Spelling suggestions: "subject:"gasoline)"" "subject:"gasolines)""
91 |
Investigations of advanced injection and combustion strategies on DI diesel engine performance and emissionsMobasheri, Raouf January 2012 (has links)
The main driving force behind this research was the need for cleaner and more efficient engines to meet the ever-increasing demands on the modern automobile's emissions. In recent years different studies have been carried out to analyze the combined effects of high-pressure injection, boost pressure, multiple injections, included spray angle and combustion chamber geometry. Though considerable research has shown these technologies can meet the low emission regulations, the careful optimization of the engine operating conditions is still required in order to get the full benefit of the different strategies. With these issues as motivation, the first important objective of this study was to gain a detailed understanding of the mechanisms through which fuel injection interacts with other engine parameters and influences diesel combustion and emissions, and hence to attempt to generalize the adoption of multiple injection strategies with regards to improving diesel engine performance. For this purpose, a modified parameter called “Homogeneity Factor of in-cylinder charge” (HF) was introduced and proposed as a new measure in combustion theory to analyze the combustion characteristics and air-fuel mixing process of diesel engines in more detail. The second part of this research builds upon a detail investigation on the included spray cone angle concept and explores further their use in conjunction with multiple-injection strategies in diesel engines. In addition, an investigation was performed in third phase of this research to analyze the effects of piston geometry on combustion, performance and exhaust emission characteristics. The results showed that employing a post-injection combined with a pilot injection results in reduced soot formation from diffusion combustion and enhances the soot oxidation process during the expansion stroke, resulting in decreased soot emissions, while the NOx concentration is maintained in low levels. It was also found that spray targeting is very effective for controlling the in-cylinder mixture distributions especially when it accompanied with advanced injection strategies. Moreover, the results confirmed that a narrower width of piston bowl has a higher unburned fuel air mixture region and hence results in higher soot emissions but with slightly larger piston surface area the optimum operating point could be obtained.
|
92 |
Transient modelling of a diesel engine and air-path controlCheng, Li January 2015 (has links)
Due to the inherent nonlinearity of the diesel engine, real-time control of the variable geometry turbocharger (VGT) and exhaust gas recirculation (EGR) valve still remains a challenging task. A controller has to be capable of coping with the transient operating condition of the engine, the interactions between the VGT and EGR, and also the trade-off effect in this control problem. In this work, novel real-time fuzzy logic controllers (RFLC) were developed and tested. Firstly, the proposed controllers were calibrated and validated in a transient diesel engine model which was developed and validated against the Caterpillar 3126B engine test bed located at the University of Sussex. The controllers were then further tested on the engine test bed. Compared to conventional controllers, the proposed controllers can effectively reduce engine emissions as well as fuel consumption. Experimental results show that compared to the baseline engine running on the Nonroad Transient Cycle (NRTC), mean values of the exhaust gas opacity and the nitrogen oxides (NOx) emission production were reduced by 36.8% and 33%, respectively. Instant specific fuel consumption of the RFLC engine was also reduced by up to 50% compared to the baseline engine during the test. Moreover, the proposed fuzzy logic controllers can also reduce development time and cost by avoiding extensive engine mapping of inlet air pressure and flow. When on-line emission measurements were not available, on-board emission predictors were developed and tested to supply the proposed fuzzy logic controller with predictions of soot and NOx production. Alternatively, adaptive neuro fuzzy inference system (ANFIS) controllers, which can learn from fuzzy logic controllers, were developed and tested. In the end, the proposed fuzzy logic controllers were compared with PI controllers using the transient engine model.
