Spelling suggestions: "subject:"forest anda word science"" "subject:"forest ando word science""
1 |
Use, physiology and genetic characterisation of selected natural populations of Adansonia Digitata in MalawiMunthali, Chimuleke Rowland Yagontha 03 1900 (has links)
Thesis (PhD For) (Forest and Wood Science))--Stellenbosch University, 2012. / ENGLISH ABSTRACT: See full text for abstract / AFRIKAANSE OPSOMMING: Sien volteks vir opsomming
|
2 |
A method for the non-destructive determination of the knotty core sizes of standing Pinus patula trees, based on ring width assessments at breast height and the pruning historyMunalula, Francis 03 1900 (has links)
Thesis (MScFor (Forest and Wood Science))--University of Stellenbosch, 2010. / ENGLISH ABSTRACT: The objective of this study was to develop and assess a methodology of using pruning information (age and height) and ring width measurements on increment core samples taken at breast height from standing pruned Pinus patula trees for modeling the knotty core sizes in the pruned section of a tree. A total of 170 trees from 17 compartments, representing a wide variety of growth sites from the Mpumalanga escarpment, were selected and destructively sampled. Sample trees were selected to represent the productive timber volume available from the compartments using stratified sampling. Sample discs were removed at breast height (1.3m) and at six meter height. After drying and sanding, the cross-sectional surfaces of one surface of each of the discs were scanned on a document scanner and the ring widths measured, using an image analysis program. A preliminary study, using 30 discs, was undertaken to ascertain the appropriate number of radii per disc to measure. A comparison between results of two opposite radii, as opposed to four radii, showed that the difference in mean ring width resulting from the two approaches was statistically not significant. In practice this means that for ring width assessment, sampling of increment cores opposite to one another at breast height would be sufficiently accurate to study average ring width variation across the radius of a tree. A study was also conducted to determine to what accuracy ring widths at six metre height could be predicted from breast height measurements. It was shown that cumulative growth at six metre height can be predicted from cumulative growth at breast height, site index and cambial age at breast height as independent variables (R2 = 0.96). Ring width measurements at breast height can, therefore, be used to predict incremental growth throughout the pruned section. Combined with available information on the pruning history of a stand (pruning heights and pruning age), this study proved that quantitative knowledge on incremental growth can be used as a basis for estimating changes in knotty core sizes along the entire pruned section of the stem.
Analysis of variation for the entire data set from ring width measurements showed that there was far greater variation in knotty core percentages (the percentage of diameter occupied by knotty core) between different compartments than within compartments. Within a tree, the knotty core percentages between three stem sections, 0-2.4m, 2.4–4.8m, and 4.8-7m, were found to increase significantly from the bottom section (49.1%) to the top section (65.4%).
A single 2.4m log from the pruned section of each tree was removed and processed into sawn timber at a sawmill. After drying of the boards, a sub-sample of sawn boards from 17 logs, one log from each compartment, was selected and reconstructed into log form. From the reconstructed log (reconstructed to represent their original position in the log) the actual knotty core size was estimated by measuring the distance from the pith to the end of the branch stub. A comparison of the actual knotty core sizes and the modelled knotty core sizes of a sub-sample of trees showed only a modest relationship (R2 = 0.62). Reasons for this might be variability in pruning quality, inaccurate pruning records, nodal swellings and the methodology used to measure the actual knotty core sizes.
Knowledge of knotty core sizes of standing trees can be used for many different purposes. Two applications that were assessed and found to be useful include decision support for cross cutting logs and for sawmill production planning purposes. Sawmill simulation software was used to evaluate value -and grade recoveries under different scenarios. Results showed that cross-cutting the pruned sections of logs from a compartment with large within-tree knotty core size variation into shorter logs, as opposed to keeping the pruned sections as single logs, result in increases in grade and value recovery. It was also shown that sawing of pruned logs from compartments with relatively small knotty cores, results in much better grade recoveries than logs from compartments with relatively large knotty cores (this information will be useful for production planning purposes). It can be concluded that the methodology proposed to reconstruct knotty cores from tree ring measurements has the potential to be used as a decision aid in the forest and forest products industry.
