This master’s thesis describes the design of the Baja SAE vehicle according to the applicable rules. In the beginning is the work focused on search competing vehicles and subsequently on design the first Baja SAE vehicle in the Czech republic. This thesis is systematically divided into chapters according process to the vehicle design. The main part of a master's thesis is design of axle kinematics in software Adams and frame design. The model was designed in Catia V5. The frame was analysed of torsional stiffness and stress in software ANSYS.

The master´s thesis is focused on chassis design of Formula Student car. It´s describes not only design of frame but also mounting of suspension components like arms, rockers and dampers. During whole design process was using finite elements method calculations, to achieve determined value of torsional stiffness and prevent local deformation of frame structure during drive. Value of torsional stiffness is also verificated by measurement and in last chapter is described influence of torsional stiffness on vehicle dynamics.

O objetivo deste trabalho é estudar a influência da rigidez do quadro na dirigibilidade de um veículo de competição fórmula SAE (protótipo E2-M, da equipe EESC-USP) em ambiente multicorpos com o software Adams/Car. Um modelo contendo os subsistemas de suspensão, direção, pneumático, powertrain, barra estabilizadora e quadro foi construído em ambiente multicorpos com componentes modelados como corpos rígidos. Posteriormente foram elaborados três modelos de quadros flexíveis com diferentes valores de rigidez torcional para substituir o quadro rígido. Estes foram obtidos através da análise modal com o auxílio do método dos elementos finitos. Para comparação da dinâmica lateral dos modelos, típicas manobras do estudo de dirigibilidade foram consideradas tais como rampsteer, step-steer e single lane change. Os resultados obtidos foram de aceleração lateral e velocidade de guinada. Pelas condições avaliadas, pode-se concluir que a rigidez torcional de um quadro para o protótipo E2-M pode estar entre 700 e 1500 N.m/o. Essa variação de rigidez representou 5 kg de massa no quadro. Porém deve-se fazer uma avaliação modal com a massa suspensa calibrada para verificar se não existe acoplamento de modos e freqüências com outros subsistemas. / This dissertation is intended to study the influence of frame stiffness in handling of a Formula SAE vehicle (E2-M prototype from EESC-USP Formula SAE team) in multibody with Adams/Car software. A model containing the subsystems of suspension, steering, tires, powertrain, frame and stabilizing bar was built considering rigid bodies. Subsequently, three models of flexible frames were developed with different values of torsional stiffness to replace the rigid frame. They were obtained through modal analysis with the aid of finite element method. For the handling investigation, maneuvers such as ramp-steer, step-steer and single lane change were considered. The results evaluated were lateral acceleration and yaw velocity. According to results, the torsional stiffness for the E2-M prototype can be between 700 and 1500 Nm/o. But an eigenvalue analyses is also necessary to verify if there is no coupling of modes of the calibrated sprung mass with other subsystems.

O objetivo deste trabalho é estudar a influência da rigidez do quadro na dirigibilidade de um veículo de competição fórmula SAE (protótipo E2-M, da equipe EESC-USP) em ambiente multicorpos com o software Adams/Car. Um modelo contendo os subsistemas de suspensão, direção, pneumático, powertrain, barra estabilizadora e quadro foi construído em ambiente multicorpos com componentes modelados como corpos rígidos. Posteriormente foram elaborados três modelos de quadros flexíveis com diferentes valores de rigidez torcional para substituir o quadro rígido. Estes foram obtidos através da análise modal com o auxílio do método dos elementos finitos. Para comparação da dinâmica lateral dos modelos, típicas manobras do estudo de dirigibilidade foram consideradas tais como rampsteer, step-steer e single lane change. Os resultados obtidos foram de aceleração lateral e velocidade de guinada. Pelas condições avaliadas, pode-se concluir que a rigidez torcional de um quadro para o protótipo E2-M pode estar entre 700 e 1500 N.m/o. Essa variação de rigidez representou 5 kg de massa no quadro. Porém deve-se fazer uma avaliação modal com a massa suspensa calibrada para verificar se não existe acoplamento de modos e freqüências com outros subsistemas. / This dissertation is intended to study the influence of frame stiffness in handling of a Formula SAE vehicle (E2-M prototype from EESC-USP Formula SAE team) in multibody with Adams/Car software. A model containing the subsystems of suspension, steering, tires, powertrain, frame and stabilizing bar was built considering rigid bodies. Subsequently, three models of flexible frames were developed with different values of torsional stiffness to replace the rigid frame. They were obtained through modal analysis with the aid of finite element method. For the handling investigation, maneuvers such as ramp-steer, step-steer and single lane change were considered. The results evaluated were lateral acceleration and yaw velocity. According to results, the torsional stiffness for the E2-M prototype can be between 700 and 1500 Nm/o. But an eigenvalue analyses is also necessary to verify if there is no coupling of modes of the calibrated sprung mass with other subsystems.

This master thesis describes design of frame construction of Formula Student car. The objective was to reduce weight and increase the torsional stiffness against to last version of the car. Next objective was to prove advantages of alternative frame. This had been achieved by gradual transformation of standard design of frame to alternative with the usage of FSAE alternative frame rules. The weight was reduced by 20% and torsional stiffness was increased by 34% thanks to FEM simulation and sophisticated changes of alternative frame design.