Spelling suggestions: "subject:"free piston stirling engine"" "subject:"free piston tirling engine""
1 |
Dynamic analysis of free piston Stirling enginesUlusoy, Necati January 1994 (has links)
No description available.
|
2 |
Design optimisation of a transverse flux linear oscillating generator for resonant free-piston Stirling applicationsJoubert, Louis Hoogenhout 03 1900 (has links)
Thesis (MSc)--Stellenbosch University, 2015. / ENGLISH ABSTRACT: The design optimisation of a linear oscillatory electric generator for application in freepiston
Stirling engines is described in this thesis.
A basic overview of free-piston Stirling engine technology is given by firstly providing a
brief description of the operation of the heat engine. The applications of free-piston Stirling
engines in industry are given and the proposed future applications are described.
Different types of electrical machine designs from industry and academia are evaluated
in a literature study. A classification structure is also proposed based on the magnetic flux
variation within the designs.
Based on the literature study, a transverse flux, single-phase, moving magnet, tubular
topology was chosen for investigation.
Athree dimensional finite element simulation was chosen as the most appropriatemethod
to model the linear electrical machine. A commercial simulation package was called from
a simulation script and the outputs from the finite element simulation were again used to
calculate the electrical machine performance parameters using the instantaneous voltageand
current values.
A sequential quadratic programming algorithm was used to perform optimisation of
the machine topologies, with the optimisation variables being dimensional parameters that
describe the machine geometry and the goal of the optimisation to minimise the active mass
of the machine, while maintaining preset minima for the output power and the efficiency.
The machine was optimised for a number of different translator configurations and the
different configurations were analysed and compared. It was found that a quasi-Halbach
arrangement of the permanent magnets yielded the lowest overall active mass. A comparative
study is also presented, where this quasi-Halbach variant is compared to a commercial
machine. It was found that the linear machine design with a quasi-Halbach arrangement
compares well with the commercial machine.
A prototype and test bed was designed and constructed. Due to manufacuring difficulties
however, the machine could not be completed in time for testing. / AFRIKAANSE OPSOMMING: Die ontwerpsoptimering van ’n lineêre ossillerende elektriese generator vir toepassing in
vrysuier Stirling enjins word beskryf in hierdie tesis.
’n Basiese oorsig van vrysuier Stirling enjin tegnologie word gegee deur eerstens ’n kort
beskrywing te gee van die werking van die hitte-enjin. Die aanwending van vrysuier Stirling
enjins in industrie word gegee en voorgestelde toekomstige toepassings word beskryf.
Verskillende tipes elektriese masjien ontwerpe vanuit die industrie en die akademie word
geëvalueer in ’n literatuurstudie. ’n Klassifiseringstruktuur, gebaseer op die magnetiese
vloedverandering in die ontwerpe, word ook voorgestel.
’n Transverse vloed, enkelfase, bewegende magneet, tubulêre topologie is gekies vir die
ondersoek, gebaseer op die onder andere die literatuurstudie.
’n Drie-dimensionele eindige element simulasie is gekies as die mees geskikte metode
om die lineêre elektriese masjien te modelleer. ’n Kommersiële simulasie pakket is deur
middel van ’n simulasie skrip geroep en die uitsette vanaf die eindige element simulasie is
weer gebruik om die werksverrigtingsparameters van die elektriese masjien te bereken deur
gebruik te maak van die oomblikswaardes van die spanning en stroom.
’n Sekwensiële kwadratiese programmering algoritme is gebruik om optimering van
die masjien topologieë te doen, met die dimensionele parameters wat die masjien geometrie
beskryf as die optimeringsveranderlikes en doel van die optimering om die aktiewe
massa van die masjien te minimeer, terwyl die uitsetdrywing en die benuttingsgraad by
voorafgestelde minima gehou word.
Die masjien is geoptimeer vir verskeie translator konfigurasies en die verskillende konfigurasies
is geanaliseer en vergelyk. Dit is bevind dat ’n kwasi-Halbach skikking van die
permanente magnete die laagste totale aktiewe massa gelewer het. ’n Vergelykende studie
is ook aangebied, waar die kwasi-Halbach variant vergelyk is met ’n kommersiële masjien.
