Spelling suggestions: "subject:"sas bubble"" "subject:"suas bubble""
1 |
A study of the processes involved during nanometer scale electron beam irradiation of calcium fluorideZanetti, Richard January 1994 (has links)
No description available.
|
2 |
Experiments on two-phase flow in a vertical tube with a moveable obstaclePrasser, H.-M., Beyer, M., Carl, H., Al Issa, S., Schütz, P., Pietruske, H. 31 March 2010 (has links) (PDF)
A novel technique to study the two-phase flow field around an asymmetric diaphragm in a vertical pipe is presented, that enables producing data for CFD code validation in complex geometries. Main feature is a translocation of the diaphragm to scan the 3D void field with a stationary wire-mesh sensor. Besides the measurement of time-averaged void fraction fields, a novel data evaluation method was developed to extract estimated liquid velocity profiles from the wire-mesh sensor data. The flow around an obstacle of the chosen geometry has many topological similarities with complex flow situations in bends, T-junctions, valves, safety valves and other components of power plant equipment and flow phenomena like curved stream lines, which form significant angles with the gravity vector, flow separation at sharp edges and recirculation zones in their wake are present. In order to assess the quality of the CFD code and their underlying multiphase flow and turbulence models pre-test calculations by ANSYS CFX 10.0 were carried out. A comparison between the calculation results and the experimental data shows a good agreement in term of all significant qualitative details of the void fraction and liquid velocity distributions. Furthermore, the report contains a method to assess the lateral components of bubble velocities in the form of a basic theoretical description and visualisation examples. The plots show the deviation of the flow around the obstacle in term of vectors represented the average velocities of the instantaneous cross-sections of all bubbles in the time interval when they pass the measuring plane. A detailed uncertainty analyse of the velocity assessments concludes the presented report. It includes remarks about the comparison with a second method for calculating bubble velocity profiles - the cross-correlation. In addition, this chapter gives an overview about the influence of acceleration and deceleration effects on the velocity estimation.
|
3 |
Experiments on upwards gas/liquid flow in vertical pipesSchütz, H., Pietruske, P., Manera, A., Carl, H., Beyer, M., Prasser, H.-M. 31 March 2010 (has links) (PDF)
Two-phase flow experiments at vertical pipes are much suitable for studying the action of different constitutive relations characterizing the momentum exchange at the gas/liquid interface as well as the dynamic behaviour of the gas/liquid interface itself. The flow can be observed in its movement along the pipe and, in particular, within the shear field close to the pipe wall over a considerable vertical distance and, consequently, over a comparatively long time without the immediate separation of gas and liquid characteristic for horizontal flows. Wire-mesh sensors, which were the working horse in the described experiments, supplied sequences of instantaneous two-dimensional gas fraction distributions with a high-resolution in space and time. This allows to derive from the data not only void fraction and bubble velocity profiles, but also bubble size distributions, bubble-size resolved radial gas fraction profiles as well as the axial evolution of these distributions. An interfacial surface reconstruction algorithm was developed in order to extract the extension of interfacial area from the wire-mesh sensor data. The sensors were upgraded to withstand parameters that are close to nuclear reactor conditions. Most of the experiments were performed for both air/water flow at ambient pressure and steam/water flow of up to 6.5 MPa at identical combinations of the gas and liquid superficial velocities. This offers excellent conditions for studying the influence of the fluid properties.
