Capacitive deionization based on electrosorption has become a viable process for brackish water desalination. In this study, activated biochar was employed as low-cost and alternative carbon-based electrodes substituting activated carbon with comparable adsorption capacity. Effects of different activation temperatures of the biochar were studied by physical characterization (i.e. SEM, TEM, elemental analysis, and Raman spectroscopy) and electrochemical characterization (i.e. cyclic voltammetry and galvanostatic charge/discharge measurement) based on the electrical double layer theory. The highest specific capacitance obtained (118.50 F g-1) was from activated biochar electrode treated at 800°C. The removal capacity was investigated by AAS and conductivity measurements. Several limitations associated with them were identified to improve the measurements. The removal capacity of biochar electrode is ~ 2 mg g-1 with significant results for both one-sided and two-sided t-test. In summary, activated biochar can be used as a cheap-alternative electrode material for desalination based on capacitive deionization.

<p>In this research project, nanostructured composites based on Tin dioxide (SnO2) and Titanium dioxide (TiO2) with poly-4-styrene sulfonic acid (PSSA) doped polyaniline (PANI) conducting polymer has been investigated based on their structural, electrical and electrochemical properties. The synthesis of conducting polymers and their metal oxide or composites have been carried out chemically or electrochemically according to methods modified from the literature. Layer-by-layer construction of nano-Metal Oxide/PSSA doped polyaniline composites were successfully constructed by electroanalytical methods on the surface of a glassy carbon working electrode (GCE).</p>

<p>In this research project, nanostructured composites based on Tin dioxide (SnO2) and Titanium dioxide (TiO2) with poly-4-styrene sulfonic acid (PSSA) doped polyaniline (PANI) conducting polymer has been investigated based on their structural, electrical and electrochemical properties. The synthesis of conducting polymers and their metal oxide or composites have been carried out chemically or electrochemically according to methods modified from the literature. Layer-by-layer construction of nano-Metal Oxide/PSSA doped polyaniline composites were successfully constructed by electroanalytical methods on the surface of a glassy carbon working electrode (GCE).</p>

Magister Scientiae - MSc / In this research project, nanostructured composites based on Tin dioxide (SnO2) and Titanium dioxide (TiO2) with poly-4-styrene sulfonic acid (PSSA) doped polyaniline (PANI) conducting polymer has been investigated based on their structural, electrical and electrochemical properties. The synthesis of conducting polymers and their metal oxide or composites have been carried out chemically or electrochemically according to methods modified from the literature. Layer-by-layer construction of nano-Metal Oxide/PSSA doped polyaniline composites were successfully constructed by electroanalytical methods on the surface of a glassy carbon working electrode (GCE). / South Africa

Philosophiae Doctor - PhD (Chemistry) / Supercapacitors, also known as ultracapacitors or electrochemical capacitors, are considered one of the most important subjects concerning electricity or energy storage which has proven to be problematic for South Africa. In this work, graphene oxide (GO) was supported with platinum, silver and copper nanoparticles anchored with dodecylbenzenesulphonic acid (DBSA) doped polyaniline (PANI) to form nanocomposites. Their properties were investigated with different characterization techniques. The high resolution transmission electron microscopy (HRTEM) revealed GO's nanosheets to be light, flat, transparent and appeared to be larger than 1.5 ?m in thickness. This was also confirmed by high resolution scanning electron microscopy (HRSEM) with smooth surfaces and wrinkled edges observed with the energy dispersive X-ray analysis (EDX) confirming the presence of the functional groups such as carbon and oxygen. The HRTEM analysis of decorated GO with platinum, silver and copper nanoparticles (NPs) revealed small and uniformly dispersed NPs on the surface of GO with mean particle sizes of 2.3 ± 0.2 nm, 2.6 ± 0.3 nm and 3.5 ± 0.5 nm respectively and the surface of GO showed increasing roughness as observed in HRSEM micrographs. The X-ray fluorescence microscopy (XRF) and EDX confirmed the presence of the nanoparticles on the surface of GO as platinum, silver and copper which appeared in abundance in each spectra. Anchoring the GO with DBSA doped PANI revealed that single GO sheets were embedded into the polymer latex, which caused the DBSA-PANI particles to become adsorbed on their surfaces. This process then appeared as dark regions in the HRTEM images. Morphological studies by HRSEM also supported that single GO sheets were embedded into the polymer latex as composite formation appeared aggregated and as bounded particles with smooth and toothed edges.

Magister Scientiae - MSc (Chemistry) / Blending polymers together offers researchers the ability to create novel materials that have a combination of desired properties of the individual polymers for a variety of functions as well as improving specific properties. The behaviour of the resulting blended polymer or blend is determined by the interactions between the two polymers. The resultant synergy from blending an intrinsically conducting polymer like polyaniline (PANI), is that it possesses the electrical, electronic, magnetic and optical properties of a metal while retaining the poor mechanical properties, solubility and processibility commonly associated with a conventional polymer. Aromatic polyamic acid has outstanding thermal, mechanical, electrical, and solvent resistance properties that can overcome the poor mechanical properties and instability of the conventional conducting polymers, such as polyaniline.