Spelling suggestions: "subject:"free carrier concentration"" "subject:"tree carrier concentration""
1 |
Optoelectronic and Structural Properties of Group III-Nitride Semiconductors Grown by High Pressure MOCVD and Migration Enhanced Plasma Assisted MOCVDMatara Kankanamge, Indika 15 December 2016 (has links)
The objective of this dissertation is to understand the structural and optoelectronic properties of group III-nitride materials grown by High-Pressure Metal Organic Chemical Vapor Deposition (HP-MOCVD) and Migration Enhanced Plasma Assisted MOCVD by FTIR reflectance spectroscopy, Raman spectroscopy, X-ray diffraction, and Atomic Force Microscopy.
The influence of the substrates/templates (Sapphire, AlN, Ga-polar GaN, N-polar GaN, n-GaN, and p-GaN) on the free carrier concentration, carrier mobility, short-range crystalline ordering, and surface morphology of the InN layers grown on HP-MOCVD were investigated using those techniques. The lowest carrier concentration of 7.1×1018 cm-3 with mobility of 660 cm2V-1s-1 was found in the InN film on AlN template, by FTIR reflectance spectra analysis. Furthermore, in addition to the bulk layer, an intermediate InN layers with different optoelectronic properties were identified in these samples. The best local crystalline order was observed in the InN/AlN/Sapphire by the Raman E2 high analysis. The smoothest InN surface was observed on the InN film on p-GaN template.
The influence of reactor pressures (2.5–18.5 bar) on the long-range crystalline order, in plane structural quality, local crystalline order, free carrier concentration, and carrier mobility of the InN epilayers deposited on GaN/sapphire by HP-MOCVD has also been studied using those methods. Within the studied process parameter space, the best material properties were achieved at a reactor pressure of 12.5 bar and a group-V/III ratio of 2500 with a free carrier concentration of 1.5x1018 cm-3, a mobility in the bulk InN layer of 270 cm2 V-1s-1 and the Raman (E2 high) FWHM of 10.3 cm-1. The crystalline properties, probed by XRD 2θ–ω scans have shown an improvement with the increasing reactor pressure.
The effect of an AlN buffer layer on the free carrier concentration, carrier mobility, local crystalline order, and surface morphology of InN layers grown by Migration-Enhanced Plasma Assisted MOCVD were also investigated. Here, the AlN nucleation layer was varied to assess the physical properties of the InN layers. This study was focused on optimization of the AlN nucleation layer (e.g. temporal precursor exposure, nitrogen plasma exposure, and plasma power) and its effect on the InN layer properties.
|
2 |
Improved Estimation of Epitaxial Thin Film Thickness and Doping Using Fourier Transform Infrared Reflection SpectroscopySunkari, Swapna Geetha 11 December 2004 (has links)
Film thickness, free carrier concentration and free carrier mobility are critical figures of merit for silicon carbide epitaxial growth. Room temperature Fourier Transform Infrared (FTIR) reflection spectroscopy can estimate these parameters non-destructively and is capable of high-resolution wafer mapping. Commercially available equipment has greatly simplified the application of this technique by coupling a high performance automated spectrometer with model-based data analysis and interpretation based on the personal computer. While powerful numerical techniques run fast and efficient on modern computers, it is essential that low-order, well-conditioned models are needed. The observed reflectance spectrum is the result of reflection and refraction of light at different interfaces due to constructive and destructive interference. The estimation of film thickness and free carrier concentration for single epitaxial layers has been improved by studying the Longitudinal Optical Phonon Plasmon (LPP) coupled modes. However, the addition of multiple layers introduces many degrees of freedom, which complicates parameter extraction. The multiple epitaxial layer stacks studied were intended for Metal Semiconductor Field Effect Transistor (MESFET?s) on both conducting and semi-insulating substrates. The thickness estimation of the n-channel in the MESFET stack on semi-insulating substrate is improved by preconditioning the curve fit for plasma frequency obtained from doping estimation from capacitance voltage profiling or by observing an LPP- peak.
|
Page generated in 0.1468 seconds