in-tube method. The images of the setups and fibers in process are listed. In the second part, a theoretical model for temperature and strain measurement and four sensing applications are introduced. Firstly, we demonstrate an approach for high-sensitivity simultaneous temperature and strain measurement in a dual-core As2Se3-PMMA taper with As2Se3 core diameter of 0.55 μm. High measurement sensitivities are observed for both principal polarization axes of the tapered dual-core As2Se3-PMMA fiber with temperature sensitivities of -115 pm/ºC for axis-1, -35.5 pm/ºC for axis-2, and strain sensitivities of -4.21 pm/με for axis-1 and -3.16 pm/με for axis-2. Secondly, the thermal forces in a dual-core As2Se3-PMMA taper are investigated. A temperature-insensitive strain sensor is proposed and demonstrated based on the thermal forces. Finally, two approaches for temperature and strain sensitivity enhancement are investigated. The first approach is by reducing the value of the variation of the difference between phases of the even and odd modes with respect to wavelength (∂ϕd(λ)/∂λ) and increasing thermal-forces in a dual-core As2Se3-PMMA taper with As2Se3 core diameter of 2.5 μm. The value of ∂ϕd(λ)/∂λ decreases with the As2Se3 core diameter and thermal-forces on the As2Se3 cores are enhanced in the fibers with large PMMA cladding, which work together to enhance the measurement sensitivity. The second approach is based on effective group-velocity matching between the even and odd modes of a dual-core As2Se3-PMMA taper on which an antisymmetric long-period grating is inscribed. The variation of the difference between phases of the even and odd modes with respect to wavelength tends to 0 (∂ϕd(λ)/∂λ→0) near the resonance wavelength of the grating due to the effective group-velocity matching between the two modes, and consequently, thermally-induced change of the difference between phases of the two modes ϕd (λ) leads to a large wavelength shift indicating enhancement of the temperature measurement sensitivity. In the third part, I study the nonlinear optical effects in the hybrid fibers. Firstly, I demonstrate modulation instability within the normal-dispersion regime in a dual-core As2Se3-PMMA fiber. Then I review the work about the forward stimulated Brillouin scattering and its sensing applications. The radial and torsional-radial guided acoustic modes of silica fibers and tapered dual-core As2Se3-PMMA fibers are investigated experimentally and the preliminary results are presented.

This dissertation investigates the optical design and characterization for two distinct remote sensing applications. The first application is focused on the high precision optical phase correction for the photonic Local Oscillator (LO) designed for the Atacama Large Millimeter Array (ALMA). The phase instability in the original fiber optics design scheme is characterized and a novel, singlemode fiber-based interferometric approach to measure and actively zero out the unwanted Photonic LO phase drift is introduced. The proposed technique is implemented and characterized by using a 16 km baseline with a two element array. In the second application, the first iteration of the quasioptics design used in the ATOMMS instrument is characterized. (ATOMMS-Active Temperature, Ozone and Moisture Microwave Spectrometer-is the pathfinding implementation of an Earth and Space Atmosphere Global Remote Sensing Instrument).The diffraction problems in this design which were limiting the instrument performance were analyzed. Then different design concepts to mitigate these limitations and optimize system performance are presented.

published_or_final_version / abstract / Electrical and Electronic Engineering / Master / Master of Philosophy

M.Ing. / A study was done on optical fibre hydrophones. Integrated optic hydrophone components as well as optical fibre components were investigated. An optical fibre coupler was successfully manufactured with an etch process. The coupling ratio can be varied mechanically or by means of refraction index variation. Experimental procedures and results will be shown. Bending losses excited in an optical fibre coil were investigated as a function of different coil diameters. The results were extrapolated to determine the amount of losses arising in a hydrophone coil.