|
4 |
Low-frequency acoustic classification of methane hydratesGreene, Chad Allen 16 February 2011 (has links)
Methane hydrates are naturally-occurring ice-like substances found in permafrost and in ocean sediments along continental shelves. These compounds are often the source of cold seeps—plumes which vent methane into aquatic environments, and may subsequently release the potent greenhouse gas into the atmosphere. Methane hydrates and methane gas seeps are of particular interest both for their potential as an energy source and for their possible contribution to climate change. In an effort to improve location of hydrates through the use of seismic surveys and echo-sounding technology, this work aims to describe the low-frequency (10 Hz to 10 kHz) acoustic behavior of methane gas bubbles and methane hydrates in water under simulated ocean-floor conditions of low temperatures and high pressures. Products of the experiments and analysis presented in this thesis include (a) passive acoustic techniques for measurement of gas flux from underwater seeps, (b) a modified form of Wood's model of low-frequency sound propagation through a bubbly liquid containing real gas, and (c) low-frequency measurements of bulk moduli and dissociation pressures of four natural samples of methane hydrates. Experimental procedures and results are presented, along with analytical and numerical models which support the findings. / text
|
5 |
Experiments on two-phase flow in a vertical tube with a moveable obstaclePrasser, H.-M., Beyer, M., Carl, H., Al Issa, S., Schütz, P., Pietruske, H. January 2007 (has links)
A novel technique to study the two-phase flow field around an asymmetric diaphragm in a vertical pipe is presented, that enables producing data for CFD code validation in complex geometries. Main feature is a translocation of the diaphragm to scan the 3D void field with a stationary wire-mesh sensor. Besides the measurement of time-averaged void fraction fields, a novel data evaluation method was developed to extract estimated liquid velocity profiles from the wire-mesh sensor data. The flow around an obstacle of the chosen geometry has many topological similarities with complex flow situations in bends, T-junctions, valves, safety valves and other components of power plant equipment and flow phenomena like curved stream lines, which form significant angles with the gravity vector, flow separation at sharp edges and recirculation zones in their wake are present. In order to assess the quality of the CFD code and their underlying multiphase flow and turbulence models pre-test calculations by ANSYS CFX 10.0 were carried out. A comparison between the calculation results and the experimental data shows a good agreement in term of all significant qualitative details of the void fraction and liquid velocity distributions. Furthermore, the report contains a method to assess the lateral components of bubble velocities in the form of a basic theoretical description and visualisation examples. The plots show the deviation of the flow around the obstacle in term of vectors represented the average velocities of the instantaneous cross-sections of all bubbles in the time interval when they pass the measuring plane. A detailed uncertainty analyse of the velocity assessments concludes the presented report. It includes remarks about the comparison with a second method for calculating bubble velocity profiles - the cross-correlation. In addition, this chapter gives an overview about the influence of acceleration and deceleration effects on the velocity estimation.
|
6 |
Experiments on upwards gas/liquid flow in vertical pipesSchütz, H., Pietruske, P., Manera, A., Carl, H., Beyer, M., Prasser, H.-M. January 2007 (has links)
Two-phase flow experiments at vertical pipes are much suitable for studying the action of different constitutive relations characterizing the momentum exchange at the gas/liquid interface as well as the dynamic behaviour of the gas/liquid interface itself. The flow can be observed in its movement along the pipe and, in particular, within the shear field close to the pipe wall over a considerable vertical distance and, consequently, over a comparatively long time without the immediate separation of gas and liquid characteristic for horizontal flows. Wire-mesh sensors, which were the working horse in the described experiments, supplied sequences of instantaneous two-dimensional gas fraction distributions with a high-resolution in space and time. This allows to derive from the data not only void fraction and bubble velocity profiles, but also bubble size distributions, bubble-size resolved radial gas fraction profiles as well as the axial evolution of these distributions. An interfacial surface reconstruction algorithm was developed in order to extract the extension of interfacial area from the wire-mesh sensor data. The sensors were upgraded to withstand parameters that are close to nuclear reactor conditions. Most of the experiments were performed for both air/water flow at ambient pressure and steam/water flow of up to 6.5 MPa at identical combinations of the gas and liquid superficial velocities. This offers excellent conditions for studying the influence of the fluid properties.
