Spelling suggestions: "subject:"childdirected"" "subject:"enddirected""
1 |
Field-directed nanowire chaining enabling transparent electrodesXu, Manyan 08 January 2019 (has links)
Transparent electrodes (TEs) require materials that have both transparency and electrical conductivity, a combination not usually found in nature. They are in increasing demand for use in solar cells, touch screens, displays, transparent heating films and several other devices. Most TEs used today are made of indium tin oxide (ITO). However, it has several disadvantages, such as high fabrication cost, rigidity and brittleness. Many ITO alternatives are being pursued, among which metallic nanowire (NW) networks on transparent substrates such as glass or polymer, have received much attention. This thesis demonstrates ordered silver NW networks on polyimide, fabricated by the field-directed chaining technique. We achieved a sheet resistance of 27 Ω/sq and 95.4% transparency at 550nm, with a Figure of Merit (FOM) 0.023Ω-1, which is higher than the FOM of commercial ITO, 0.005Ω-1. We have demonstrated that ordered NW networks, directed by alternative current (AC) electric fields, are easy to fabricate over a large area and at low cost, on rigid and flexible substrates.
The AC electric field changes with different experiment setup. In this work, the effect of polymer thickness, electric field frequency, and gap size between electrodes are explored by COMSOL simulation and validated experimentally. By choosing the appropriate frequency and gap size, ordered NW networks are successfully created on a 23μm polyethylene terephthalate (PET) sheet. Fluid motion is one of the disruptors during NW chaining. We demonstrate control of this disruptor by the use of sandwiched channels for the NW suspension.
Post-fabrication treatments are important and necessary for improving the connectivity and conductivity of Ag NW networks. In this work, we explore Joule heating and show its potential to improve the conductivity over other post-treatment approaches. However, Joule heating can also cause failures of NW networks.
Ordered NW networks present better optical-electrical properties than random NW networks. Post-fabrication treatment can improve the properties, but there is a limit. In this work, a mathematical model is built for optical-electrical properties of perfectly ordered NW networks, which sets the upper bound of performance for transparent electrodes made of NW networks. A linear relationship is found between the transmittance and inverse sheet resistance. The model is then modified with factors to account for departure from the ideal. / Graduate / 2019-12-12
|
2 |
Multi-frequency Ultrasound Directed Self-assemblyPresley, Christopher Tre 29 September 2023 (has links)
Ultrasound directed self-assembly (DSA) relies on the acoustic radiation force associated with a standing ultrasound wave to organize particles dispersed in a fluid medium into specific patterns. State-of-the-art ultrasound DSA methods can only organize particles into (quasi-)periodic patterns, limited by the use of single-frequency ultrasound wave fields. Acoustic holography and acoustic waveguides provide alternatives to assembling complex patterns of particles, but generally provide low spatial accuracy and are not re-configurable because they require custom hardware for each specific pattern of particles, which is impractical. We introduce multi-frequency ultrasound wave fields to organize particles in non-periodic patterns. We theoretically derive and experimentally validate a solution methodology to determine the operating parameters (frequency, amplitude, phase) of any number and spatial arrangement of ultrasound transducers, required to assemble spherical particles dispersed in an inviscid fluid medium into any specific two-dimensional pattern. The results show that multi-frequency ultrasound DSA enables the assembly of complex, non-periodic patterns of particles with substantially fewer ultrasound transducers than single-frequency ultrasound DSA, and without incurring a penalty in terms of accuracy. The results of this work fundamentally transform the state-of-the-art knowledge of ultrasound DSA. Multi-frequency ultrasound wave fields enable a near-unlimited complexity of patterns of particles that can be assembled, increasing the relevance of the technology to practical implementation in engineering applications such as manufacturing of engineered composite materials that derive their properties from the spatial organization of the filler in the matrix material. Although this work focuses specifically on ultrasound wave fields, the theoretical model is valid for all wave phenomena. / Master of Science / Ultrasound directed self-assembly (DSA) is the process where particles dispersed in a fluid medium assemble into specific patterns due to their interactions with a sound wave and/or other particles. Current ultrasound DSA methods use a single-frequency ultrasound wave to assemble particles into specific patterns, which creates repeating patterns within the fluid medium. Other methods of assembling particles that allow for more complex, non-repeating patterns generally provide low spatial accuracy and do not allow dynamically changing the pattern as they require custom hardware for each specific pattern of particles, rendering these methods impractical. We use many ultrasound waves each with a different frequency to organize particles into complex, non-repeating patterns, which we call multi-frequency ultrasound DSA. We theoretically derive and experimentally validate a method that allows us to assemble any specific two-dimensional pattern of particles using multi-frequency ultrasound DSA. The results show that multi-frequency ultrasound DSA enables the assembly of complex, non-repeating patterns of particles with substantially resources than single-frequency ultrasound DSA, and without incurring a penalty in terms of accuracy. Multi-frequency ultrasound DSA enables a near-unlimited complexity of patterns of particles that can be assembled, increasing the relevance of the technology to practical implementation in engineering applications.
|
Page generated in 0.0363 seconds