|
3 |
Growth and physiological parameters related to shoot dieback in Pterocarpus angolensis DC seedlingsMwitwa, Jacob Pacific 04 1900 (has links)
Thesis (PhD)--Stellenbosch University, 2004. / ENGLISH ABSTRACT:Six experiments, five in the glasshouse and one in the field near Nelspruit, were
carried out to ascertain the effect of factors related to shoot die-back, and of water
treatments on the growth and physiological responses of Pterocarpus angolensis
seedlings. The study was undertaken to broaden the knowledge and understanding of
the phenomenon of shoot die-back in order to enhance our ability to regenerate the
species. The following experiments were carried out
(a) Assessment of biomass accumulation; anatomical characteristics of the shoot
apical meristem; foliar, stem and root concentration of micro- and macronutrients
associated with each phenophase,
(b) Effect of seedling age and seed source on the occurrence of shoot die-back
under field conditions;
(c) Water treatment effects on ChI. afluorescence traits of£'. angolensis seedlings
obtained by assessing the fluorescence yield of photosynthetic samples
subjected to dark- and light-adaptation;
(d) Genetic variation in shoot die-back and other traits of sixteen halfsib families
of £.. angolensis from Malawi, Namibia and Zambia grown over two die-back
seasons.
Experiments conducted revealed the following
1. Patterns of growth observed in phenophases are indicators of seasonal changes in
annual biomass allocation to the shoot and root. Phenophases such as leaf loss
and stem senescence, whether shoot die-back occurs completely or not, are
directly related to the decline in above-ground biomass and declined rate of
increase in root biomass respectively. Leaf flush, expansion and maturation result
in increased biomass accumulation whilst shoot die-back has a minimal downregulatory
effect on root biomass accumulation compared to the shoot. Shoot dieback
is not sudden, therefore from the first day of germination, seedlings
synchronise growth and development with the occurrence of shoot die-back.
2. Phenophasic concentration of foliar N, Ca and Mg, stem Fe and Cu and root
concentrations of P, K, Mg, Fe and B are associated with shoot die-back. Patterns
of mineral nutrient concentration obtained in foliage and roots but to a lesser
extent in the stem, may be related to nutrient remobilisation during shoot dieback.
Higher relative mineral nutrient changes during leaf yellowing and shoot
die-back may be an indication of the removal of significant volumes of mobile
nutrients from senescing tissues.
3. The volume of the shoot apex of E. angolensis remains constant during different
phenophases which points to seasonal uniformity in the size of the apical dome.
Changes in phenology associated with declined growth, or shoot die-back, is
revealed through declined cell number in the tunica which is a reflection of
declined mitotic activity.
4. Shoot die-back occurs in all seedlings from nursery stock planted under field
conditions and all seedlings of up to two years experience complete shoot dieback.
Shoot die-back takes place irrespective of seed source or the age of nursery
stock that is planted. Survival after the first shoot die-back is normally low. Water
treatments had no significant effect on the function of PSIJ reaction centres of P.
angolensis nursery seedlings. In the case of both dark- and light-adapted leaves,
water treatment had no significant effect on the measured Chi. a fluorescence
parameters or the calculated parameters (specific activities, phenomenological
fluxes, structure-function and performance indexes and drivingforces).
5. Water treatments affect the shape of ChI. a fluorescence transients of lightadapted
compared to that of dark-adapted photosynthetic samples of E.
angolensis. No significant water treatment effect was obtained for extracted and
technical Chi. afluorescence parameters, specific fluxes, quantum efficiencies and
phenomenological fluxes. Quantum yield, relative electron transport and quantum
yield limitation, de-excitation rate constants, structure-function, performance
indexes and driving forces were also not significantly different across water
treatments.6. Genetic variation was observed to exist among 16 halfsib families from Malawi,
Namibia and Zambia. High heritabilities were obtained for shoot die-back and
other traits, indicating that shoot die-back is genetically controlled. The trait is
passed from parents to offspring and it is highly probable that it occurs,
throughout its natural range, in all seedlings. Since shoot die-back is genetically
programmed, it remains crucial to the ability of a seedling to regenerate in the
following rainy season / AFRIKAANSE OPSOMMING:Ses eksperimente, vyf in die glashuis en een in die veld naby Nelspruit, is uitgevoer
om die effek van faktore wat verwant is aan die terugsterwing van lote op saailinge,
sowel as om die effek van waterstres op die groei en fisiologiese responsies van
Pterocarpus angolensis saailinge, te ondersoek. Die studie is ondemeem om die
kennis en begrip aangaande die regenerasie-dinamika van die spesies te verbeter. Die
volgende eksperimente is uitgevoer:
(a) Evaluering van die effek van jisiologiese veranderings op biomassa; blaar-,
stam- en wortelkonsentrasies van spoor- en makro-voedingselemente, en
anatomiese eienskappe van die apikale meristeem van die lote.
