O propósito deste trabalho é a modelagem experimental e estudo do controle do processo de hidroconformação de tubos. Assim, o trabalho visa o projeto e a construção de um dispositivo servo-controlado de hidroconformação de tubos com um sistema de controle digital. O trabalho compreende o projeto e a construção de um dispositivo a ser acoplado em uma prensa hidráulica, a instrumentação dos equipamentos usados e a implantação do sistema de controle automático do processo através de um computador PC e de placas de interface A/D e D/A. Os aplicativos de controle foram desenvolvidos em linguagem de alto nível no sistema operacional Windows. No projeto do aplicativo, inicialmente foram realizadas rotinas para testes do sistema em malha aberta. As demais rotinas são aquelas associadas às funções matemáticas do modelo fenomenológico do sistema de hidroconformação, aquelas destinadas ao controlador de malha fechada. O tipo de estratégia de controle a ser utilizada foi definida no decorrer do projeto e foi baseada em um modelo de processo não linear, linearizado em torno de cada ponto de operação. Para fins de obtenção do modelo nominal para o controlador, os atuadores e sensores tiveram suas dinâmicas desprezadas face a dinâmica do processo e suas curvas de processo foram levantadas experimentalmente. / This works aims is the experimental modeling of a tube hydroforming (THF) “T" branch, and de THF process automatic control study. Thus, the design and the construction of a servo-controlled hydraulic device for THF, with a automatic digital control system, is embedded in our objectives. Design and construction of device to append on a hydraulic press, implantation of the measurement equipment and implementation of the control system algorithms through a PC with I/O interface boards is necessary. Control algorithms were developed in Hi-level language for windows operating system. The application design was based on experimental initial tests performed with no feed-backing controlling mode. Routes related to phenomenological mathematical model of the THF process were validate against the literature database, and were devoted to the feed-backing controller mode. Control strategy to employ in final application was defined during the process calibration, based on the non-linear characteristics of the “T" branch THF. To obtain the final load path model sensors and cylinders had their dynamics neglected because the THF dynamic is very much higher, and had their behavior curves experimentally raised.

O propósito deste trabalho é a modelagem experimental e estudo do controle do processo de hidroconformação de tubos. Assim, o trabalho visa o projeto e a construção de um dispositivo servo-controlado de hidroconformação de tubos com um sistema de controle digital. O trabalho compreende o projeto e a construção de um dispositivo a ser acoplado em uma prensa hidráulica, a instrumentação dos equipamentos usados e a implantação do sistema de controle automático do processo através de um computador PC e de placas de interface A/D e D/A. Os aplicativos de controle foram desenvolvidos em linguagem de alto nível no sistema operacional Windows. No projeto do aplicativo, inicialmente foram realizadas rotinas para testes do sistema em malha aberta. As demais rotinas são aquelas associadas às funções matemáticas do modelo fenomenológico do sistema de hidroconformação, aquelas destinadas ao controlador de malha fechada. O tipo de estratégia de controle a ser utilizada foi definida no decorrer do projeto e foi baseada em um modelo de processo não linear, linearizado em torno de cada ponto de operação. Para fins de obtenção do modelo nominal para o controlador, os atuadores e sensores tiveram suas dinâmicas desprezadas face a dinâmica do processo e suas curvas de processo foram levantadas experimentalmente. / This works aims is the experimental modeling of a tube hydroforming (THF) “T” branch, and de THF process automatic control study. Thus, the design and the construction of a servo-controlled hydraulic device for THF, with a automatic digital control system, is embedded in our objectives. Design and construction of device to append on a hydraulic press, implantation of the measurement equipment and implementation of the control system algorithms through a PC with I/O interface boards is necessary. Control algorithms were developed in Hi-level language for windows operating system. The application design was based on experimental initial tests performed with no feed-backing controlling mode. Routes related to phenomenological mathematical model of the THF process were validate against the literature database, and were devoted to the feed-backing controller mode. Control strategy to employ in final application was defined during the process calibration, based on the non-linear characteristics of the “T” branch THF. To obtain the final load path model sensors and cylinders had their dynamics neglected because the THF dynamic is very much higher, and had their behavior curves experimentally raised.

The merit of this graduation thesis is to get known with a moulding technology - non rewirable bond to understand principle and design one-purpose riveting machine. To show aknowligement and orientation in literature create a design analyze features and disadvantages types of constuction and be able to assure stability and safety long life of a head frame. Pick up and one another put together suitable working units and be able to interpret the results.

Master’s thesis deals with the design of the drive of the press LKJP 630, the configuration is a fixed range by the construction of LKJP. The thesis was ordered by partnership with company ŽĎAS, which is introduced. The first part is devoted to analysis of solved problems, it primarily contains the overview on forming machines, used drives and a description of their main parts. The second part deals with the drive itself, there is accomplished the design and performed the strength analysis of the major parts of the drive. Drawing documentation and bill of materials are included.

This Master thesis deals with design structures of moving bolster for body panel press and with design of railroad tracks, in which the bolster is moving in two mutually perpendicular directions. These moving bolsters are used for facilitating and speeding up the change of pressing dies, which is desirable in automated automotive industry for shortening and streamlining the pressing die change. The part of the work is research of the current state of knowledge in systems for quick die change, design of the moving bolster and its drive, design of railroad tracks, amount of design and control calculations, design of mechanism for lifting the bolster, optimization and strength calculations of bolster in ANSYS software. All the design structures of bolster, railroad tracks and basic workplace layout are processed in 3D software for modelling Autodesk Inventor. Attachments consist of drawing documentation of main assemblies, namely mounting drawing of moving bolster assembly, mounting drawing of railroad tracks assembly, drawing of workplace layout and furthermore drawing of driven shaft, weldment and workpiece of moving bolster and railroad tracks block.