No description available.

Thesis (M.S.)--Ohio University, November, 1982. / Title from PDF t.p.

Memoire (M.Sc.A.) --Universite du Quebec a Chicoutimi, 1988. / En tete du titre : Memoire presente a l'Universite du Quebec a Chicoutimi comme exigence partielle de la maitrise en ressources et systemes. CaQCU Document électronique également accessible en format PDF. CaQCU

No description available.

No description available.

No description available.

A dissertation submitted to the Faculty of Engineering, University of the Witwatersrand, Johannesburg, in fulfilment of the requirements for the degree of Master in Science in Engineering, Johannesburg September 1998 / Combustion modelling of utility furnace chambers provides a cost efficient means to extrapolate the combustion behaviour of pulverised fuel (pf) as determined from drop tube furnace (DTF) experiments to full scale plant by making use of computational fluid dynamics (CFD). The combustion model will be used to assimilate essential information for the evaluation and prediction of the effect of • changing coal feedstocks • proposed operational changes • boiler modifications. TRI comrnlssloned a DTF in 1989 which has to date been primarily used for the comparative characterisation of coals in terms of combustion behaviour. An analysis of the DTF results allows the determination of certain combustion parameters used to define a mathematical model describing the rate at which the combustion reaction takes place. This model has been incorporated into a reactor model which can simulate the processes occurring in the furnace region of a boiler, thereby allowing the extrapolation of the DTF determined combustion assessment to the full scale. This provides information about combustion conditions in the boiler which in turn are used in the evaluation of the furnace performance. Extensive furnace testwork of one of Eskom's wall fired plant (Hendrina Unit 9) during 1996, intended to validate the model for the ar plications outlined above, included the measurement {If : • gas temperatures • O2, C02, CO, NOx and S02 concentrations • residence time distributions • combustible matter in combustion residues extracted from the furnace • furnace heat fluxes. The coal used during the tests was sampled and subjected to a series of chemical and other lab-scale analyses to determine the following: • physical properties • composition • devolatilisation properties " combustion properties The same furnace was modelled using the University of Stuttgart's AIOLOS combustion code, the results of Which are compared with the measured data. A DTF derived combustion assessment of a coal sampled from the same site but from a different part of the beneficiation plant, which was found to burn differently, was subsequently used in a further simulation to assess the sensitivity of the model to char combustion rate data. The results of these predictions are compared to the predictions of the validation simulation. It was found that the model produces results that compare well with the measured data. Furthermore. the model was found to be sufficiently sensitive to reactivity parameters of the coal. The model has thereby demonstrated that it can be used in the envisaged application of extrapolating DTF reactivity assessments to full scale plant. In using the model, it has become apparent that the evaluations of furnace modifications and assessments of boiler operation lie well within the capabilities of the model. / MT2017

No description available.

Mémoire (M. Sc. A.) --Université du Québec à Chicoutimi, 1988. / Bibliogr. : f. 104-105. Document électronique également accessible en format PDF. CaQCU