Dit is bevind dat die lineêre masjien met die kwasi-Halbach skikking baie goed vergelyk
met die kommersiële masjien.
’n Prototiepe masjien en toetsopstelling is ontwerp en aan mekaar gesit. Maar as gevolg
van vervaardigbaarheids tekortkominge kon toetse op die prototiepe nie betyds gedoen
word nie.
|
3 |
Some mathematical models to describe the dynamic behavior of the B-10 free-piston stirling engineMartínez Saturno, José Gregorio January 1994 (has links)
No description available.
|
4 |
Parametric Analysis Of A Free Piston Stirling Engine For Spacecraft Power Applications With A Radioisotope Heat SourceBhaskaran, Ramprasad 09 1900 (has links) (PDF)
Stirling engines are promising candidates for applications where air breathing engines cannot be used. Self contained engines capable of operating independently of the environment are required to convert thermal energy into electric power, or to perform other necessary functions. These are ideally suited for power generation onboard spacecrafts with radioisotope heat source. These engines can power interplanetary missions to Mars and beyond.
The problem of parametric analysis, sensitivity and numerical optimization of Stirling cycle engine is discussed and applied to a specific example of a 2kWe free piston Stirling engine. Stirling cycle simulation programs are generated with emphasis and adaptations peculiar to free piston design for space use. Design algorithms are generated in MatLab and optimization toolbox is used for the parametric analysis adopted in this thesis.
A free piston beta Stirling engine with a linear alternator configuration has been studied for the interdependency and performance effects of various important operational parameters. The analysis has been carried out in order to optimize the primary parameters, weight vis a vis envelope (length and diameter) and stroke of the engine, to make it suitable for space use. The major cycle parameters considered are operating pressure, linear speed, dead space ratio and swept volume ratio, classified as secondary parameters. The whole analysis has been carried out at a cycle temperature ratio of 0.4 for a heat source temperature of 873 K, typical of a radioisotope heat source.
The optimization is carried out for the defined design requirements viz. envelope of 50 × 50 cm , stroke of less than 10 cm, and heat source temperature of 873 K. The process of parametric optimization of the primary parameters viz engine envelope and stroke are carried out with respect to the secondary parameters. Iterations are carried out on the design programs in MatLab. The results indicate that the three primary parameters have a different set each, of the secondary parameter values when optimized to the design requirement.
The fmincon solver of MatLab in the optimization tool box is selected in order to validate the optimization results. The solver is used to find a minimum of a constrained nonlinear multivariable function defining the primary parameters. The results obtained concur with the optimization results generated by the design algorithm. Further, the interdependency amongst the primary and secondary parameters is studied by generating MatLab plots for all possible combinations among the various parameters.
The effect of variations in the pressure and linear speed on the system envelope and stroke are more pronounced at lower range values of the pressure and speed and the variations of the primary parameter values are constant at higher ranges. The effect of dead space ratio and swept volume ratio (>1.0) is not pronounced.
The requirements in the environment of space place a number of constraints upon a Stirling engine/alternator design that are not present in terrestrial applications. High specific power is achieved by designing the engine for higher pressure and frequency operation than a terrestrial Stirling engine, and by using light weight materials where appropriate. Cylinder is the heart of the engine and it forms a major proportion of the total system mass. Mass and heat loss estimates and analysis have been carried out on the cylinder for various materials of construction. Based on the analysis feasibility exists for a Cu-Ni combination. The system would have a mass of 7kg with a specific power estimate of 0.28kW/kg and a conduction heat loss to mass ratio of 159W/kg.
The system obtained by numerical analysis is modeled in system simulation software SIMULATIONX. The simulation of the system is studied and a sensitivity analysis performed in order to assess the parametric interdependency of the whole free piston Stirling engine system. The system sensitivity to piston and displacer mass is studied using the simulation model.
Sensitivity results indicate that there is a range of mass values within which the system is operational, mass values outside the range makes the system non-functional. Also the range is a function of various parameters and detailed analysis is required in this direction in order to further optimize all the functional parameters. Engineering approximation is carried out using the curve fitting toolbox in MatLab to generate design equations in order to provide preliminary design data for the designer, further a scaling study is carried out at various power levels in order to assess the sensitivity of system geometry at various power levels.
|
Page generated in 0.0864 seconds