|
93 |
Air-fuel homogeneity effects on direct injection diesel engine performance emissionDimitriou, Pavlos January 2015 (has links)
The temporal and spatial distribution of fuel in cylinders is a key factor affecting the combustion characteristics and emission generation of a DI diesel engine. The airfuel mixing quality is critical for controlling ignition timing and combustion duration. Avoiding fuel-rich areas within the cylinder can significantly reduce soot formation as well as high local temperatures resulting in low NOx formation. The present investigation is focused on the effects of advanced fuel injections and air path strategies as well as the effects of piston geometry and fuel spray angle on air-fuel homogeneity, combustion process and their impacts on the performance and emission of the engine. A Ricardo Hydra single-cylinder engine in combination with AVL Fire CFD software was used in this investigation. An experimental analysis was conducted to assess the combustion characteristics and emissions formation of the engine under various injection strategies such as different injection timing, quantity, ratio, dwell angles between injections with various exhaust valve opening times and exhaust back pressures. A quan- titative factor named Homogeneity Factor (HF) was employed in the CFD code in order to quantify the air-fuel mixing and understand how the air-fuel homogeneity within the cylinder can influence the combustion and emissions of the engine. The investigation concludes that multiple injection strategies have the potential to reduce diesel emissions while maintaining meaningful fuel economy. Split injection can be used to improve the air-fuel mixture locally and control temperature generation during the start of combustion. Increased air-fuel homogeneity results in fewer fuel-rich areas within the cylinder and contributes to the reduction of soot emission. Extending the pre-mixed combustion phase has a direct effect on the reduction of soot formation while NOx generation is highly dependent on the scale of the primary fuel injection event.
|
94 |
Numerical investigation and evaluation of applying PPCI combustion in a HSDI diesel engineLiu, Bin January 2014 (has links)
In this study, the Partially Premixed Compression Ignition (PPCI) combustion strategy in the high-speed, direct-injection diesel engine was investigated numerically by KIVA-3V code coupled with detailed chemistry, aiming to find the solution to meet the increasingly stringent emission regulations. Using split-injection, the parameters including injection timing, split-proportion, spray angle and injection pressures have been studied for their effects on combustion performance and emissions. The effects of swirl ratio, EGR rate and boost pressure are evaluated for improving the mixing and combustion of PPCI. The Homogeneity Factor (HF) was proposed for evaluating the quality of mixing and for quantitatively investigating the effects of injection parameters and in-cylinder air motion on mixture formation. Relationships between the quality of mixing and combustion performance and emissions were discussed using this factor. The results showed that HF had well revealed overall quality of mixture and the effects of operating parameters explicitly. Different EGR compositions with varied fractions of CO2 or H2O were applied in PPCI combustion in order to evaluate the effects of EGR constituents on the combustion performance and emissions. Moreover, the parametric study was conducted under a sweep of the 2nd injection timing and EGR rate, for the understanding of the effects of CO2 and water vapour in EGR at different operating modes. The speed range and load range for the PPCI diesel combustion using split injection was investigated. The results showed that the high level of EGR rate limited the implementation of PPCI combustion at high engine load, while the engine speed was limited by increased CO emissions. The application of high level cooled EGR had the potential for extending operating limits. The proposed Premixed Rate (PR) has revealed the correlations between the degree of premixed combustion and ignition delay, together with overall equivalence ratio. Good responses in fuel consumption have been shown with increase PR. And the significant reduce in PR indicated low degree of premixed at high engine load.
|
95 |
Reconstruction of gasoline engine in-cylinder pressures using recurrent neural networksBennett, Colin January 2014 (has links)
Knowledge of the pressure inside the combustion chamber of a gasoline engine would provide very useful information regarding the quality and consistency of combustion and allow significant improvements in its control, leading to improved efficiency and refinement. While measurement using incylinder pressure transducers is common in laboratory tests, their use in production engines is very limited due to cost and durability constraints. This thesis seeks to exploit the time series prediction capabilities of recurrent neural networks in order to build an inverse model accepting crankshaft kinematics or cylinder block vibrations as inputs for the reconstruction of in-cylinder pressures. Success in this endeavour would provide information to drive a real time combustion control strategy using only sensors already commonly installed on production engines. A reference data set was acquired from a prototype Ford in-line 3 cylinder direct injected, spark ignited gasoline engine of 1.125 litre swept volume. Data acquired concentrated on low speed (1000-2000 rev/min), low load (10-30 Nm brake torque) test conditions. The experimental work undertaken is described in detail, along with the signal processing requirements to treat the data prior to presentation to a neural network. The primary problem then addressed is the reliable, efficient training of a recurrent neural network to result in an inverse model capable of predicting cylinder pressures from data not seen during the training phase, this unseen data includes examples from speed and load ranges other than those in the training case. The specific recurrent network architecture investigated is the non-linear autoregressive with exogenous inputs (NARX) structure. Teacher forced training is investigated using the reference engine data set before a state of the art recurrent training method (Robust Adaptive Gradient Descent – RAGD) is implemented and the influence of the various parameters surrounding input vectors, network structure and training algorithm are investigated. Optimum parameters for data, structure and training algorithm are identified.