(b) Effek van saailingouderdom en saadbron op die voorkoms van lootterugsterwing
onder veldtoestande.
(c) Waterbehandelingseffekte op Chi. ajluorisensie eienskappe van ,e. angolensis
saailinge wat verkry is deur die jluorisensie te evalueer van fotosintesemonsters
wat aan donker- en lig-adaptasies onderwerp is.
(d) Genetiese variasie in loot-terugsterwing en ander groei-eienskappe van 16
halfsib families van ,e. angolensis vanaf Malawi, Namibia en Zambia wat
gekweek is oor twee terugsterj-seisoene.
Die eksperimente het die volgende aan die lig gebring:
1. Groeipatrone waargeneem gedurende die fenofases is indikatore van seisoenale
veranderings in jaarlikse biomassa allokasies aan die loot en die wortels.
Fenofases soos blaarverlies en lootafsterwing, ongeag of loot-terugsterwing
volledig is of nie, is direk verwant aan die afname in bogrondse biomassa en
afnemende tempo van toename in wortelbiomassa respektiewelik. Bottende blare,
vergroting en rypwording van blare lei tot toenemende biomassa akkumulasie
terwyl loot-terugsterwing 'n minimale afskalende effek op akkumulasie van
wortelbiomassa het in vergelyking met die van die loot. Loot-terugsterwing is nie
skielik, met ander woorde vanaf die eerste dag van ontkieming sinchroniseer
saailinge groei en ontwikkeling met die voorkoms van loot-terugsterwing.
2. Fenofase konsentrasies van en veranderings in blaar N en Ca en loot Fe, asook
veranderings in waargenome wortel N, K, Ca, Mn, Cu, Zn en B is sterk geassosieer
met loot-terugsterwing. Patrone van minerale
voedingselementkonsentrasies wat in blare en wortels, en in minder mate in die
loot, verkry is, mag direk verwant wees aan hermobilisering van
voedingselemente gedurende loot-terugsterwing. Hoe relatiewe minerale
voedingselementveranderings gedurende die vergeling van blare en lootterugsterwing
mag 'n indikasie wees van die verwydering van betekenisvoUe
hoeveelhede mobiele nutriente vanaf sterwende weefsel.
3. Die volume van die groeipunt van r. angolensis bly konstant gedurende
verskillende fenofases wat dui op seisoenale uniformiteit in die grootte van die
apikale koepel. Veranderings in fenologie ge-assosieer met afnemende groei, of
loot-terugsterwing, word gerejlekteer deur afnemende selgetaUe in die tunika wat
dui op afnemende mitotiese aktiwiteit.
4. VoUedige loot-terugsterwing kom voor in aUe saailinge vanaf die kwekery wat in
die veld geplant word tot op die ouderdom van twee iaar. Dit kom voor angeag
van saadbron of ouderdom van saailinge ten tye van planting. Oorlewing na
aanvanklike loot-terugsterwing is normaalweg laag.
5. Water behandelings het geen beduidende effek op die funksie van PSII
reaksiesentra van r. angolensis kewekery-saailinge gehad. Vir beide donker- en
lig-aangepaste blare is geen beduidende waterbehandelingseffek verkry vir
waargenome ChI. a jluoresensie parameters of die berekende parameters
(spes ifieke aktiwiteite, jenomenologiese jlukse, struktuur-funksie-indekse,
"perjormance-indekse oj" driving forces" ).
6. Genetiese variasie tussen 16 halfsibfamilies vanaf Malawi, Namibie en Zambie is
verkry vir loot-terugsterwing en ander groei-eienskappe. Dit dui op genetiese
beheer van terugsterwing en dat die eienskap oorerjbaar is, en waarskynlik in die
hele natuurlike verspreidingsgebied van die spesies in aUe saailinge voorkom.
