Spelling suggestions: "subject:"fluidfilm bearing"" "subject:"aluminiumfilm bearing""
1 |
Fluid pressure distribution at the interface between compliant and hard surfacesShan, Lei 12 1900 (has links)
No description available.
|
2 |
A Study of Methods for Improving the Dynamic Stability of High-Speed TurbochargersAlsaeed, Ali A. 05 May 2010 (has links)
The turbocharger industry is booming recently, and there is an urgent need for new evaluations of the overall design. As the oil prices continue to rise, along with the new emissions regulations strictly enforced for the in-road as well as the off-road vehicles, the transition to turbocharged engines, and especially for diesel engines, has become irresistible. Higher power, smaller engines, reduced emissions, and overall better efficiency are the main concerns. By means of the recent development in the computational tools, a new era of the product development has emerged.
Most diesel engine turbochargers incorporate floating-ring bearings that use the engine's oil for lubrication. The high-speed turbocharger is known to have subsynchronous vibrations at high amplitudes for a wide speed range that could reach 150,000 rpm. The bearing fluid-film whirl instability is the main source of the subsynchronous vibration. The nonlinear reaction forces inside the bearings are usually causing the rotor to whirl in a limit cycle but may become large enough to cause permanent damages. Additionally, the lubrication oil may leak at higher rates through the seals into the engine or the exhaust emissions.
This dissertation investigates methods for improving the dynamic stability of the high-speed automotive turbochargers, especially designed for heavy-duty diesel engines that are used for example in heavy machinery, trucks, tractors, etc. The study utilizes the available modern computational tools in rotor-dynamics in addition to the locally developed supportive computer codes. This research is a major part of the turbocharger dynamic analysis supporting the current extensive experimental tests in the Virginia Tech Rotor Dynamics Laboratory for the product development of different high-speed diesel engine turbochargers.
The study begins with the method of enhanced-performance hydrodynamic bearings. The aim is to modify the inner surface of the bearing for better dynamic characteristics. The finite-element model of the turbocharger rotor shaft with linearized bearing dynamic coefficients is developed. The system is solved for eigenvalues and eigenvectors in order to evaluate the dynamic stability. The first phase of the study demonstrated that there are two modes of instability that persist during much of the operating speed range, and one of the modes exhibits serious subsynchronous vibration levels at the higher speeds. The first unstable mode builds up at very low speeds forming a conical shape, where both rotor shaft ends whirl forward out-of-phase. The second unstable mode has a cylindrical shape with slight bending, where both rotor ends whirl forward in-phase. The outcome of the study is that the inner surface of the bearing has direct influence on the turbocharger dynamic stability. However, a fixed hydrodynamic bearing may not give total linear stability of the system if it is used without additional damper.
The second method is to analytically design flexible damped bearing-supports in order to improve the dynamic characteristics of the rotor-bearing system. The finite-element model of the turbocharger rotor with linearized bearing dynamic coefficients is used to solve for the logarithmic decrements and hence the stability map. The design process attempts to find the optimum dynamic characteristics of the flexible damped bearing-support that would give best dynamic stability of the rotor-bearing system. The method is successful in greatly improving the dynamic stability of the turbocharger and may also lead to a total linear stability throughout the entire speed range when used besides the enhanced-performance hydrodynamic bearings.
The study also presents a new method for improving the dynamic stability by inducing the turbocharger rotor unbalance in order to suppress the subsynchronous vibrations. The finite-element model of the turbocharger rotor with floating-ring bearings is numerically solved for the nonlinear time-transient response. The compressor and the turbine unbalance are induced and the dynamic stability is computed. The turbocharger model with linearized floating-ring bearings is also solved for eigenvalues and eigenvectors to predict the modes of instability. The linear analysis demonstrates that the forward whirling mode of the floating-ring at the compressor end becomes also unstable at the higher turbocharger speeds, in addition to the unstable forward conical and cylindrical modes. The numerical predictions are also compared to the former experimental results of a typical turbocharger. The results of the study show that the subsynchronous frequency amplitude of the dominant first mode is reduced when inducing either the compressor or the turbine unbalance at a certain level.
In addition to the study of the stability improvement methods, the dissertation investigates the other internal and external effects on the turbocharger rotor-bearing system. The radial aerodynamic forces that may develop inside the centrifugal compressor and the turbine volutes due to pressure variation of the circulating gas are numerically predicted for magnitudes, directions, and locations. The radial aerodynamic forces are numerically simulated as static forces in the turbocharger finite-element model with floating-ring bearings and solved for nonlinear time-transient response. The numerical predictions of the radial aerodynamic forces are computed with correlation to the earlier experimental results of the same turbocharger. The outcomes of the investigation demonstrated a significant influence of the radial aerodynamic loads on the turbocharger dynamic stability and the bearing reaction forces. The numerical predictions are also compared to the former experimental results for validation.