|
96 |
Análise da impedância acústica na gasolina / Acoustic impedance analysis of gasolineKarina Zoboli Buttarello 03 October 2003 (has links)
Este trabalho analisa a qualidade dos combustíveis derivados de petróleo através de suas propriedades acústicas, visando assim um monitoramento contínuo e instantâneo. Analisa a variação da impedância acústica da gasolina com acréscimo de vários componentes como: tolueno, óleo diesel, querosene e álcool anidro. Os resultados obtidos mostram uma variação significativa embora não linear da impedância acústica nos combustíveis derivados de petróleo com acréscimo de tais substâncias. / This work is related with research project focused on the development of low cost and robust quality monitoring equipment and methods, suitable for application in the production of petrochemical compounds. The main objective of this work is to assess the quality of automotive gasoline through the analysis of its acoustic properties. More specifically, pure gasoline\'s acoustic impedance (defined as the product between its density and the velocity of propagation of an acoustic wave) is analyzed with respect to the addition of toluene, kerosene, ethanol and diesel fuel. Results show that the acoustic impedance is sensitive to the addition of such components, although this relation may be non-linear in some cases.
|
97 |
Análise da impedância acústica na gasolina / Acoustic impedance analysis of gasolineButtarello, Karina Zoboli 03 October 2003 (has links)
Este trabalho analisa a qualidade dos combustíveis derivados de petróleo através de suas propriedades acústicas, visando assim um monitoramento contínuo e instantâneo. Analisa a variação da impedância acústica da gasolina com acréscimo de vários componentes como: tolueno, óleo diesel, querosene e álcool anidro. Os resultados obtidos mostram uma variação significativa embora não linear da impedância acústica nos combustíveis derivados de petróleo com acréscimo de tais substâncias. / This work is related with research project focused on the development of low cost and robust quality monitoring equipment and methods, suitable for application in the production of petrochemical compounds. The main objective of this work is to assess the quality of automotive gasoline through the analysis of its acoustic properties. More specifically, pure gasoline\'s acoustic impedance (defined as the product between its density and the velocity of propagation of an acoustic wave) is analyzed with respect to the addition of toluene, kerosene, ethanol and diesel fuel. Results show that the acoustic impedance is sensitive to the addition of such components, although this relation may be non-linear in some cases.
|
98 |
ETBE as an additive in gasoline: advantages and disadvantagesYuan, Hong January 2006 (has links)
<p>The most widely used gasoline additive methyl tert-butyl ether (MTBE) has been questioned recently, since frequent detection of this compound in groundwater indicates that it could be a risk to our environment. Consequently, legislative efforts have been made by some local governments to phase out the use of MTBE. Among a number of alternative substitutes, ethyl tert-butyl (ETBE) seems to be the more promised one due to its lower water solubility, suggesting that it could pose less impact to our water supply. However, a thorough understanding of its environmental fate is needed before ETBE is widely accepted as a more environmentally friendly gasoline additive. As a part of this effort, the degradation of MTBE and ETBE as well as their effects on the fate of aromatic gasoline components, i.e. BTEX (benzene, toluene, ethyl-benzene and xylenes) were studied on two soils contaminated with MTBE-blended or ETBE-blended gasoline. During a period of 5 months, the general aerobic degradation of the gasoline and its different additives were monitored by gas chromatography – thermal conductivity detection (GC-TCD) and concentration changes of MTBE and ETBE were monitored with the help of gas chromatography - mass spectrometry (GC-MS). The results of this study showed that the degradation of MTBE, ETBE and BTEX occurred in all the systems, nevertheless MTBE and ETBE degraded far more slowly in contrast with the degradation of BTEX, indicating that MTBE and ETBE are more persistent. When the degradation of MTBE and ETBE were compared, ETBE decreased a little faster than MTBE, implying that ETBE advantages slightly in degradation over MTBE. Concerning the effects of MTBE and ETBE on the fate of BTEX, the results showed that MTBE might enhance whereas ETBE might inhibit the degradation of BTEX though at a lower level. In addition, less degradation of MTBE and ETBE was observed in organic-rich soil in all the cases, probably because that there are more other substrates available for the microorganisms in organic-rich soil.</p>
|
99 |
ETBE as an additive in gasoline: advantages and disadvantagesYuan, Hong January 2006 (has links)