Aangesien loot-terugsterwing gene ties geprogrammeer is, is dit noodsaaklik vir
die vermoe van die plant om in die volgende reenseisoen te regenereer.
|
4 |
The variation and prediction of structural timber properties of standing Pinus patula trees using non-destructive methodsWessels, Coenraad Brand 04 1900 (has links)
Thesis (PhD(For))--Stellenbosch University, 2014. / ENGLISH ABSTRACT: Pinus patula is the most intensively planted conifer in the tropics and sub‐tropics. In South Africa
Pinus patula plantations are the main saw‐log resource for structural lumber production. Improved
intensive silvicultural practices and tree breeding have resulted in marked increases in the rate of
growth. To reap the financial benefits of the faster growth, plantation managers are more and more
inclined to reduce rotation ages, which inevitably results in the production of higher proportions of
juvenile wood at final harvest, and lumber which often does not meet the minimum requirements
for stiffness for structural lumber. Knowledge of the variation and the accurate prediction of the
mechanical properties of the timber of standing trees can have various benefits for growers and
processors of trees. It can be used for tree allocation to different processing facilities, for processing
production planning, and to assist tree breeders to screen and select for superior breeding material.
The objectives of this study were (1), to examine the within‐ and between‐tree variation in wood
properties of young South African grown Pinus patula trees known to have important impacts on the
suitability of sawn lumber for structural purposes and (2), to develop empirical prediction models for
the flexural lumber properties from standing Pinus patula, based on variables that could be assessed
non‐destructively from standing trees.
Sample material was obtained from 170 trees (16‐20 years old) established in 17 compartments
along the Mpumalanga escarpment of South Africa. A large number of variables which could be
obtained non‐destructively from the trees while they were still standing, were measured. The trees
were subsequently felled and two logs, 2.1 m in length, were extracted from each tree at two height
positions. The 340 logs were processed into 1402 pieces of lumber for further measurements and
destructive testing. Results showed that the mean modulus of elasticity measured on edge (MOEedge) was far below the
limits set for structural grade softwood timber in South Africa. All the desirable properties for
structural lumber improved with distance from the pith with the exception of the 5th percentile value
for modulus of rupture (MOR), which was higher at the pith than for the boards processed adjacent
to the pith. Boards processed from the lower part of the stem were superior in most of the
important properties compared to those higher up in the stem.
Separate multiple regression models for predicting the average dynamic MOE (MOEdyn) of individual
boards, trees and compartments were developed. The models managed to explain 68%, 60% and
95% of the variation in MOEdyn respectively. The models developed for MOR explained 40% and 42%
of variability at board and tree level respectively. At compartment level, 80% of the variation in the
5th percentile MOR value could be explained by the model. Sensitivity analyses showed that site
index at base age of 10 years, acoustic time‐of‐flight, wood density and ring width were the most
influential variables in the MOE models. The models indicated that tree slenderness during early
growth seems to play a major role in determining the dynamic MOE and MOR of lumber. This is in
agreement with Euler’s buckling theory and the bending stress theory.
Microfibril angle (MFA) and density were measured on radial strips taken from a sub‐sample of trees
with the Silviscan 3 technology. The mean microfibril angle per year ring in Pinus patula varied
between 7o and 29o. In general MFA decreased with distance from the pith and height above ground
level. A multiple regression model including microfibril angle, density and ring width explained 71%
of the variation in the dynamic MOE of boards. Sensitivity analysis on the model showed that
microfibril angle and density had roughly equal influences on predicting the MOEdyn of Pinus patula
boards. / AFRIKAANSE OPSOMMING: Pinus patula is die mees aangeplante naaldhoutspesie in die tropiese en sub‐tropiese areas van die
wêreld. Dit is die grootste bron van saagblokke vir die produksie van strukturele hout in SA.
Intensiewe boskultuurpraktyke en boomteling het gelei tot ‘n merkbare verhoging in die groeitempo
van die spesie. Plantasiebestuurders is gevolglik geneig om rotasie‐ouderdomme te verlaag, wat lei
tot ‘n groter persentasie jeughout wat nie aan die minimum styfheidvereistes van strukturele hout
voldoen nie. Kennis van die variasie en die akkurate voorspelling van die meganiese eienskappe van
staande bome kan voordele inhou vir beide die verbouers en verwerkers van bome. Dit kan
byvoorbeeld van hulp wees met die toewysing van bome aan verwerkingsfasiliteite, vir
produksiebeplanning, en vir ondersteuning met die keuse van teelmateriaal vir boomtelers.