|
7 |
Air-water experiments in a vertical DN200-pipeBeyer, M., Lucas, D., Kussin, J., Schütz, P. 07 September 2011 (has links) (PDF)
The extensive experimental results presented in this report provide a high-quality database for air-/water flows in a vertical pipe with a nominal diameter of 200 mm. This database can be used for the development and validation of CFD-like models for two-phase flows, e.g. for bubble coalescence and fragmentation. In particular, the investigations aim on the evolution of the two-phase flow along the pipe height. Therefore, up to 18 single measurements with varying distances between the gas injection and measurement plane were realised for each of the 92 combinations of gas and water flow rates. The pressure at the position of the activated gas injection was kept constant at 0.25 MPa(a). This boundary condition has the advantage that the measured data represent exactly the evolution of the flow along the pipe, i.e. they reflect a configuration at which the gas injection is at a fixed height position, while the measurement plane varies. Important results of this test series are time averaged radial profiles of the gas fraction, and the gas velocity, as well as the time and cross-section averaged bubble size distributions. Furthermore, gas fraction data resolved regarding the bubble size and spatial distribution are presented. As in previous test series, flow patterns were analysed, whereby the classification results from the bubble size. A substantial part of these new air/water experiments were quality and plausibility checks of the measured data. In the result, a clear and consistent trend regarding their evolution with increasing distance from the position of the gas injection was found. Comparisons of the trend of time and cross section averaged gas volume fraction along the pipe height with the theoretically expected values were carried out. The influence of the orifice diameter of the gas injection on flow patterns is also discussed in the report.
|
8 |
Luft-Wasser Experimente im vertikalen DN200-RohrBeyer, M., Lucas, D., Kussin, J., Schütz, P. 07 September 2011 (has links) (PDF)
Die im Rahmen dieser Versuchsserie erzielten umfangreichen experimentellen Ergebnisse bilden eine hochwertige Datenbasis für Luft-Wasser-Strömungen in einem vertikalen DN200-Rohr, die für die Entwicklung und Validierung von CFD-Modellen, beispielweise bzgl. Blasenkoaleszenz und -fragmentierung, genutzt werden können. Besonderes interessant ist die Untersuchung der Entwicklung der Zweiphasenströmung über der Rohrhöhe. Aus diesem Grund wurden für jede der 92 betrachteten Kombinationen aus Gas- und Wasser-Volumenstromdichten bis zu 18 Messungen mit variablen Abständen zwischen Gaseinspeisung und Messebene durchgeführt. Dabei wurde der Druck an der Gaseinspeisestelle konstant auf 0,25 MPa(a) gehalten. Diese Randbedingung bietet den Vorteil, dass die so gemessenen Daten die Entwicklung der Strömung über der Rohrhöhe widerspiegeln, d.h. eine Konfiguration beschreiben, bei der das Gas an einer festen Höhenposition eingespeist wird und die Messungen in verschiedenen darüberliegenden Ebenen erfolgen. Wesentliche Ergebnisse dieser Messserie sind radiale zeitgemittelte Profile für den Gasgehalt und die Gasgeschwindigkeit sowie zeit- und querschnittsgemittelte Blasengrößenverteilungen. Außerdem liegen blasengrößen- und ortsaufgelöste Gasgehaltsdaten vor. Wie bereits bei früheren Versuchsserien wurden auch in diesem Fall die Strömungsformen analysiert, wobei die Klassifizierung anhand der Blasengröße erfolgte. Ein wesentlicher Bestandteil dieser neuen Luft/Wasser-Versuche war die Qualitäts- und Plausibilitätsprüfung der Messdaten. Es konnte festgestellt werden, dass die Daten einen eindeutigen, widerspruchsfreien Trend bzgl. ihrer Entwicklung mit zunehmendem Abstand von der Gaseinspeisung aufweisen. Zur Plausibilitätsprüfung wurden Vergleiche des Gasgehaltsverlaufes über der Rohrhöhe mit theoretisch zu erwartenden Kurven durchgeführt. Zusätzlich zu diesen Ergebnissen enthält der Bericht eine Einschätzung des Einflusses des Bohrungsdurchmessers an der Gaseinspeisung auf die sich einstellende Strömung.