A model is developed for the optimization. The model can be used for the merger of both identical and non-identical networks. The overall costs for various topologies are optimized with respect to different interconnection build costs. It is shown that the merger of two optical networks can reduce more than 50% of operational fiber links, while routing between any two nodes in the two optical networks are maintained. This has been proven through case analysis and analytical results. / An algorithm for resource optimization is also developed for the consolidation of two coexisting networks. In all cases after critical interconnection build cost, only two interconnection fiber links are needed. It is shown that the optimization is to find a Hamiltonian path that covers all the nodes in each network or to find a path that contains a maximum number of directly connected articulation nodes with different groupings. / Case analysis results for part of a real China network and other topologies are discussed. Analytical results can be derived for both the minimum number of links required for arbitrary connected networks and the locations of the two interconnections for the merger of two networks. In addition, more comprehensive analysis on the effects of node degree, protection, and traffic demand are discussed. It is conclusive that through the merger of two optical networks substantial saving to the network operator will occur. / In this thesis, the merger of two networks by adding interconnection fiber links is investigated. Interconnection fiber links are only allowed at the co-located nodes of the two networks. With the additional interconnection links, it is possible to reduce the number of fiber links that are operational while maintaining the full connectivity between any two nodes in the two networks. By suspending some of the fiber links, the operational expenses of those links can be saved. Optimal cost and the number of interconnection links with their optimal locations for the merger of the two optical networks are investigated. / Telecommunication networks have been designed to carry voice traffic for decades. With the growth of data traffic in recent years, network operators have constructed substantial amount of fiber optic networks. Multiple telecommunication networks create redundancy in fiber resources. Resources have not been used optimally and revenue has plunged to its lowest since inception. Many network operators are considering co-location and merging in order to reduce cost. Merging two networks can achieve operational savings in redundant fiber links and therefore cost saving to the network operator. / The proposed model finds the optimal interconnection locations for different topologies. We analyzed the optimal location for several cases when the number of interconnection fiber links is two and some analytical results are derived. This assists network planners to focus on the optimal locations for interconnection links to be installed. / Leung, Raymond Hai Ming. / Adviser: Lian Kuan Chen. / Source: Dissertation Abstracts International, Volume: 70-06, Section: B, page: 3690. / Thesis (Ph.D.)--Chinese University of Hong Kong, 2008. / Includes bibliographical references (leaves 112-115). / Electronic reproduction. Hong Kong : Chinese University of Hong Kong, [2012] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Electronic reproduction. [Ann Arbor, MI] : ProQuest Information and Learning, [200-] System requirements: Adobe Acrobat Reader. Available via World Wide Web. / Abstracts in English and Chinese. / School code: 1307.

The widespread adoption of wavelength division multiplexing to increase the bandwidth of optical fiber communication systems has provided a major impetus for research on low cost, single-mode, wavelength stable tunable diode lasers for use in optical telecommunications due to the large volume of lasers required. Other applications, such as demodulation of fiber Bragg grating sensor systems can also make use of inexpensive tunable laser diodes. In addition, the steady increase in the amount of computational power available has led to the widespread use of computers to model physical systems both to predict system performance and to gain insight into physical behavior. Following a brief review of the application and construction of optical fiber Bragg gratings and a discussion of diode lasers and common methods of tuning diode laser wavelengths, a coupled-cavity approach to modeling laser diode output spectra, the construction of a fiber Bragg grating wavelength tunable laser, and the coupled cavity model of the fiber Bragg grating wavelength tunable diode laser are detailed. The physical laser system consists of a commercial Fabry-Perot diode laser with a cavity length of 300 microns, antireflection coated with a single layer of SiO, and coupled into an optical fiber containing a fiber Bragg grating. Wavelength tuning is accomplished by applying axial strain to the fiber grating. The coupled cavity model directly includes the antireflection coating, includes the fiber Bragg grating as an index step, and is the first reported implementation of this method to model fiber Bragg grating coupled laser diodes. The measured output spectra of the physical laser diode system and the calculated output spectra are given and compared. Continuous tuning of the diode laser by applying axial strain to the fiber grating is not observed nor calculated to occur for a single-layer silicon monoxide antireflection coating. To achieve continuous wavelength tuning, better antireflection coatings will need to be developed. / Graduation date: 2004

We present, for the first time, methods to model and control the polarization of the output lightwave of a bidirectional fiber-optic system, in which the lightwave propagates through polarization control elements in both directions. Using the dynamic eigenstate (DES) principle, we built model to simulate the behavior of the polarization evolution. In a bidirectional system with one control element, we extracted system parameters from experimental data and achieved less than 3% angular deviation between modeled and experimental state of polarization (SOP). The theory was further validated by varying the input SOP to the bidirectional system. Our method can be extended to predict the SOP of a system with multiple actuators. Furthermore, combining our deterministic control method and a feedback loop, we are able to control the output SOP to be within a mean angular deviation of 5.5% from the target SOP, with as few as three iterations.