Die doelwitte van hierdie studie was (1), om die binne– en tussenboomvariasie in die
houteienskappe, wat ‘n bepalende invloed het op die geskiktheid van jong Suid Afrikaanse Pinus
patula bome vir strukturele hout produksie, te ondersoek en (2), om empiriese modelle vir die
voorspelling van die buigeienskappe van planke te ontwikkel, gebaseer op veranderlikes wat niedestruktief
op staande Pinus patula bome ge‐evalueer is.
Monsters vir die studie is verkry vanaf 170 bome (16‐20 jaar oud), geplant in 17 vakke op die
Mpumalanga platorand van Suid Afrika. ‘n Groot aantal veranderlikes is nie‐destruktief gemeet op
die staande bome waarna die bome gevel is en twee saagblokke, 2.1m in lengte, is op twee hoogte
posisies uit elke boom verwyder. Die 340 blokke is verwerk tot 1402 planke vir verdere metings en
destruktiewe toetse.
Resultate het getoon dat die gemiddelde modulus van elastisiteit gemeet op die dwarskant
(MOEedge) aansienlik laer was as wat vereis word vir strukturelegraad hout in Suid Afrika. Al die
gewenste eienskappe het toegeneem met afstand vanaf die murg behalwe die 5de persentiel
breekmodulus (MOR), wat hoër was vir murgplanke as vir aangrensende planke. Planke afkomstig
van die laer dele van die stam het oor die algemeen beter eienskappe gehad as planke afkomstig van
die hoër dele. Veelvuldige regressiemodelle kon 68%, 60% en 95% van die variasie in die gemiddelde dinamiese
MOE (MOEdyn) op die vlak van onderskeidelik individuele planke, bome en vakke verklaar. Die
modelle vir MOR kon 40% en 42% van die variasie op onderskeidelik plank‐ en boomvlak verklaar.
Die model vir 5de persentiel MOR van vakke kon 80% van die variasie verklaar. ‘n
Sensitiwiteitsanalise het aangetoon dat groeiplekindeks op ouderdom 10, akoestiese vlugtyd,
digtheid en jaarringwydte die belangrikste veranderlikes was wat MOEdyn beïnvloed het. Die modelle
het aangetoon dat die slankheid van bome tydens vroeë groei vermoedelik ‘n belangrike invloed op
die MOEdyn en MOR van planke het. Dit is in ooreenstemming met Euler se knikteorie en die
buigsterkteteorie.
Die mikrofibrilhoek en digtheid van ‘n steekproef van die bome is gemeet met die Silviscan 3
apparaat. Die gemiddelde mikrofibrilhoek per jaarring het tussen 7 o en 29o varieer. Hierdie variasie
was hoofsaaklik afhanklik van boomhoogte en aantal jaarringe vanaf die murg. ‘n Veelvuldige
regressiemodel wat mikrofibrilhoek, digtheid en jaarringwydte insluit, kon 71% van die variasie in
MOEdyn verklaar. ‘n Sensitiwiteitsanalise op die model het aangetoon dat mikrofibrilhoek en digtheid
ongeveer ewe belangrik was wat betref hulle invloed op die voorspelde MOEdyn van Pinus patula
planke.
|
5 |
Multi-stem mechanised harvesting operation analysis : application of discrete-event simulationHogg, Glynn A. 03 1900 (has links)
Thesis (MScFor (Forest and Wood Science))--University of Stellenbosch, 2009. / In this study, a multi-stem harvesting operation was observed and time studies carried out on
its machines. A stump-to-mill simulation model (System 1) of this system was subsequently
built using a commercial simulation software package (Arena 9) and data from the time
studies were incorporated into the model. Following this, another two stump-to-mill multistem
models (Systems 2 and 3) were built using the same simulation software package and
parameterised input data. These two models represented hypothetical systems which were
tested against System 1 and against one another in terms of machine balance within the
system, production rate and cost. System 2 used identical equipment to System 1, but
practised alternative operating methods. Some of System 3’s machines and operating
methods differed from those in Systems 1 and 2.