The most widely used gasoline additive methyl tert-butyl ether (MTBE) has been questioned recently, since frequent detection of this compound in groundwater indicates that it could be a risk to our environment. Consequently, legislative efforts have been made by some local governments to phase out the use of MTBE. Among a number of alternative substitutes, ethyl tert-butyl (ETBE) seems to be the more promised one due to its lower water solubility, suggesting that it could pose less impact to our water supply. However, a thorough understanding of its environmental fate is needed before ETBE is widely accepted as a more environmentally friendly gasoline additive. As a part of this effort, the degradation of MTBE and ETBE as well as their effects on the fate of aromatic gasoline components, i.e. BTEX (benzene, toluene, ethyl-benzene and xylenes) were studied on two soils contaminated with MTBE-blended or ETBE-blended gasoline. During a period of 5 months, the general aerobic degradation of the gasoline and its different additives were monitored by gas chromatography – thermal conductivity detection (GC-TCD) and concentration changes of MTBE and ETBE were monitored with the help of gas chromatography - mass spectrometry (GC-MS). The results of this study showed that the degradation of MTBE, ETBE and BTEX occurred in all the systems, nevertheless MTBE and ETBE degraded far more slowly in contrast with the degradation of BTEX, indicating that MTBE and ETBE are more persistent. When the degradation of MTBE and ETBE were compared, ETBE decreased a little faster than MTBE, implying that ETBE advantages slightly in degradation over MTBE. Concerning the effects of MTBE and ETBE on the fate of BTEX, the results showed that MTBE might enhance whereas ETBE might inhibit the degradation of BTEX though at a lower level. In addition, less degradation of MTBE and ETBE was observed in organic-rich soil in all the cases, probably because that there are more other substrates available for the microorganisms in organic-rich soil.
|
100 |
Pulsed Biosparging of the E10 Gasoline Source in the Borden AquiferLambert, Jennifer January 2008 (has links)
Air sparging is a technique used to remediate gasoline contamination. In sparging, air is injected below the target zone and removes contamination via two separate mechanisms; volatilization and biodegradation. In volatilization, the air contacts the contamination as it moves upward. The contaminant will partition to the vapor phase based on its volatility and will be removed as the air reaches the atmosphere. For biodegradation, the oxygen in the airstream is used for microbial activity. Pulsed air sparging, otherwise known as pulsed biosparging, has been found to be more effective than continuous air sparging. Pulsed biosparging enhances treatment because it induces groundwater movement and mixing.
The general mechanisms for treatment of gasoline sources using air sparging are relatively well characterized. However, air flow through the subsurface and the total hydrocarbon mass lost are difficult to predict and quantify. This project was intended to quantify the mass lost through volatilization and through biodegradation at the E10 gasoline source using pulsed biosparging, and to determine the effect of the source zone removal on downgradient dissolved BTEX concentrations.
The remedial system consisted of two major components: the air sparging system, with three injection points; and a soil gas collection system. The soil gas collection system was comprised of an airtight box that covered the source area and the monitoring wells upgradient and downgradient of the source. Off-gas from the soil gas collection system was monitored continuously using a PID. The off-gas was also sampled frequently for BTEX, pentane, and hexane to determine the hydrocarbon mass removed; and for O2 and CO2 to determine biodegradation rates.
The remedial system ran for approximately 280 hours over 33 days. Of the estimated 22.3 kg of gasoline residual in the source zone, 4.6 kg or 21% of the residual was removed via volatilization and 4.9 kg or 22% of the residual was removed via biodegradation. Leakage outside the system was estimated at less than 0.1% of the total mass. Groundwater samples were collected when the last sparged air was calculated to arrive at the row 2 downgradient fence. The average BTEX groundwater concentration after sparging was 40% of the pre-sparging concentration. The benzene mass discharge decreased 27%, the ethylbenzene mass discharge decreased 65%, the p/m-xylene mass discharge decreased 6%, and the o-xylene mass discharge decreased 5%. The mass discharge for naphthalene and TMB isomers increased 19%. However, these values fit in with long-term groundwater concentration trends. Additional sampling is recommended to determine if the sparging made a significant impact on mass discharge leaving the source.
|
Page generated in 0.0552 seconds