The external effect of the engine-induced vibration on the turbocharger dynamic stability is studied. The engine-induced excitations are numerically simulated as time-forcing functions on the rotor-bearings of the turbocharger finite-element model with floating-ring bearings in order to solve for the nonlinear time-transient response. The compressor radial aerodynamic forces are combined to the engine-induced excitations to numerically predict the total nonlinear transient response. The results of the study show that there are considerable amplitudes at the engine-excitation frequency in the subsynchronous region that may also have similar amplitude at the second harmonic. Additionally, the magnitudes of the engine-induced vibration have an effect on the turbocharger dynamic stability. The numerical predictions are compared to the former experimental tests for turbocharger dynamic stability. / Ph. D.
|
3 |
Analysis of Automotive Turbocharger Nonlinear Response Including BifurcationsVistamehr, Arian 2009 August 1900 (has links)
Automotive turbochargers (TCs) increase internal combustion engine power and
efficiency in passenger and commercial vehicles. TC rotors are usually supported on
floating ring bearings (FRBs) or semi-floating ring bearings (SFRBs), both of which are
inexpensive to manufacture. However, fluid film bearings are highly nonlinear
components of TC units and contribute to the complex behavior (i.e. bifurcations and
frequency jumps between a first whirl frequency and a second whirl frequency) of the
entire rotor-bearing system (RBS). The frequency jump phenomenon concerns the TC
manufacturing industry due to increased levels of noise generation. This thesis presents
progress on assessing the effects of some bearing parameters and operating conditions
on the RBS dynamic forced performance and the frequency jump phenomenon.
A fluid film bearing model is integrated into a finite element rotordynamics
computational model for numerical prediction of the TC linear and nonlinear (time
transient) forced response. Since automotive TCs operate with variable rotational speed,
predictions are conducted with shaft acceleration/deceleration.
Over most of its operating speed range, TC rotor nonlinear response predictions
display two subsynchronous whirl frequencies w1 and w
2 representing a conical mode
and a cylindrical bending mode, respectively. At low shaft speeds w1 is present up to a
shaft speed (Omega bifurcation), where there is a frequency jump from w1 to w
2. The second whirl
frequency may persist up to the highest shaft speeds (depending on operating
conditions). Results show during rotor deceleration the Omega bifurcation may be different from
the one during rotor acceleration (hysteresis).
Predictions show the following factors delay the Omega bifurcation: increasing oil supply
pressure, decreasing oil supply temperature, and increasing shaft acceleration. Also, rotor imbalance distribution greatly affects Omega bifurcation and the shaft amplitude of total
motion.
Overall, this study shows the sensitivity of bifurcations and frequency jump
phenomenon in TC nonlinear response due to various bearing parameters and operating
conditions. Further analysis is required to generalize these findings and to assess the
effect of other bearing parameters (i.e. clearances, outer film length, ring rotation, etc.)
on this phenomenon. In addition further validation of the predictions against test data is
required for refinement of the predictive tool.
|
4 |
Static characteristics and rotordynamic coefficients of a four-pad tilting-pad journal bearing with ball-in-socket pivots in load-between-pad configurationHarris, Joel Mark 15 May 2009 (has links)
Static characteristics and rotordynamic coefficients were experimentally
determined for a four-pad tilting-pad journal bearing with ball-in-socket pivots in loadbetween-
pad configuration. A frequency-independent [M]-[C]-[K] model fit the
measurements reasonably well, except for the cross-coupled damping coefficients. Test
conditions included speeds from 4,000 to 12,000 rpm and unit loads from 0 to 1896 kPa
(0 to 275 psi).
The test bearing was manufactured by Rotating Machinery Technology (RMT),
Inc. Though it has a nominal diameter of 101.78 mm (4.0070 in.), measurements
indicated significant bearing crush with radial bearing clearances of 99.6 μm (3.92 mils)
and 54.6 μm (2.15 mils) in the axes 45º counterclockwise and 45º clockwise from the
loaded axis, respectively. The pad length is 101.6 mm (4.00 in.), giving L/D = 1.00.
The pad arc angle is 73º, and the pivot offset ratio is 65%. The preloads of the loaded
and unloaded pads are 0.37 and 0.58, respectively.
A bulk-flow Navier-Stokes model was used for predictions, using adiabatic
conditions for the bearing fluid. Because the model assumes constant nominal
clearances at all pads, the average of the measured clearances was used as an estimate.
Eccentricities and attitude angles were markedly under predicted while power loss was
under predicted at low speeds and very well predicted at high speeds. The maximum detected pad temperature was 71ºC (160ºF) and the rise from inlet to maximum bearing
temperature was over predicted by 10-40%.
Multiple-frequency force inputs were used to excite the bearing. Direct stiffness
and damping coefficients were significantly over predicted, but addition of a simple
stiffness-in-series model substantially improved the agreement between theory and
experiment. Direct added masses were zero or negative at low speeds and increased
with speed up to a maximum of about 50 kg; they were normally greater in the unloaded
direction. Although significant cross-coupled stiffness terms were present, they always
had the same sign. The bearing had zero whirl frequency ratio netting unconditional
stability over all test conditions. Static stiffness in the y direction (obtained from steadystate
loading) matched the rotordynamic stiffness Kyy (obtained from multiple-frequency
excitation) reasonably at low loads but poorly at the maximum test load.
|
Page generated in 0.0763 seconds