The objectives of the study were to:
1. Determine whether or not commercial simulation software can be used to adequately
model forest harvesting operations.
2. Gauge potential system balance, production and/or cost improvement/s achievable
through application of simulation-based operation adjustments.
3. Define beneficial equipment operation and application practises for multi-stem systems.
4. Through construction and use of the commercial software package in producing forest
harvesting operation models, evaluate the software’s usability in terms of its
applicability to and ease of use in such models, as well as its ability to meet forestrybased
user requirements.
|
6 |
Some aspects of the ecology of bushbuck (Tragelaphus scriptus Pallas 1776) in the southern CapeOdendaal, Pieter Benjamin 03 1900 (has links)
Thesis (MSc (Forestry))--Stellenbosch University, 1977. / The social biology and habitat selection of bushbuok, Tragelaphus scriptus, was investigated by ra~io-tracking five bushbuck in the same area, three males and two females. A large degree of over= lap of home ranges was shown to exist. Evidence is advanced to suggest the existence of a time-mechanism to separate individuals whose home ranges overlap. Subadult males have larger home ranges than females. Crepuscular peaks were exhibited in the activity pattern of the study animals. Of 1 380 animals observed in this study, 61% occurred singly and 29% in twos. Breeding is probably throughout the year with peaks in the rate of parturition in April, July-August and November. Bushbuck show a need for canopy cover during the day but will frequent areas with lateral cover or even no cover during the night. Although the indigenous forests are of great importance to bushbuck, evidence was found that they can exist in a very much modified environment such as pinus spp stands. Bushbuck occur at densities of about 3-5 animals!k~ in the Southern Cape. They feed on a wide array of food plants but are mostly browsers with grasses constituting only about five per cent of the diet. A surprisingly high incidence of mushrooms were found in the diet during winter. Some indications exist of the possible presence of sub-optimal feeding conditions during winter. Information is also presented on nutritional element levels, external parasites and morphological data.
|
7 |
Biomass prediction models for Colophospermum Mopane (Mopane) in BotswanaMutakela, Patrick Silishebo 03 1900 (has links)
Thesis (MFor (Forest and Wood Science))--University of Stellenbosch, 2009. / The aim of this study was to develop biomass prediction models for the determination of total
aboveground biomass for mopane at three (3) study sites in Botswana. Thereafter, based on the pooled
data from the three (3) study sites, recommend one cross-site biomass prediction model that could be
used for the indirect estimation of the total aboveground biomass for mopane in Botswana.
All the data were collected by destructive sampling from three (3) study sites in Botswana. Stratified
random sampling was based on the stem diameter at breast height (1.3 m from the ground). A total of
30 sample trees at each study site were measured, felled and weighed. The 30 sample trees were
distributed equally between six DBH classes (Five sample trees per DBH class). Thereafter, using the
data from these sample trees, site-specific biomass prediction models for the indirect estimation of
total aboveground biomass for mopane were developed as a function of the following independent
variables: stem diameter at 0.15 m from the ground; stem diameter at 1.3 m from the ground; stem
diameter at 3 m from the ground; crown diameter; and total tree height. The data from the sites were
pooled together to develop cross-site biomass prediction models as a function of the given independent
variables.
The biomass prediction model that provided the best fit at Serule was a linear equation estimated by
means of the stem diameter at 1.3 m, while in Sexaxa the biomass prediction model that provided the
best fit was estimated by means of the stem diameter at 0.15 m. The biomass prediction model that
provided the best fit at the Tamacha site was estimated by means of the stem diameter at 1.3 m. On
the basis of the collected data, cross-site biomass prediction models were developed. The cross-site
biomass prediction model that provided the best fit was developed from the stem diameter at 1.3 m.