|
9 |
Microbial Activity in Sediments: Effects on Soil BehaviorRebata-Landa, Veronica 23 August 2007 (has links)
Microorganisms have played a critical role in geological processes and in the formation of soils throughout geological time. It is hypothesized that biological activity can also affect soil properties in short engineering time-scales. Bioactivity in sediments is determined by the classical limiting factors (i.e., nutrients, water, C for biomass, temperature and pH) as well as by pore-size geometrical limits and mechanical interactions between bacterial cells and soil particles. These constraints restrict the range of grain size and burial depth where biomediated geochemical processes can be expected in sediments, affect the interpretation of geological processes and the development of engineering solutions such as bioremediation. When biological, geometrical and mechanical limiting factors are satisfied, bioactivity can be designed to alter the mechanical properties of a soil mass, including lowering the bulk stiffness of the pore fluid through controlled gas bio-generation, increasing the shear stiffness of the soil skeleton by biomineralization, and reducing hydraulic conduction through biofilm formation and clogging. Each of these processes can be analyzed to capture the bio-chemo-hydro-mechanical coupling effects, in order to identify the governing equations that can be used for process design. Design must recognize the implications of spatial variability, reversibility and environmental impacts.
|
10 |
Strömungskarten und Modelle für transiente ZweiphasenströmungenZschau, Jochen, Zippe, Winfried, Zippe, Cornelius, Prasser, Horst-Michael, Lucas, Dirk, Rohde, Ulrich, Böttger, Arnd, Schütz, Peter, Krepper, Eckhard, Weiß, Frank-Peter, Baldauf, Dieter 31 March 2010 (has links) (PDF)
Experimente mit neuartigen Messverfahren lieferten Daten über die Struktur von transienten Flüssig-keits-Gas-Strömungen für die Entwicklung und Validierung von mikroskopischen, d.h. geometrieunabhängigen Konstitutivbeziehungen zur Beschreibung des Impulsaustauschs zwischen Flüssig-phase und Gasblasen sowie zur Quantifizierung der Häufigkeit von Blasenkoaleszenz und -zerfall. Hierzu wurde eine vertikale Testsektion der Zweiphasentestschleife MTLoop in Rossendorf genutzt, wobei erstmals Gittersensoren mit einer Auflösung von 2-3 mm bei einer Messfrequenz von bis zu 10 kHz angewandt wurden. Dabei wurde die Evolution von Gasgehalts-, Geschwindigkeits- und Bla-sengrößenverteilungen entlang des Strömungsweges und bei schnellen Übergangsprozessen aufge-nommen und so die für die Modellbildung erforderlichen Daten bereitgestellt. Für den Test der Mo-dellbeziehungen wurde ein vereinfachtes Verfahren zur Lösung der Strömungsgleichungen entlang des Strömungswegs erstellt. Es basiert auf der Betrachtung einer größeren Anzahl von Blasengrö-ßenklassen. Die erhaltenen numerische Lösungen haben erstmals gezeigt, dass der bei Erhöhung der Gasvolumenstromdichte stattfindende Übergang von einer Blasenströmung mit Randmaximum zu einem Profil mit Zentrumsmaximum und anschließend zu einer Pfropfenströmung ausgehend von einem einheitlichen Satz physikalisch begründeter und geometrieunabhängiger Konstitutivgleichun-gen modelliert werden kann. Die Modellbeziehungen haben sich in einem abgegrenzten Gebiet der Volumenstromdichten als generalisierungsfähig erwiesen und sind für den Einbau in CFD-Modelle geeignet. Weiterhin wurden Arbeiten zur Kondensation durchgeführt, die direkten Bezug zu den Kon-densationsmodellen haben, die in Thermohydraulik-Codes enthalten sind. Die Untersuchung liefert darüber hinaus experimentelle Daten für die Modellvalidierung hinsichtlich des Verhaltens und des Einflusses nichtkondensierbarer Gase. Hierfür wurden spezielle Sonden für die Bestimmung der Konzentration und für die Lokalisierung von Pfropfen nichtkondensierbarer Gase entwickelt und bei transienten Kondensationsversuchen in einem leicht geneigten Wärmeübertragerrohr eingesetzt.
|
Page generated in 0.0535 seconds