This relationship was adopted as the prediction model for the indirect biomass estimation of
Colophospermum mopane (mopane) in Botswana.
|
8 |
Soil characterisation for teak (Tectona grandis) plantations in the Nzara district of Southern SudanOmbina, Christian Ahmed 12 1900 (has links)
Thesis (MScFor (Forest and Wood Science))--Stellenbosch University, 2008. / The characterization of soils in Nzara District of Southern Sudan in comparison to other tropical
teak growing countries (Tectona grandis) – in respect of extensions to existing and/or the
establishment of new teak plantations – were done by firstly considering the soils of three
existing plantations: Yoboa, Mabarizinga and Nagondi, and secondly by considering soils
outside and inside the existing teak plantations in respect of land uses. From these soil
characterizations, it emerged that considerable positive returns can be expected from teak
plantings in the area as an investment, provided that appropriate site management is
implemented.
Climatic data of the Nzara area compared favorably with the climatic range of areas where teak
grows naturally and the world’s dominant producers: mean annual rainfall 1350-1600 mm with a
distribution over 6-8 months compares well with that of Myanmar (1250-3750 mm) and
Indonesia (1511-2108 mm) both with at least 3 months of dry season. The mean annual
temperature of 28-350C compares well with 15-410C and 30-320C of Myanmar and Indonesia
respectively.
The Yoboa and Mabarizinga sites should be prioritized as they appear slightly more suitable than
the Nagondi site. All three sites have a dominant soil texture of Sandy Clay Loam similar to
Sandy Loam of most areas of other tropical countries where teak is growing well (such as India,
Indonesia and Nigeria). Yoboa and Mabarizinga however distinguish themselves by having the
highest soil pHwater values range from 6.4±0.56 and 6.04±0.7 in top soils; 5.91±0.5 and
5.46±0.61 in subsoils at Yoboa and Mabarizinga respectively; the highest soil organic matter
content 1.8±0.34% and 1.92±0.43% in topsoil 0.89±0.16% and 1.13±0.19% in subsoils; as well
as the highest P content in both available (0.09±0.04% and 0.03±0.04% for topsoils) and total
forms (1.19±0.26% and 0.9±0.3% also on topsoils). These values though very low in absolute
terms, are not much different from those of other tropical teak-growing countries. Management
strategies intended to preserve and improve the present status, particularly the protection of top
soil horizons against mainly water erosion, would be able to boost the site productivity.
|
9 |
Processing of wood and agricultural biomass for gasificationMalatji, Pholoso 12 1900 (has links)
Thesis (MScFor (Forest and Wood Science))--University of Stellenbosch, 2009. / ENGLISH ABSTRACT: Wood waste, when used for gasification is commonly pressed into briquettes, especially if no uniform particle size is available. This densification reduces problems of handling, storage and transportation and improves the combustion performance because of a more uniform fuel size. Briquettes have to be mechanically strong enough to be handled. Cohesive strength is provided by residual moisture and lignin present in the wood. The lignin acts as a natural binder. However, the briquetting process becomes more complicated if one wants to add other agricultural waste products that do not necessarily contain lignin as binders,,
In this study we have investigated various briquetting process parameters, such as mixing ratios of briquettes containing wood chips, grape skins and chicken litter, moisture content and press time. The aim was to determine the optimum process parameters that allow the production of briquettes, containing a blend of biomaterials that are mechanically stable to allow further handling but yield high energy content at the same time. / AFRIKAANSE OPSOMMING: Wanneer houtafval vir vergassing gebruik word en die partikelgrootte daarvan varieer, word die materiaal normaalweg in ’n brikket gedruk. Brikketvorming vergemaklik opberging, hantering en vervoer. Weens die meer uniforme grootte en vorm van die brikkette is verbranding daarvan heelwat meer doeltreffend. Brikkette moet egter meganies sterk genoeg wees om hanteer te kan word. Die kohesiewe sterkte word deur residuele vog en lignien, wat as natuurlike bindmiddel in hout aanwesig is, verskaf. Indien ander materiale soos landbouafval, wat noodwendig geen lignien bevat nie egter gebruik word, word die brikketvormingsproses meer kompleks.
In hierdie ondersoek is verskeie brikketvormingsparameters evalueer. Mengverhoudings van brikkette wat houtspaanders, druiwedoppe en hoendermis bevat, asook invloed van materiaalvoggehalte en druktyd is bestudeer. Die doel was om die optimale materiaal- en prosesparameters vas te stel wanneer ’n mengsel van biomateriale gebruik word om brikkette te lewer wat meganies sterk genoeg is maar steeds die hoogste energieopbrengs lewer. / Centre for Renewable and Sustainable Energy Studies
|
10 |
Investigation into the use of meta-heuristics in the optimisation of log positioning during sawmill processingDu Plessis, Johan de Villiers 12 1900 (has links)
Thesis (MSc (Forest and Wood Science))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: The percentage yield of sawn timber recovered from logs has a large influence on the profitability of a
sawmill. The positioning of the log as it is fed into the primary breakdown saw is one of the factors that
impacts on the volume recovery percentage. The log’s position can be adjusted by changes in rotation,
offset and skewness and depending on the ranges and increments used for these variables, the number
of possible combinations can become substantial. In a sawmill the time available to assess possible log
positions is limited and different strategies can be followed to arrive at an optimal or close‐to‐optimal
positioning solution without an exhaustive evaluation of solutions. Meta‐heuristics are sometimes used
to arrive at solutions for combinatorial optimisation problems in a limited time. The effectiveness of this
approach on the optimisation of timber volume recovery based on log form is evaluated in this study
using sawmill simulation data of sixty SA pine logs.
A new meta‐heuristic, for convenience named the Tentacle algorithm, was developed specifically for the
problem of log positioning optimisation. The results obtained with the Tentacle algorithm was compared
with results from three existing meta‐heuristics i.e. the Simulated Annealing algorithm, the Population
Based Incremental Learning algorithm and the Particle Swarm Optimisation algorithm, in terms of its
efficiency and effectiveness in finding good log positioning solutions in a limited time. A fifth method,
that of exhaustively searching smaller, high quality areas around the centered and “horns‐up” and
“horns‐down” positions in the search space was compared to that of using the meta‐heuristic
algorithms. In terms of volume recovery, the Tentacle algorithm performed, on average, the best of the
four algorithms evaluated. However, exhaustive searches in the smaller, high quality areas in the search
space, outperformed the algorithms. / AFRIKAANSE OPSOMMING: Die herwinningspersentasie van gesaagde planke uit saagblokke het ‘n groot invloed op die
winsgewendheid van ‘n saagmeul. Die posisionering van die blok in die primêre saag is een van die
faktore wat die herwinningspersentasie beïnvloed. Die blok se posisie kan verstel word deur
veranderinge in rotasie, oplyning en skeefheid. Afhangend van die veld ‐en inkrementgrootte kan die
hoeveelheid moontlike kombinasies beduidend wees. In ‘n tipiese saagmeul is die beskikbare tyd om
moontlike posisies te evalueer beperk en verskeie strategieë kan gevolg word om optimale of nabyoptimale
kombinasies te bereik sonder om alle moontlike kombinasies te evalueer. Meta‐heuristieke
word soms gebruik om in ‘n beperkte tyd oplossings te vind vir kombinatoriese optimeringsprobleme.
Die doeltreffendheid van hierdie metode by die optimering van herwinningspersentasie gebaseer op
blokvorm is in hierdie studie ondersoek. Dit is met behulp van saagmeulsimulasiedata soos van sestig SA
dennehoutblokke verkry, uitgevoer.
‘n Nuwe meta‐heuristiek, genaamd die Tentakelalgoritme, is tydens hierdie studie spesifiek vir die
probleem van blokposisie‐optimering ontwikkel. Die resultate verkry met die Tentakelalgoritme is
vergelyk met drie bestaande meta‐heuristieke, nl. die “Simulated Annealing”‐algoritme, die “Population
Based Incremental Learning”‐algoritme en die “Particle Swarm Optimisation”‐algoritme in terme van
doeltreffendheid om goeie blokposisies in ‘n beperkte tyd te vind. ‘n Vyfde metode, die gebruik van ‘n
volledige ondersoek van verkleinde versamelings, rondom hoë‐kwaliteit areas in die soekarea, is
vergelyk met die gebruik van die meta‐heuristieke. Hierdie hoë‐kwaliteit areas word gevind rondom die
gesentreerde “horns‐up” en “horns‐down” posisies. Die Tentakelalgoritme het gemiddelde die beste
herwinningsresultate van die vier meta‐heuristieke wat ondersoek was gelewer. Die volledige ondersoek
van verkleinde versamelings in die hoë kwaliteit areas het egter die meta‐heuristieke oortref.
|
Page generated in 0.0883 seconds